Land Rover Discovery 2 Parts

Oil Cooler Pipe O-Ring for engine and transmission oil cooling circuits. This O-ring seals pipe fitting and hose connection joints in the oil cool...

Thermostat regulates coolant flow within the engine cooling system, with an opening temperature of 82°C. It remains closed while the engine is col...

Filler Plug sealing the fill and bleed point of the engine cooling system, fitted to the thermostat housing and the radiator. This brass plug clos...

Oil Cooler O-Ring for the 2.5L Td5 5-Cylinder Turbo Diesel engine. This O-ring seals the oil cooler assembly and oil filter housing to the cylinde...

Water Pump Gasket Seals the coolant pump to the engine within the cooling system of the Rover V8 petrol engine. It forms a coolant-tight joint bet...

Water Pump Seal - sealing ring for the coolant pump within the engine cooling circuit. It forms the coolant-tight joint between the pump and its m...

Water Pump from the engine cooling system of the Td5 2.5L 5-cylinder turbo diesel. It circulates coolant through the cylinder block and cylinder h...

Coolant - Blue RTU pre-mixed engine coolant and antifreeze for older Land Rover models. Ready to use straight from the container - no dilution req...

Coolant Hose - the top radiator hose in the Td5 2.5L 5-cylinder turbo diesel engine cooling system. This hose forms part of the upper coolant circ...

Oil cooler adapter gasket

Coolant Expansion Tank Cap rated at 1.4 bar, fitted to the expansion (header) tank of the engine cooling system. The cap seals the expansion tank ...

Flange Bolt is an M8 hexagon flange bolt with a 40 mm shank length. The integral flange beneath the head spreads clamping load over a wider bearin...

Coolant Hose connecting the heater circuit to the oil cooler on the Td5 2.5L five-cylinder turbo diesel. The hose carries engine coolant along the...

Coolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...

Water Pump from the engine cooling system of the Td5 2.5L 5-cylinder turbo diesel. It circulates coolant through the cylinder block and cylinder h...

tank expansion, WITHOUT CAP!

Water Pump for the Rover V8 EFI petrol engine, supplied with gasket. The water pump sits in the engine cooling circuit and is belt-driven from the...

Thermostat Gasket for the Td5 2.5L 5-cylinder turbo diesel engine, sealing the coolant outlet elbow to the thermostat housing. It forms the coolan...

Water Pump O-Ring Set provides the sealing rings for the coolant pump, sealing the pump to its mounting face and preventing coolant leakage at the ...

Jubilee Clip - 21-44mm is a worm-drive hose clip with a 21-44mm clamping range. The band is tightened by a captive worm screw to clamp small- to m...

Bleed Screw - Blue Anodised Aluminium for the coolant bleed point on Td5 engines. The screw seats in the bleed port on the top coolant hose and is...

Water Pump for the 200TDi 2.5L turbo diesel engine, operating in the engine cooling circuit. Belt-driven from the crankshaft, the pump circulates ...

Auxiliary Drive Belt for the front-end accessory drive system, transmitting drive from the crankshaft pulley to the alternator and other engine anc...

Radiator Mount is a moulded rubber isolator in the engine cooling system, forming part of the radiator mounting. It locates the radiator within it...

Throttle body heater assembly OEM

Oil Cooler Hose carries automatic transmission fluid between the gearbox and the transmission oil cooler, forming the left-hand line of the cooler ...

Filler Plug sealing the fill and bleed point of the engine cooling system, fitted to the thermostat housing and the radiator. This plastic plug cl...

Fan Bearing supports the engine cooling fan on the Td5 front cover. Mounted to the timing cover, the bearing carries the viscous cooling fan and i...

O-Ring seals the water rail (coolant rail) joint within the cooling system of the 4.0L and 4.6L V8 EFI petrol engine. Fitted at the water rail con...

Ignition heater plug timer glow plug relay

Bleed Screw for the coolant bleed point on Td5 engines. The screw seats in the bleed port on the top coolant hose and is opened to release trapped...

Coolant Hose - Radiator Bottom is the lower hose in the engine cooling circuit. It carries cooled coolant from the radiator bottom outlet back to ...

Cooling Fan Assembly drives airflow through the radiator within the engine cooling system, supplied complete with the fan drive. The integrated vi...

Fan Bearing supports the engine cooling fan on the Td5 front cover. Mounted to the timing cover, the bearing carries the viscous cooling fan and i...

Coolant Elbow forms part of the coolant outlet on the Td5 2.5L 5-cylinder turbo diesel engine. It directs coolant leaving the cylinder head water ...

Thermostat regulates coolant flow within the engine cooling system, with an opening temperature of 82°C. It remains closed while the engine is col...

Coolant Hose - Radiator Top is the upper hose in the engine cooling circuit on V8 petrol applications. It carries hot coolant from the engine outl...

Coolant Hose connects the coolant rail to the coolant pump, carrying coolant between the rail and the pump inlet within the cooling circuit. Fitte...

Coolant Hose - Radiator to Oil Cooler is a moulded coolant hose within the engine cooling circuit. It carries coolant between the radiator and the...

Radiator Assembly for the Td5 2.5L 5-cylinder turbo diesel engine cooling system. The radiator is the primary heat-exchanger in the coolant circui...

Oil Cooler - the replacement cooler element for the Td5 2.5L 5-cylinder turbo diesel engine oil cooling circuit. This is the finned heat-exchanger...

TD5 oil cooler adaptor gasket

Hose Clip - Jubilee - 70-92mm is a worm-drive band clamp with a clamping range of 70-92 mm. It secures a hose over its spigot or connector, compre...

Cooling Fan Assembly drives airflow through the radiator within the engine cooling system, supplied complete with the fan drive. The integrated vi...

Plenum to Water Jacket Gasket seals the joint between the plenum chamber and the water-jacketed intake manifold in the Rover V8 EFI induction syste...

Thermostat regulates coolant flow within the engine cooling system, with an opening temperature of 82°C. It remains closed while the engine is col...

Auxiliary Drive Belt for the front-end accessory drive system, transmitting drive from the crankshaft pulley to the alternator and other engine anc...

Coolant Hose connecting the thermostat housing to the coolant pipe on the Td5 2.5L 5-cylinder turbo diesel engine. Part of the engine cooling circ...