for Discounts / VAT
for Discounts & Correct VAT
Parts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
Heater Hose connecting the heater to the engine coolant pipe, part of the heater pipes and hoses assembly. The hose forms part of the coolant path...
View full detailsHeater Hose connecting the heater to the engine coolant pipe, part of the heater pipes and hoses assembly. The hose forms part of the coolant path...
View full detailsEngine Mounting is a rubber-to-metal anti-vibration mount in the engine mounting assembly, supporting the petrol engine on the chassis frame. The ...
View full detailsDoor Hinge is the upper front door hinge for the right-hand side, part of the front door mounting assembly. It bolts to the body pillar and to the...
View full detailsCapping - LH is the top capping panel for the left-hand rear corner of the body. This pressed steel capping closes the upper edge of the rear corn...
View full detailsRear Body Capping is the capping strip fitted along the top edge of the rear body side, covering and protecting the exposed panel edge and giving t...
View full detailsA-Post Trim is the interior trim panel that covers the A-pillar (the windscreen pillar), concealing the body structure and any wiring routed throug...
View full detailsSeat Mounting Bracket is the structural mounting point that locates and supports the rear forward-facing split seat, securing the seat base to the ...
View full detailsBonnet Reinforcement - Spare Wheel Ring is a structural reinforcing ring fitted to the bonnet to support a bonnet-mounted spare wheel. It spreads ...
View full detailsFront Door Striker - the striker that the front door latch engages to hold the door closed. It fixes to the body pillar and provides the catch poi...
View full detailsBonnet Spare Wheel Support Plate - a reinforced plate that forms the mounting base for a bonnet-mounted spare wheel. It fixes to the bonnet panel ...
View full detailsSpare Wheel Carrier U-Bolt - a U-shaped clamping bolt that secures the spare wheel carrier to the rear door. It passes around the carrier mounting...
View full detailsRear Mudflap >AA - 90 - LH
Door Check Strap Link - left-hand front door check link, round type. The check link connects the door to the body pillar and limits the door's ope...
View full detailsAshtray Retainer - mounting bracket that secures the ashtray assembly into the upper dashboard crash pad. It locates and holds the ashtray housing...
View full detailsWasher Plate
Weatherseal for the sliding glass in the front door top frame, part of the door glazing and sealing assembly. The seal runs along the glazing chan...
View full detailsGlass
Fixing Plate fitted at the rear of the tailgate latch, from the tailgate assembly. The plate backs the latch mounting on the tailgate, providing t...
View full detailsDoor Check Strap Bracket – Rear – RH mounts the door check strap on the right-hand rear side door. The check strap limits how far the door swings ...
View full detailsRubber Floor Mat - complete moulded rubber floor covering for the footwell. Provides a fitted, washable floor surface.
Sprocket, Fuel Pump Drive
Oil Cooler Seal for the oil cooler and filter assembly on the 2.2L TD4 Diesel. This seal maintains the oil-tight joint at the oil cooler and filte...
View full detailsDoor Lock Cover Plate Seal for the rear-end door latch assembly. The gasket seals the lock cover plate against the door, keeping water and dust ou...
View full detailsExhaust Clamp for the Puma diesel exhaust system, on installations fitted with a diesel particulate filter (DPF). The clamp joins two sections of ...
View full detailsTiming Chain Tensioner
Rear Side Door Seal for the left-hand rear side door. It seals the perimeter of the door aperture against the body frame, keeping out water, dust a...
View full detailsRear Tailgate Side Seal Hcpu
Tailgate Lock Plate - Branded Galvanised is a galvanised striker plate for the cable-retained tailgate. It provides the anchor point for the tailg...
View full detailsRear Fog Lamp Assembly for the Defender, incorporating the direction indicator and reverse light functions within the same housing unit. Replaces a...
View full detailsFloor Mat - Rear is a moulded rubber floor mat for the rear of the vehicle. It protects the rear floor, providing a hard-wearing, washable surface.
