for Discounts / VAT
for Discounts & Correct VAT
OEM, genuine, and aftermarket parts for the Land Rover Discovery Sport (L550), produced from 2014 to present. Covers pre-facelift D8-platform and post-facelift PTA-platform variants, including Ingenium diesel and petrol, Haldex AWD, and P300e PHEV builds. Over 100 parts in stock in the Netherlands with EU-wide delivery. For parts across all Discovery generations, see the Land Rover Discovery parts collection.
Lower Engine Mount (engine support insulator) securing the engine at its lower mounting point. It carries the lower engine load and damps engine v...
View full detailsFuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...
View full detailsExpansion Tank is the coolant expansion and overflow reservoir in the engine cooling system. It accommodates the thermal expansion of coolant, sep...
View full detailsOil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...
View full detailsService Kit - Major - OE Discovery 2 E1 F2 Petrol
Rear Wheel Arch Moulding - exterior body moulding that follows the line of the rear wheel arch, part of the exterior mouldings and cladding group. ...
View full detailsABS Sensor is a rear wheel speed sensor for the anti-lock braking system. Mounted at the rear hub, it measures wheel rotation speed and sends the ...
View full detailsOil Filter Adaptor for the 2.0L 16V TiVCT turbocharged Si4 petrol engine, part of the engine lubrication system. The adaptor mounts the oil filter...
View full detailsKit - Gear Shift Trigger
Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...
View full detailsAutomatic Transmission Fluid (ATF) for the automatic gearbox and power steering circuit. Specified as the transmission and power steering fluid to...
View full detailsFront Brake Pad Set for the front disc brake and caliper assembly, supplied as a front axle set. The pads sit in the front caliper carriers and ar...
View full detailsFuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...
View full detailsFront Wheel Arch Moulding for the left-hand side, part of the exterior body cladding assembly. The moulding follows the flange of the front wing w...
View full detailsIntercooler Outlet Tube carries cooled, pressurised charge air from the intercooler outlet toward the engine intake on 2.0L turbocharged petrol app...
View full detailsTurbocharger Hose connects the turbocharger outlet to the intercooler inlet within the charge-air system. It carries pressurised, heated charge ai...
View full detailsABS Sensor for the front axle, part of the anti-lock braking and stability control system. The wheel speed sensor reads the toothed reluctor ring ...
View full detailsFront Brake Pad Set - Less Springs - friction pads for the front disc brake assembly, mounted in the front caliper and clamping the front brake dis...
View full detailsWheel hub bearing for the front and rear knuckle and hub assemblies. The bearing carries vehicle load between the hub and the knuckle and allows t...
View full detailsFront Wheel Arch Moulding for the right-hand side, part of the exterior body cladding assembly. The moulding follows the flange of the front wing ...
View full detailsVariable Valve Timing Solenoid - Inlet for the 2.0L 16V TiVCT turbocharged petrol engine, controlling oil flow to the intake camshaft phaser. The ...
View full detailsWater Pump for the engine cooling circuit. The pump circulates coolant through the cylinder block, cylinder head and radiator to maintain engine op...
View full detailsLower Engine Mount (engine support insulator) securing the engine at its lower mounting point. It carries the lower engine load and damps engine v...
View full detailsEngine Knock Sensor for the 2.0L 16-valve turbocharged petrol engine, mounted on the cylinder block as part of the engine management system. The s...
View full detailsFront spring pad for the front suspension strut and coil spring assembly. The pad is an elastomer insulator that seats between the end of the coil...
View full detailsTrack Rod End is the ball-joint assembly at the outer end of the steering track rod, connecting the steering linkage to the front hub carrier. The...
View full detailsTrack Rod End is the ball-joint assembly at the outer end of the steering track rod, connecting the steering linkage to the front hub carrier. The...
View full detailsTrim Clip - a plastic push-fit retaining clip used to secure exterior trim and body mouldings to the vehicle. It locates in a pre-drilled panel hol...
View full detailsTrack Rod End is the ball-joint assembly at the outer end of the steering track rod, connecting the steering linkage to the front hub carrier. The...
View full detailsThermostat Housing Gasket for the 2.0L 16V TIVCT turbocharged petrol (GTDi) engine. It seals the thermostat housing against the engine within the c...
View full detailsPlastic Rivet is a push-fit fastener that secures front engine-compartment insulation panels to the body. It locates into a pre-formed panel hole t...
View full detailsPlastic Rivet is a push-fit fastener that secures front engine-compartment insulation panels to the body. It locates into a pre-formed panel hole t...
View full detailsWater Bypass Hose from the thermostat housing group of the engine cooling circuit, fitted to the 2.0L Ingenium four-cylinder petrol engine (AJ200 a...
