for Discounts / VAT
for Discounts & Correct VAT
Parts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
Name Plate - the moulded plastic 'LAND ROVER' oval badge fitted to the front of the vehicle. A direct replacement for a faded, cracked or missing ...
View full detailsOil Cooler Seal for the oil cooler and filter assembly on the 2.2L Td4 Diesel engine. The seal maintains a leak-tight joint at the oil cooler and ...
View full detailsCoolant Hose connecting the engine oil cooler to the manifold within the cooling circuit of the 2.2L Td4 Diesel. The oil cooler on this engine is ...
View full detailsCylinder Head Front Cover Gasket for the 2.2 Td4 diesel engine. It seals the joint between the cylinder head front cover and the cylinder head, pr...
View full detailsWindscreen to Bulkhead Gasket seals the joint between the lower rail of the windscreen frame and the bulkhead top panel. It fits along the mating ...
View full detailsRear End Door Seal is the floor section of the seal running along the lower edge of the rear end door aperture. It seals the bottom of the rear do...
View full detailsWindscreen Frame to Bulkhead Seal fits between the base of the windscreen frame and the top face of the bulkhead. It seals the joint where the win...
View full detailsRoof Assembly Seal for the body weather-sealing system. This seal fits at the roof assembly, forming the weather seal between the roof panel and t...
View full detailsEngine Temperature Sensor monitors coolant temperature within the engine cooling circuit. It reports coolant temperature to the engine control mod...
View full detailsEGR Cooler Gasket seals the mounting joint between the EGR cooler and the exhaust gas recirculation circuit on the 2.2L Puma diesel engine. It mai...
View full detailsFuel Injector Grommet - a sealing grommet that locates and retains a fuel injector where it passes through the cylinder head cover. It seals aroun...
View full detailsHeater Hose - a coolant hose within the heating and ventilation (HVAC) circuit. It carries engine coolant between the cooling system and the heate...
View full detailsEGR Gasket for the exhaust gas recirculation (EGR) system. Seals the flanged joint between the EGR valve and its mating pipework, containing recir...
View full detailsExhaust Clamp securing a joint in the exhaust system. It clamps adjoining exhaust sections together to hold the joint tight and gas-sealed.
Inlet Manifold Gasket for the 2.2-litre turbo-diesel engine, sealing the joint between the inlet manifold and the cylinder head. It maintains an a...
View full detailsInjector Ring Seal for the Puma 2.2L TDCi 4-cylinder turbo diesel engine, seating in the injector bore in the cylinder head. The seal forms a gas-...
View full detailsDrive Belt is the auxiliary (serpentine) drive belt that transmits power from the crankshaft pulley to the engine ancillaries. Routed around the a...
View full detailsEGR Cooler Gasket for the 2.2L Puma diesel engine, sealing a flanged joint in the exhaust gas recirculation (EGR) circuit. It seals the mating fac...
View full detailsFuel Injector Clamp Bolt for the 2.2L 16-valve turbo diesel four-cylinder (Puma) engine. It secures the injector hold-down clamp that retains a fu...
View full detailsGlow Plug for the 2.2L 16-valve turbo diesel four-cylinder (Puma) engine. One glow plug is fitted per cylinder in the cylinder head. When the igni...
View full detailsWater Outlet Connection for the 2.2L 16-valve turbo diesel four-cylinder (Puma) engine. It forms the coolant outlet junction on the engine, provid...
View full detailsFront Door Lower Seal fitting along the lower edge of the front door aperture. It seals the door against the sill, preventing water ingress and dra...
View full detailsRubber Pad is a butyl sealing pad used in the body sealing system to block water ingress at the lower body and door seal interface. The pliable bu...
View full detailsSpacer used at the rear seat frame mounting in the load area. It sits between the seat frame and its mounting point on the body, setting the correc...
View full detailsClevis Pin - Brake Pedal - the pivot pin in the brake pedal actuation linkage. The pin passes through the clevis on the brake servo pushrod and th...
View full detailsEngine Cover - 2.4 Diesel
Pipe - Fuel
Fuel Feed Pipe for the auxiliary (extra) fuel tank installation. The pipe carries fuel from the extra tank pick-up into the fuel supply line, link...
View full detailsExhaust Manifold Gasket - sealing gasket for the exhaust manifold of the 2.4L Duratorq-TDCi HPCR diesel engine. It seals the joint between the exh...