Sealing Ring for the 2.4L Duratorq TDCi diesel, sealing the thermostat into its metal housing on the engine. It forms the coolant-tight seal betwe...
View full detailsThermostat Assembly for the 2.4L Duratorq TDCi diesel, mounted in the oil cooler and filter housing. It regulates coolant flow to bring the engine...
View full detailsBracket - Support Galvanised
Bulkhead Seal for the dash ventilation aperture on Defender models without air conditioning. This rubber seal fits between the dash ventilator ass...
View full detailsRear propshaft 130"" from 2A637980
Shield Brake Disk
Differential Lock Switch mounted on top of the transfer gearbox. It senses engagement of the differential lock and completes the circuit to the das...
View full details5th Gear Housing Gasket for the LT85 5-speed manual gearbox. Seals the joint between the fifth-gear housing (rear extension) and the gearbox casin...
View full detailsSpecial Bolt for the LT85 5-speed manual gearbox. Gearbox fastener used within the LT85 assembly. Fitted to the 3.5L V8 petrol application.
Seat Belt Assembly Active Front Long End with Soft Top
Seat Belt Assembly Active Front Long End with Soft Top
Pulley 2 Grooves
Camshaft Oil Seal seals the camshaft on the 2.5L 4-cylinder diesel engines, including the 200TDi. Fitted at the front of the engine where the cams...
View full detailsLinkage
Grab Handle for the rear end door, mounted externally on the rear door casing. It provides a fixed handhold at the rear of the vehicle, giving a s...
View full detailsIntercooler Hose forms part of the turbocharger charge-air circuit, connecting the intercooler outlet to the inlet manifold. It carries cooled, pr...
View full detailsRadiator Top Hose for the 2.5L 300 TDi 4-Cylinder Turbo Diesel engine cooling system. This hose connects the engine coolant outlet at the thermost...
View full detailsParts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
This collection covers the classic Land Rover Defender produced from 1983 to 2016, in three body lengths: the 90 (short wheelbase), the 110 (long wheelbase), and the 130 (crew cab and high-capacity load variants). These span two platform designations. L315 refers to the earlier platform in use from 1983. L316 refers to the revised platform introduced in the early 1990s and used through to final production in January 2016.
This collection does not cover the current-generation Defender L663, introduced in 2020. Parts for the L663 are held separately under Land Rover Defender parts.
Engine FamiliesFour diesel engine families account for the majority of classic Defender rebuilds and restorations supported by this collection.
The 200Tdi was introduced in 1990 and produced through to 1994. It is a direct-injection turbodiesel known for mechanical simplicity. Common service and rebuild requirements include the head gasket, water pump, injector seals, and thermostat.
The 300Tdi ran from 1994 to 1998. It uses a belt-driven timing system and a revised cylinder head. Timing belt and water pump replacement is the highest-priority service interval on this engine. Complete timing kit assemblies for the 300Tdi are stocked.
The TD5 ran from 1998 to 2007 and was Land Rover's first electronically managed Defender engine. It introduced an integrated injector harness routed through the rocker cover, a revised fuel delivery system, and full ECU control. Commonly replaced components include the rocker cover gasket, injector harness, and exhaust manifold.
The Puma TDCi variants ran from 2007 to 2016. A 2.4 litre unit was used from 2007 to 2011, replaced by a 2.2 litre unit from 2011 onwards. Common service requirements include EGR components, cooling system parts, and turbo-related items.
Defenders built before 1990 and fitted with earlier units including the 2.25 petrol, 2.5 normally-aspirated diesel, or V8 petrol are also supported where parts cross-reference with the L315 platform. Use the engine filter or search by OEM part number for these variants.
Engine family production date ranges per Land Rover workshop manual specifications and the Land Rover parts catalogue for L315 and L316 platforms.
Some components differ between the 90, 110, and 130. Propshafts, chassis outriggers, fuel tanks, body tub sections, and wheelbase-specific brackets are body-length dependent. Where a part is specific to one or two body lengths, the product listing states this.
