Land Rover Discovery 3 Parts

Eccentric Washer - an adjusting washer used at the front suspension arm pivot mounting. The offset (eccentric) hole allows the arm's pivot bolt po...

Anti Roll Bar Link - Rear connecting the rear anti-roll bar to the suspension trailing arm. This drop link bolts between the rear anti-roll bar an...

Ball Joint - Suspension Arm is the lower ball joint in the front suspension, fitted at the outer end of the lower wishbone and connecting it to the...

Hose Intercooler - TDV6

Pollen Filter for the cabin ventilation system, installed in the HVAC air intake housing. It traps pollen, dust and airborne particulates from the...

Brake Caliper Piston for the rear hydraulic disc brake assembly. The piston sits within the caliper bore and transfers hydraulic pressure from the...

Suspension Arm - front lower control arm (wishbone) for the right-hand side, fitted to models with air suspension. It connects the chassis to the l...

Exhaust Manifold Nut is an M8 flanged hex nut that secures the exhaust manifold and turbocharger mounting flanges to the cylinder head. The copper...

Transmission Sleeve for the ZF 6HP26 and 6HP28 six-speed automatic transmission. It is fitted within the main control valve body, where it forms th...

Fuel Filler Door Seal is the rubber seal fitted around the fuel filler door aperture in the rear body panel. It seals the recess behind the hinged...

Fuel Filler Door Latch secures the fuel tank filler flap in the closed position. The latch holds the filler door flush against the body and releas...

Camshaft Seal for the TDV6 2.7L V6 diesel engine. Seals the camshaft at its exit point from the cylinder head, preventing oil leakage from the cams...

EGR Outlet Pipe Gasket for the Exhaust Gas Recirculation system on the TDV6 2.7L diesel engine. This gasket seals the joint between the EGR outlet...

Washer used at front suspension arm pivot points, anti-roll bar stabilizer link connections, and front subframe cross-member fastening interfaces, ...

Starter Motor for the 4.4L AJ V8 petrol and 4.2L supercharged V8 petrol engines, part of the engine starting system. The starter mounts to the bel...

Kinetic Recovery Rope - vehicle recovery accessory for extracting a bogged or stuck vehicle. Unlike a static strap, a kinetic rope stretches under...

Central exhaust pipe Discovery 300TDI Stainless Steel

Trim Clip - retaining clip for interior trim panels. Secures interior trim components such as the instrument panel, glove box and speaker surround...

Towing Jaw rated to 3.5 tonnes, part of the towing/pintle hitch assembly. It provides the jaw coupling for trailer and recovery towing, mounting t...

Headlamp Washer Pump

Wiper Arm - Blade Assembly is the complete rear wiper arm and blade unit for the Discovery 3 and Discovery 4, fitted to the rear tailgate. The arm...

Rubber Floor Mat Set - Left-Hand Drive is a set of moulded rubber mats covering the front and rear footwells. Shaped to the contours of the left-h...

Upgrade your Discovery 3, Discovery 4, or Range Rover Sport with this high-quality 3-piece Silicone Intercooler Hose Kit. Specifically designed for...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Water Pump in the engine cooling circuit, for AJ-V8 4.4L and 4.2L Supercharged petrol engines. This pump circulates coolant through the engine blo...

Sump Gasket 2.7 - TDV6

Oil Temperature Sender located in the engine sump, for the 2.7L TDV6 and 3.6L TDV8 diesel engines. This sender monitors engine oil temperature and...

Exhaust Mounting - Rubber is a rubber isolator in the exhaust suspension system, fitted between the exhaust assembly and the vehicle underbody. Th...

Bar Anti Roll Bush

Door Handle Cover that caps the exterior door handle at the door lock control, finishing the handle assembly. Supplied in black, this is the blank...

Vent Panel Stud Bolt for the dashboard air vent panel assembly on Land Rover Defender without air conditioning. This stud bolt secures the dash ve...

Micro Relay is a 20 amp, 4-pin switching relay used within the vehicle electrical system to control a high-current circuit from a low-current signa...

Front Propshaft, connecting the transfer case front output flange to the front axle differential input pinion. The propshaft transmits torque to t...

Brake Caliper Piston for the front hydraulic disc brake assembly. The piston operates within the caliper bore and transmits hydraulic pressure fro...

Compressor Mounting Bracket - Air Suspension is the bracket that mounts the air suspension compressor to the vehicle. It locates and secures the c...

Axle Shaft - Front - LH

Parking Sensor is an ultrasonic sensor for the Park Distance Control (parking aid) system. Mounted in the bumper, it emits and receives ultrasonic...

Rear Ride Height Sensor (Right-Hand) is a rotary position sensor in the electronic air suspension system. Linked between the chassis and the rear ...

Rear LH height sensor

Parking Aid Sensor for the front bumper inner position, forming part of the Parking Distance Control (PDC) system. The sensor emits ultrasonic pul...

Gear Selector Linkage Bush in the floor gear-change assembly of the ZF 6HP26 / 6HP28 6-speed automatic transmission. The bush forms the pivot at t...

Halogen Bulb, H8 - 12V 35W single-filament halogen capsule for the exterior lighting system. The H8 uses the PGJ19-1 base and is the 35W member of...

Front Fog Lamp Bulb - H11 halogen capsule rated 12V 55W, operating in the exterior lighting system. The H11 uses the standardised PGJ19-2 base, wh...

Sump Screw for the ZF 6HP26 and 6HP28 six-speed automatic transmission. It retains the transmission sump pan against the gearbox casing, clamping ...

Spring Washer used in the floor-mounted gear change assembly of the ZF 6-speed automatic transmission. It is fitted under the fastener securing th...

Brake Light Switch - pedal-mounted stop lamp switch, located on the brake pedal box assembly. The switch mounts on the pedal bracket and is actuat...

Transmission oil drain plug for the ZF 6HP six-speed automatic gearbox, sealing the drain aperture in the transmission fluid pan. The plug is remo...

Exhaust System Bolt, M8 x 45 mm. Used at the catalytic converter flange joint, clamping the converter to its mating exhaust pipe section. Fastene...