for Discounts / VAT
for Discounts & Correct VAT
Parts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
Coolant Hose for the fuel cooler return line. This hose returns coolant from the fuel cooler back to the engine cooling circuit, carrying off the ...
View full detailsOil Cooler - the replacement cooler element for the Td5 2.5L 5-cylinder turbo diesel engine oil cooling circuit. This is the finned heat-exchanger...
View full detailsRadius Arm Bush Set - polyurethane bushes for the front radius arm mountings at the axle end of the arm, supplied as a set of four in black. The b...
View full detailsRadiator Top Hose in the engine cooling circuit, connecting the radiator to the upper coolant pipe. It carries heated coolant from the engine's up...
View full detailsAir cleaner to carburettor hose
Transfer Box Lever Lock Nut used to secure the selector linkage at the transfer case. This half nut (thin profile locking nut) threads onto the sel...
View full detailsCoil Spring for the front suspension, left-hand (passenger) side road spring position. This road coil spring seats between the chassis spring seat...
View full detailsFront Road Coil Spring for the front suspension, right-hand side. This coil spring supports the front of the vehicle at its road ride height, worki...
View full detailsWheel Nut for alloy wheel fitment on Defender, Discovery 1 and Range Rover Classic. This tapered-seat wheel nut is designed for use with alloy whe...
View full detailsLower Strut Gaiter for the rear self-levelling suspension unit. This flexible rubber boot fits over the lower ball joint of the self-levelling str...
View full detailsFront Shock Absorber Turrets: the tubular mounting towers that locate the upper end of the front dampers. Each turret bolts to the chassis and pro...
View full detailsShock Absorber Bush Set (4) - Rear Upper - Polyurethane is the upper mounting bush for the rear shock absorber, where the damper attaches to its bo...
View full detailsShock Absorber Bush - Rear Upper is the mounting bush at the upper end of the rear shock absorber, where the damper attaches to its body mounting. ...
View full detailsTank Mounting Spacer - a spacer used in the fuel tank mounting assembly. It sets the correct standoff between the tank and its supporting bracketr...
View full detailsDrop Arm Nut secures the steering drop arm onto the splined output (sector) shaft of the steering box. This is the nyloc retaining nut for the dro...
View full detailsBody Side Seal is the left-hand upper rear body side seal, part of the rear body sealing assembly. It runs along the upper edge of the rear body s...
View full detailsClip Nut spring-steel fastener that provides a captive threaded fixing point on panels and brackets. The nut clips over the edge of a panel or sli...
View full detailsRear door sill seal RH
Air Intake Grille for the cold air induction system. This adaptor grille sits at the cold air intake, drawing cooler outside air into the intake d...
View full detailsDoor Lock Link for the front left-hand door, the operating rod that connects the locking mechanism to the door latch. It transfers movement from t...
View full detailsBonnet Latch Bracket - the top plate that carries the bonnet latch mechanism. It mounts across the front body panel and locates the catch that rece...
View full detailsWindscreen Bracket Spacer is a packing piece used in the windscreen mounting assembly, seating between a fixed windscreen bracket and its body moun...
View full detailsMudflap Bracket for the rear left-hand position, the bracket that mounts the rear mudflap to the body behind the wheel. It holds the mudflap (spla...
View full detailsInstrument Cowl for the dashboard, the moulded shroud that fits over the instrument binnacle and frames the main gauge cluster. This is the left-h...
View full detailsHeater Air Intake Valve - the flap valve assembly at the fresh-air inlet of the heater box. It opens and closes the intake to control the flow of o...
View full detailsMudflap Bracket – RH is the right-hand mounting bracket for the mudflap. It secures the mudflap to the body behind the wheel, holding it in positi...
View full detailsBulkhead Mounting Bolt - M12 x 180mm fastener securing the lower bulkhead to the chassis. Forms part of the body-to-chassis mounting at the base o...
View full detailsWing Fixing Plate is a two-stud captive stud plate used in the front body mounting assembly, where it secures the front wing to the radiator (front...
View full detailsSealing Washer seals the timing chain tensioner at the point where it threads into the engine, forming a leak-tight joint at the tensioner mounting...
View full detailsRear Chassis Extension (Long), a structural repair section for the rear of the ladder-frame chassis. It renews the rearmost length of the chassis ...