View full detailsTrim Clip, male half, used in the facia and dash trim assembly. The clip is the male part of a two-piece push-fit fastener. It locates in the trim...
View full detailsAdaptor
Relay - Direction Indicator Flasher is the electronic flasher unit that sets the pulse rate of the direction indicator and hazard warning circuits....
View full detailsDecal - Name Plate
ECU - One-Touch Rear Fog Lamp is the control module for the one-touch rear fog lamp function in the exterior lighting circuit. The unit takes a mo...
View full detailsFront Left-Hand Mudflap in black with a white printed logo, supplied individually. It mounts behind the front wheel to deflect road spray, mud and...
View full detailsMudflap for the front of the vehicle, moulded in black with a white logo. It mounts behind the front wheel to catch water, mud and road debris thr...
View full detailsDamper Mounting Bush - Lower - isolating bush for the lower shock absorber mounting. The bush sits between the damper mounting and its bracket, is...
View full detailsRadiator Hose - the top coolant hose in the engine cooling circuit. It carries heated coolant from the engine outlet to the top of the radiator, wh...
View full detailsRear Lamp combining the stop and tail light functions in a single 12-volt unit. Mounted at the rear of the vehicle, it provides both the tail (pos...
View full detailsWire Assembly
Crankshaft Oil Seal for the Puma TDCi diesel engine. Seals the crankshaft where it passes through the cylinder block, preventing engine oil from l...
View full detailsDoor Hinge for the front door. This is the lower hinge for the left-hand front door, supporting the door on the body and allowing it to pivot open...
View full detailsMudflap
Mudflap for the exterior bodywork. The mudflap mounts behind the wheel to deflect road spray, mud and debris thrown up by the tyre, protecting the...
View full detailsDoor Hinge for the front door. This is the lower hinge for the right-hand front door, supporting the door on the body and allowing it to pivot ope...
View full detailsCylinder Head Cover Retainer for the 2.4L Duratorq TDCi diesel engine. The retainer secures the cylinder head cover (cam cover) to the cylinder he...
View full detailsO-Ring for the diesel fuel injection system. It forms a fuel-tight seal at the injector, within the fuel injectors and pipes assembly. Supplied as...
View full detailsPressure Relief Valve for the fuel injector leak-off circuit on the 2.4L Duratorq TDCi HPCR diesel engine. It maintains the correct residual press...
View full detailsParts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
This collection covers the classic Land Rover Defender produced from 1983 to 2016, in three body lengths: the 90 (short wheelbase), the 110 (long wheelbase), and the 130 (crew cab and high-capacity load variants). These span two platform designations. L315 refers to the earlier platform in use from 1983. L316 refers to the revised platform introduced in the early 1990s and used through to final production in January 2016.
This collection does not cover the current-generation Defender L663, introduced in 2020. Parts for the L663 are held separately under Land Rover Defender parts.
Engine FamiliesFour diesel engine families account for the majority of classic Defender rebuilds and restorations supported by this collection.
The 200Tdi was introduced in 1990 and produced through to 1994. It is a direct-injection turbodiesel known for mechanical simplicity. Common service and rebuild requirements include the head gasket, water pump, injector seals, and thermostat.
The 300Tdi ran from 1994 to 1998. It uses a belt-driven timing system and a revised cylinder head. Timing belt and water pump replacement is the highest-priority service interval on this engine. Complete timing kit assemblies for the 300Tdi are stocked.
The TD5 ran from 1998 to 2007 and was Land Rover's first electronically managed Defender engine. It introduced an integrated injector harness routed through the rocker cover, a revised fuel delivery system, and full ECU control. Commonly replaced components include the rocker cover gasket, injector harness, and exhaust manifold.
The Puma TDCi variants ran from 2007 to 2016. A 2.4 litre unit was used from 2007 to 2011, replaced by a 2.2 litre unit from 2011 onwards. Common service requirements include EGR components, cooling system parts, and turbo-related items.
Defenders built before 1990 and fitted with earlier units including the 2.25 petrol, 2.5 normally-aspirated diesel, or V8 petrol are also supported where parts cross-reference with the L315 platform. Use the engine filter or search by OEM part number for these variants.
Engine family production date ranges per Land Rover workshop manual specifications and the Land Rover parts catalogue for L315 and L316 platforms.
