Britpart Parts

Lamp assy RH OEM

Starlock Washer - a push-on retaining washer used to secure components onto plain shafts and rods without the need for threading or tools. Once pr...

Improve your driving comfort with this high-quality wind deflector kit, custom-designed for the Land Rover Freelander 2. These deflectors help redu...

Crown Wheel & Pinion for the Intermediate Reduction Drive (IRD) unit. The IRD sits between the gearbox output and the rear driveline, turning ...

Allen Head Screw is a body fixing used on the hinged windscreen frame of classic Defender models. The socket (Allen) head allows the screw to be d...

Service Filter Kit - the filter set for a scheduled service of the 4.4 litre TDV8 diesel engine. The kit contains the engine oil filter, two air f...

The OEM Filter Service Kit for the Range Rover Sport 3.6 V8 Diesel (2005 - 2009) simplifies vehicle maintenance by providing all the essential part...

Swivel Pin Kit overhauls the upper swivel pins of the front axle swivel housings, the pivots the housings turn on for steering. Worn upper pins an...

Hex-head screw, 5/16" UNF thread, 1-1/4" long. Unified Fine (UNF) thread form with a hexagonal head for use with standard imperial spanners and so...

Screw is a fastener used in cooling and heating system assemblies on Land Rover vehicles.

Brake Pad Set for the front axle disc brake assembly, for use with vented front discs. The pads locate within the front calipers and clamp against ...

Front Brake Pad Set - XS for the front braking system, comprising the friction pads that seat in the front calipers. Under hydraulic pressure the ...

Brake Pad Set - Front - Britpart XD

Bolt used in multiple assembly applications including towing equipment, engine mounting, front stabilizer bar, ACE system, and seat belt anchorage.

Maintain the stability and performance of your Land Rover's rear axle with this high-quality Rear Wheel Hub Assembly. Designed to meet OEM specific...

Track Rod End for the left-hand side of the steering track rod linkage. The track rod end forms the articulating ball-joint that connects the track...

Track Rod End for the right-hand side of the steering track rod linkage. The track rod end forms the articulating ball-joint that connects the trac...

lower pipe ACE front valve block to actuator, low pressure

Adjustable A-Frame Ball Joint for the rear suspension upper link (A-frame) assembly. The joint sits at the apex of the A-frame and connects the up...

Steering Wheel Nut - the M14 hex retaining nut that secures the steering wheel to the steering column. It clamps the wheel onto the splined upper ...

Reservoir bracket

Split Pin: a cotter pin that locks a slotted (castle) nut or retains a clevis pin. After fitting, its legs are bent back to stop the fastening work...

Clevis Pin for the handbrake (transmission parking brake) linkage. This 22mm clevis pin connects the handbrake operating rod to the relay lever, t...

Oil Cooler Housing End Cap - LH - the left-hand end cap that closes the engine oil cooler housing on the 2.0 L Series diesel. The oil cooler housi...

bracket exhaust OEM - 90" 4-cyl N/A diesel and 90" 4-cyl petrol (except MPI)

Hose Clip is an adjustable worm-drive band clip that clamps a flexible hose onto its spigot or fitting. It tightens over the hose with a screw-dri...

Door Check Buffer Stop is the long buffer fitted to the lever-type stay of the rear end door check mechanism. It cushions the stay at the end of th...

Rear Brake Pad Set for vehicles built with the size 19 front and rear disc and caliper package, supplied as a complete rear axle set - one kit cove...

Brake Pad Set - Rear - friction pad axle set for the rear disc brake assembly. The pads locate in the rear caliper carriers and clamp against the ...

Brake Pad Set - Rear - friction pad set for the rear brake discs and calipers assembly, supplied as a complete axle set covering both rear wheels. ...

Rear Brake Disc - a vented disc from the rear brake disc and caliper assembly. The disc is mounted on the rear hub behind the road wheel and rotat...

Brake Pad Set for the rear axle disc brake assembly. The friction pads locate within the rear caliper and are clamped against the brake disc to ge...

Front Brake Pads Britpartxs

Brake Pads - Front - friction pads for the front axle of the uprated Brembo front brake assembly. The pads sit in the fixed Brembo caliper and cla...

Brake Pad Set - Front - friction pad set for the front brake discs and calipers assembly, supplied as a complete axle set covering both front wheel...

Rear Brake Pad Set for the rear disc brake assembly. These pads are installed in the rear brake caliper and press against the brake disc to delive...

Brake Pad Set - Rear

Brake Disc is a rear brake disc within the rear axle braking assembly, 325mm in diameter. The disc provides the friction surface the brake pads cl...

Axle Shaft for the rear axle – the left-hand outer stub (half) shaft. It transmits drive from the differential through to the rear hub, forming th...

Axle Shaft for the rear axle – the right-hand outer stub (half) shaft. It transmits drive from the differential through to the rear hub, forming t...