Components that fit across all three body lengths include most engine parts, brake components, axle rebuild kits, and electrical items. No body-length filter is needed for those categories.
Quality TiersParts in this collection are available in three quality tiers, each suited to different rebuild priorities and budgets.
Genuine Land Rover parts are original components produced by or for Land Rover to factory specification. These are the correct choice where an exact factory-spec replacement is required.
OEM-equivalent parts are produced by the original component manufacturer, often the same supplier that produced the part for Land Rover during original production. These offer factory-level quality at a lower price point than branded genuine parts and are widely used in professional workshop settings.
Aftermarket parts are third-party manufactured alternatives. Quality varies by supplier and application. For high-wear consumable items these are frequently a practical and cost-effective choice.
Use the quality filter on the left to narrow results by tier.
VIN LookupThe 17-character VIN on your Defender's identification plate encodes the body variant, engine family, and model year. For any part where fitment is uncertain, the VIN is the most reliable starting point for confirmation.
Budget Parts supports VIN-based fitment enquiries via the contact page. If you are unsure whether a part is correct for your specific Defender, use the part number search or submit an enquiry before ordering.
Related CategoriesSearching for a specific part type rather than browsing the full catalogue? The following collections group classic Defender components by category:
Propshafts, universal joints, and drivetrain rebuild components.
Land Rover driveshaft parts →The most reliable method is the VIN plate, usually found on the driver's side A-post or on a plate inside the door aperture. The engine code within the VIN confirms the engine family. As a general guide based on production dates: the 200Tdi was fitted from 1990 to 1994, the 300Tdi from 1994 to 1998, the TD5 from 1998 to 2007, and the Puma TDCi from 2007 to 2016. Defenders built before 1990 used earlier petrol and diesel units. The engine stamp on the block itself also confirms the variant if the VIN plate is absent or damaged.
No. Classic Defenders use era-specific loom designs that are not interchangeable between engine generations. The TD5 uses a loom that integrates with the ECU and routes the injector harness through the rocker cover, which is incompatible with earlier Tdi wiring architecture. Puma TDCi looms differ again due to the revised engine management system. Always match the loom to both the engine family and body length (90, 110, or 130) when ordering.
Wheelbase-specific components include propshafts, fuel tanks, chassis outriggers, body tub sections, and some bracket assemblies. Most mechanical components are shared across all three body lengths, including engine internals, brake components, axle rebuild parts, and the majority of electrical items. Product listings on this page state body-length fitment where it is relevant.
Some parts do cross-reference between the classic Defender and the Discovery 1, particularly for the 200Tdi engine, which shares components with the Discovery 1 200Tdi unit. Axle components also overlap to a degree between the two platforms. Cross-referencing by part number is essential before ordering, as not all apparently similar parts are dimensionally or functionally interchangeable. Use the part number search or contact Budget Parts with your VIN if you are unsure.
Genuine parts are Land Rover-branded components produced to original factory specification. OEM-equivalent parts are made by the original component supplier, often the same manufacturer that supplied Land Rover during production, and offer comparable quality without the Land Rover brand premium. Aftermarket parts are third-party alternatives that vary in quality by supplier. All three tiers are available in this collection and can be filtered using the quality selector.
The final classic Defender left the Solihull production line in January 2016, marking the end of a model that had been in continuous production since 1983. The current-generation Defender L663 is a separate vehicle on a different platform and is not covered by this collection.
The following guides cover engine-specific maintenance and component topics relevant to the Defender models in this collection. Each article provides detailed technical context and links back to the relevant parts.
A technical reference covering the 300Tdi engine's known weak points, service priorities, and the components most commonly required for a full rebuild or preventive overhaul.
Defender 300Tdi guide →Covers the TD5 exhaust manifold cracking failure in detail, including inspection method, replacement options, and why stud quality matters for a lasting repair.
Td5 exhaust manifold guide →A maintenance and fault reference for the Puma 2.4 TDCi engine fitted to post-2007 Defenders, covering EGR, cooling, and turbo-related service requirements.
Defender 2.4 TDCi guide →