Some components differ between the 90, 110, and 130. Propshafts, chassis outriggers, fuel tanks, body tub sections, and wheelbase-specific brackets are body-length dependent. Where a part is specific to one or two body lengths, the product listing states this.
Components that fit across all three body lengths include most engine parts, brake components, axle rebuild kits, and electrical items. No body-length filter is needed for those categories.
Quality TiersParts in this collection are available in three quality tiers, each suited to different rebuild priorities and budgets.
Genuine Land Rover parts are original components produced by or for Land Rover to factory specification. These are the correct choice where an exact factory-spec replacement is required.
OEM-equivalent parts are produced by the original component manufacturer, often the same supplier that produced the part for Land Rover during original production. These offer factory-level quality at a lower price point than branded genuine parts and are widely used in professional workshop settings.
Aftermarket parts are third-party manufactured alternatives. Quality varies by supplier and application. For high-wear consumable items these are frequently a practical and cost-effective choice.
Use the quality filter on the left to narrow results by tier.
VIN LookupThe 17-character VIN on your Defender's identification plate encodes the body variant, engine family, and model year. For any part where fitment is uncertain, the VIN is the most reliable starting point for confirmation.
Budget Parts supports VIN-based fitment enquiries via the contact page. If you are unsure whether a part is correct for your specific Defender, use the part number search or submit an enquiry before ordering.
Related CategoriesSearching for a specific part type rather than browsing the full catalogue? The following collections group classic Defender components by category:
Propshafts, universal joints, and drivetrain rebuild components.
Land Rover driveshaft parts →The most reliable method is the VIN plate, usually found on the driver's side A-post or on a plate inside the door aperture. The engine code within the VIN confirms the engine family. As a general guide based on production dates: the 200Tdi was fitted from 1990 to 1994, the 300Tdi from 1994 to 1998, the TD5 from 1998 to 2007, and the Puma TDCi from 2007 to 2016. Defenders built before 1990 used earlier petrol and diesel units. The engine stamp on the block itself also confirms the variant if the VIN plate is absent or damaged.
No. Classic Defenders use era-specific loom designs that are not interchangeable between engine generations. The TD5 uses a loom that integrates with the ECU and routes the injector harness through the rocker cover, which is incompatible with earlier Tdi wiring architecture. Puma TDCi looms differ again due to the revised engine management system. Always match the loom to both the engine family and body length (90, 110, or 130) when ordering.
Wheelbase-specific components include propshafts, fuel tanks, chassis outriggers, body tub sections, and some bracket assemblies. Most mechanical components are shared across all three body lengths, including engine internals, brake components, axle rebuild parts, and the majority of electrical items. Product listings on this page state body-length fitment where it is relevant.
Some parts do cross-reference between the classic Defender and the Discovery 1, particularly for the 200Tdi engine, which shares components with the Discovery 1 200Tdi unit. Axle components also overlap to a degree between the two platforms. Cross-referencing by part number is essential before ordering, as not all apparently similar parts are dimensionally or functionally interchangeable. Use the part number search or contact Budget Parts with your VIN if you are unsure.
Genuine parts are Land Rover-branded components produced to original factory specification. OEM-equivalent parts are made by the original component supplier, often the same manufacturer that supplied Land Rover during production, and offer comparable quality without the Land Rover brand premium. Aftermarket parts are third-party alternatives that vary in quality by supplier. All three tiers are available in this collection and can be filtered using the quality selector.
The final classic Defender left the Solihull production line in January 2016, marking the end of a model that had been in continuous production since 1983. The current-generation Defender L663 is a separate vehicle on a different platform and is not covered by this collection.
The following guides cover engine-specific maintenance and component topics relevant to the Defender models in this collection. Each article provides detailed technical context and links back to the relevant parts.
A technical reference covering the 300Tdi engine's known weak points, service priorities, and the components most commonly required for a full rebuild or preventive overhaul.
Defender 300Tdi guide →Covers the TD5 exhaust manifold cracking failure in detail, including inspection method, replacement options, and why stud quality matters for a lasting repair.
Td5 exhaust manifold guide →A maintenance and fault reference for the Puma 2.4 TDCi engine fitted to post-2007 Defenders, covering EGR, cooling, and turbo-related service requirements.
Defender 2.4 TDCi guide →