Land Rover Discovery 2 Parts

Split Pin - a 1.5mm x 12mm cotter pin used to lock a slotted (castle) nut or to retain a clevis pin. Passed through a drilled cross-hole in the sh...

This new Terrafirma winch has a powerful 6hp, 12v motor combined with a 3-stage planetary gearbox that gives over 5 tonnes of pulling power. It has...

Spare Wheel Cover for an externally mounted spare wheel sized 7.50x16 (235/85R16). Constructed from soft vinyl, it shields the spare wheel and tyr...

Bolt is an M8 x 80 mm threaded fastener used to clamp two components together at a bolted joint. It is tightened into a threaded hole or secured w...

Upgrade your Land Rover Discovery 2 with this heavy-duty front winch bumper, designed for strength, durability, and off-road capability. Constructe...

Mud Flap for the left-hand side, covering both the front and rear wheel positions. Part of the exterior body protection. Fitted behind the wheel a...

Snatch Block - a winch recovery pulley used to redirect a winch line or to double its effective pulling capacity. Rated for a 10-tonne working load...

USB Charging Socket - a dashboard-mounted charging socket that fits a standard factory switch aperture, giving a flush, integrated appearance in pl...

Tow Ball 50mm flange-fixing tow ball for use with a bolt-on tow bar drop plate. Rated for a maximum gross trailer weight of 3.5 tonnes, with a D-v...

Mud Flaps shield the bodywork and following traffic from the road spray, mud and stones thrown up by the wheels. Supplied as the right-hand pair f...

Spare Wheel Carrier is the mounting bracket assembly that carries the spare wheel on the rear door. It bolts to the rear door and provides the stu...

Mud Flap Bracket for the left-hand rear position. Part of the rear mud flap mounting. This retention bracket secures the rear mud flap to the body...

Mud Flap Bracket for the right-hand rear position. Part of the rear mud flap mounting. This retention bracket secures the rear mud flap to the bod...

Bonnet Decal - Silver - self-adhesive exterior decal applied to the bonnet, finished in silver.

Land Rover Oval Name Badge - exterior identification emblem carrying the Land Rover name in gold lettering on a green ground. Fitted to the front ...

heavy duty spring front RR/disco pair, like DA4201 and TF014.

Steering Damper mounts in the front steering linkage to absorb kickback and reduce shimmy transmitted from the front axle to the steering wheel. T...

Tow Ball – 50 mm a black-finished towing ball for flange-type towing brackets. The ball bolts to the face of the towing bracket on the standard tw...

Spare Wheel Carrier Spacer in the rear-mounted spare wheel carrier assembly. This spacer fits within the spare wheel carrier mounting to maintain ...

Hook & Loop Fastening Strap for securing and bundling loose items within the vehicle interior, cargo area, or workshop. The strap wraps around ...

Snorkel Head is the 3" ram-air intake head that fits to the top of a raised air intake tube, forming the forward-facing scoop that feeds cool, clea...

Roof Rack Side Rail Gasket for the front roof rack side rail mounting, left-hand upper position. This gasket seats between the front roof rack sid...

Roof Rack Side Rail Gasket for the front roof rack side rail mounting, right-hand upper position. This gasket seats between the front roof rack si...

Roof Rack Side Rail Gasket for the front roof rack side rail mounting, left-hand lower position. This gasket seats between the front roof rack sid...

Roof Rack Side Rail Gasket for the front roof rack side rail mounting, right-hand lower position. This gasket seats between the front roof rack si...

Roof Rack Side Rail Gasket - the rear sealing gasket for the roof rack side rail, part of the roof rack mounting assembly. It sits between the rea...

Roof Rack Side Rail Gasket for the rear roof rack side rail mounting, right-hand side. This gasket seats between the rear roof rack side rail and ...

Spare Wheel Cover for Discovery 1 and Discovery 2, sized to fit a 255mm-wide tyre on a 16- or 18-inch wheel. The cover has a rigid backing panel a...

Swivel Recovery Eye Rotating recovery point that bolts through the recovery-point holes in a winch bumper, providing a secure anchor for a shackle ...

Floor Mat Set — moulded rubber floor mats for the front footwells, protecting the cabin floor and carpet. The tailored rubber mats sit in the driv...

Electronic Differential Lock (E-Locker) replaces the standard open differential assembly within the axle, providing driver-selectable full differen...

Poly Bush Set A front and rear set of polyurethane suspension bushes that replace the original rubber bushes on the chassis and suspension. Polyure...

Rear Step Assembly – Retractable, a folding step mounted at the rear body to give a low-height step for access to the load area and roof. It compr...

Terrafirma medium load rear springs (pair) 90/D1/RRC

Towing Jaw rated to 3.5 tonnes, part of the towing/pintle hitch assembly. It provides the jaw coupling for trailer and recovery towing, mounting t...

Towing Bracket Slider is the sliding tongue section of a Dixon Bate adjustable towing bracket, which sets and locks the hitch at the required heigh...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Headlamp Light Guards for the Discovery 2 facelift, supplied as a matched pair covering both front headlamp positions. These black plastic guards ...

Roof Access Ladder provides access to the roof and roof rack. It mounts to the rear bodywork and gives a secure step up for loading, unloading and...

Tow Slider - Adjustable Saddle Type for the Dixon Bate adjustable tow bracket system. This is the vertically sliding saddle piece in the Dixon Bat...

Spare Wheel Cover - 235/70 R16 - vinyl cover for an externally mounted spare wheel, sized to a 235/70 R16 tyre. The cover pulls over the assembled...

Wind Deflectors - Set of 4 - Discovery 2

Receiver Hitch Pin - retaining pin for a 2in receiver hitch assembly. The receiver housing has a 2in internal bore that accepts a 2in square-secti...

Switch mounting bracket for a single differential lock switch, forming part of the electric locking differential control circuit. The bracket give...

Wading Kit for the axle and transmission breather circuit on V8 applications. The axle, gearbox and transfer casings vent to atmosphere through br...

Washer Bottle Guard - protective guard for the screen washer reservoir, fitted as part of a Terrafirma front winch bumper installation. With a win...

Combination Tow Ball and Jaw Unit - towing head assembly that bolts to the towing bracket, providing both a ball coupling and a jaw coupling from a...

Holder - Cup