View full detailsClutch Slave Cylinder is the hydraulic actuator in the clutch release circuit, converting pressurised fluid from the clutch master cylinder into me...
View full detailsLock Set - door and steering-column locking set for the vehicle security system. The set includes two door lock barrels, two matching keys and the...
View full detailsShock Absorber – Rear is the rear suspension damper, part of the Shock Absorbers & Springs assembly. It mounts between the rear axle and the c...
View full detailsTemperature sensor
Radiator Grille - the front grille panel that fits in the front body aperture ahead of the radiator. It admits cooling airflow to the radiator whi...
View full detailsSide Step Set is a pair of side steps (running boards) that mount along the lower body sills to aid entry to and exit from the vehicle. Each step ...
View full detailsInjector sealing washer 2.4 Puma
Sleeve OEM
Timing Belt Tensioner maintains correct tension on the timing belt of the 300 TDi 2.5L turbo diesel. The sprung tensioner pulley bears against the...
View full detailsBrake Disc Mud Shield - Front, LH, mounted behind the left-hand front brake disc. The shield sits between the stub axle / hub and the brake disc, ...
View full detailsExternal Circlip for the R380 manual gearbox selector yoke. The circlip locates in the groove on the selector yoke and retains it in position with...
View full detailsPlain Washer is a flat load-spreading washer used in the front axle hub and drive shaft assembly. It sits beneath the retaining fastener to distri...
View full detailsDifferential Pinion Mud Shield for the front or rear axle differential. It fits behind the pinion drive flange, shrouding the pinion oil seal and ...
View full detailsGear Lever Grommet for the 5-speed manual gearchange assembly. It seals around the gear lever where it passes through the housing, sealing out dra...
View full detailsO-Ring - Gear Change Selector seals the gear change selector shaft where it enters the transmission housing, preventing lubricant leakage at the sh...
View full detailsStub Axle is the front stub axle of the front hub assembly. It bolts to the swivel housing and carries the front hub bearings, on which the hub and...
View full detailsOil Seal for the front cover of the LT85 five-speed manual gearbox. It seals the front cover where the primary (input) shaft enters the gearbox, re...
View full detailsPlenum to Water Jacket Gasket seals the joint between the plenum chamber and the water-jacketed intake manifold in the Rover V8 EFI induction syste...
View full detailsParts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
This collection covers the classic Land Rover Defender produced from 1983 to 2016, in three body lengths: the 90 (short wheelbase), the 110 (long wheelbase), and the 130 (crew cab and high-capacity load variants). These span two platform designations. L315 refers to the earlier platform in use from 1983. L316 refers to the revised platform introduced in the early 1990s and used through to final production in January 2016.
This collection does not cover the current-generation Defender L663, introduced in 2020. Parts for the L663 are held separately under Land Rover Defender parts.
Engine FamiliesFour diesel engine families account for the majority of classic Defender rebuilds and restorations supported by this collection.
The 200Tdi was introduced in 1990 and produced through to 1994. It is a direct-injection turbodiesel known for mechanical simplicity. Common service and rebuild requirements include the head gasket, water pump, injector seals, and thermostat.
The 300Tdi ran from 1994 to 1998. It uses a belt-driven timing system and a revised cylinder head. Timing belt and water pump replacement is the highest-priority service interval on this engine. Complete timing kit assemblies for the 300Tdi are stocked.
The TD5 ran from 1998 to 2007 and was Land Rover's first electronically managed Defender engine. It introduced an integrated injector harness routed through the rocker cover, a revised fuel delivery system, and full ECU control. Commonly replaced components include the rocker cover gasket, injector harness, and exhaust manifold.
The Puma TDCi variants ran from 2007 to 2016. A 2.4 litre unit was used from 2007 to 2011, replaced by a 2.2 litre unit from 2011 onwards. Common service requirements include EGR components, cooling system parts, and turbo-related items.
Defenders built before 1990 and fitted with earlier units including the 2.25 petrol, 2.5 normally-aspirated diesel, or V8 petrol are also supported where parts cross-reference with the L315 platform. Use the engine filter or search by OEM part number for these variants.
Engine family production date ranges per Land Rover workshop manual specifications and the Land Rover parts catalogue for L315 and L316 platforms.
Some components differ between the 90, 110, and 130. Propshafts, chassis outriggers, fuel tanks, body tub sections, and wheelbase-specific brackets are body-length dependent. Where a part is specific to one or two body lengths, the product listing states this.
Components that fit across all three body lengths include most engine parts, brake components, axle rebuild kits, and electrical items. No body-length filter is needed for those categories.
Quality TiersParts in this collection are available in three quality tiers, each suited to different rebuild priorities and budgets.
Genuine Land Rover parts are original components produced by or for Land Rover to factory specification. These are the correct choice where an exact factory-spec replacement is required.
OEM-equivalent parts are produced by the original component manufacturer, often the same supplier that produced the part for Land Rover during original production. These offer factory-level quality at a lower price point than branded genuine parts and are widely used in professional workshop settings.
Aftermarket parts are third-party manufactured alternatives. Quality varies by supplier and application. For high-wear consumable items these are frequently a practical and cost-effective choice.
Use the quality filter on the left to narrow results by tier.
VIN LookupThe 17-character VIN on your Defender's identification plate encodes the body variant, engine family, and model year. For any part where fitment is uncertain, the VIN is the most reliable starting point for confirmation.
Budget Parts supports VIN-based fitment enquiries via the contact page. If you are unsure whether a part is correct for your specific Defender, use the part number search or submit an enquiry before ordering.
Related CategoriesSearching for a specific part type rather than browsing the full catalogue? The following collections group classic Defender components by category:
Propshafts, universal joints, and drivetrain rebuild components.
Land Rover driveshaft parts →The most reliable method is the VIN plate, usually found on the driver's side A-post or on a plate inside the door aperture. The engine code within the VIN confirms the engine family. As a general guide based on production dates: the 200Tdi was fitted from 1990 to 1994, the 300Tdi from 1994 to 1998, the TD5 from 1998 to 2007, and the Puma TDCi from 2007 to 2016. Defenders built before 1990 used earlier petrol and diesel units. The engine stamp on the block itself also confirms the variant if the VIN plate is absent or damaged.
No. Classic Defenders use era-specific loom designs that are not interchangeable between engine generations. The TD5 uses a loom that integrates with the ECU and routes the injector harness through the rocker cover, which is incompatible with earlier Tdi wiring architecture. Puma TDCi looms differ again due to the revised engine management system. Always match the loom to both the engine family and body length (90, 110, or 130) when ordering.
Wheelbase-specific components include propshafts, fuel tanks, chassis outriggers, body tub sections, and some bracket assemblies. Most mechanical components are shared across all three body lengths, including engine internals, brake components, axle rebuild parts, and the majority of electrical items. Product listings on this page state body-length fitment where it is relevant.
Some parts do cross-reference between the classic Defender and the Discovery 1, particularly for the 200Tdi engine, which shares components with the Discovery 1 200Tdi unit. Axle components also overlap to a degree between the two platforms. Cross-referencing by part number is essential before ordering, as not all apparently similar parts are dimensionally or functionally interchangeable. Use the part number search or contact Budget Parts with your VIN if you are unsure.
Genuine parts are Land Rover-branded components produced to original factory specification. OEM-equivalent parts are made by the original component supplier, often the same manufacturer that supplied Land Rover during production, and offer comparable quality without the Land Rover brand premium. Aftermarket parts are third-party alternatives that vary in quality by supplier. All three tiers are available in this collection and can be filtered using the quality selector.
The final classic Defender left the Solihull production line in January 2016, marking the end of a model that had been in continuous production since 1983. The current-generation Defender L663 is a separate vehicle on a different platform and is not covered by this collection.
The following guides cover engine-specific maintenance and component topics relevant to the Defender models in this collection. Each article provides detailed technical context and links back to the relevant parts.
A technical reference covering the 300Tdi engine's known weak points, service priorities, and the components most commonly required for a full rebuild or preventive overhaul.
Defender 300Tdi guide →Covers the TD5 exhaust manifold cracking failure in detail, including inspection method, replacement options, and why stud quality matters for a lasting repair.
Td5 exhaust manifold guide →A maintenance and fault reference for the Puma 2.4 TDCi engine fitted to post-2007 Defenders, covering EGR, cooling, and turbo-related service requirements.
Defender 2.4 TDCi guide →