View full detailsExhaust Manifold Gasket seals the joint between the turbocharger and the exhaust manifold, containing exhaust gas at the flanged connection. Fitte...
View full detailsExhaust Manifold Gasket seals the joint between the turbocharger/exhaust manifold and the cylinder head, containing exhaust gas at the port face. ...
View full detailsWindshield Washer Reservoir stores washer fluid for the windscreen and headlamp washing systems. It houses the washer pump(s) and supplies the win...
View full detailsTurbocharger Mounting Nut is a fastener used in the turbocharger mounting assembly, clamping the turbocharger against its gasketed joint at the fla...
View full detailsTurbocharger Mounting Nut is a fastener used in the turbocharger mounting assembly, clamping the turbocharger against its gasketed joint at the fla...
View full detailsValve Cover Gasket seals the joint between the camshaft cover and the cylinder head on the 2.0L 16V turbocharged petrol engine. It forms the oil-t...
View full detailsExhaust Gas Pressure Sensor for the diesel particulate filter, in the exhaust aftertreatment sensing group. Connected by pressure pipes across the...
View full detailsOil - Differential
Oil Filler Cap seals the engine oil filler opening on the camshaft cover of the 2.0L 16V turbocharged petrol engine. It closes the point where eng...
View full detailsTiming Chain Tensioner Pin is the locking pin for the timing chain tensioner on the 2.0L 16V turbocharged petrol engine. It locks the chain tensio...
View full detailsSpeaker Grille for a headlining-mounted speaker. This is the finishing grille that covers a roof speaker set into the headlining, concealing the s...
View full detailsTurbocharger Water Inlet Gasket seals the coolant inlet connection at the turbocharger. It fits between the coolant feed union and the turbocharger...
View full detailsTurbocharger Water Inlet Gasket seals the coolant inlet connection at the turbocharger. It fits between the coolant feed union and the turbocharger...
View full detailsTurbocharger Oil Feed Filter is a small in-line filter located in the turbocharger oil feed pipe. It traps particulate debris carried in the pressu...
View full detailsTurbocharger Oil Feed Filter is a small in-line filter located in the turbocharger oil feed pipe. It traps particulate debris carried in the pressu...
View full detailsParts for the compact Land Rover Discovery Sport (L550), built from 2014 to present. JLR D8 pre-facelift and PTA post-facelift phases covered, Ingenium and Ford-era engines, Haldex and Active Driveline AWD, P300e PHEV. Same-day EU dispatch from the Netherlands.
The Discovery Sport (L550) is the compact crossover in the Land Rover range. It launched in late 2014 as the replacement for the Freelander 2 (L359) and is engineered as a five-door unibody crossover, not a body-on-frame SUV. Its closest mechanical relative is the Range Rover Evoque, with which it shares platforms across both production phases. The Discovery Sport is a separate vehicle from the full-size Discovery 5 (L462): different platform, different engine layout, different drivetrain, no parts interchangeability.
All Discovery Sport variants use transversely-mounted engines and lack a low-range transfer case. Most variants carry either Haldex Generation 5 on-demand AWD or the GKN Active Driveline system, with selected diesel variants in some markets fitted as front-wheel drive only. The 9-speed ZF 9HP automatic was standard on pre-facelift cars (a 6-speed Getrag manual was available on some lower diesels), and an 8-speed Aisin automatic is fitted to the P300e plug-in hybrid.
Built on the JLR D8 platform, also referenced in JLR documentation as LR-MS, shared with the first-generation Range Rover Evoque (L538). The 2015 model year launched with Ford-sourced engines: the 2.0-litre EcoBoost petrol and the 2.2-litre Duratorq diesel. From the 2016 model year onward these were replaced by the JLR Ingenium AJ200 family in 2.0-litre four-cylinder petrol and diesel forms.
Moved to the Premium Transverse Architecture (PTA) platform shared with the Jaguar E-Pace and the second-generation Range Rover Evoque (L551). PTA brought 48-volt mild-hybrid hardware to the Ingenium diesel and petrol engines, enabled the P300e plug-in hybrid (1.5-litre three-cylinder petrol plus an 80 kW motor and an 8-speed Aisin transmission), and updated the exterior styling, lighting, track width, and infotainment.
Across the 2019 boundary, body trim and many fasteners carry over. Engine, drivetrain, and emissions hardware do not. Each product listing names the applicable year range or variant where fitment is restricted.
Use the engine variant, year, and category filters above the product grid to narrow this collection to parts that match your specific Discovery Sport.
The Discovery Sport carries four practical fitment-relevant divisions: pre-facelift versus post-facelift (2019 boundary), engine family (Ford-sourced 2015 only, Ingenium thereafter, plus the P300e three-cylinder PHEV from 2020), drivetrain configuration (FWD eD4 in some markets, Haldex AWD as standard, GKN Active Driveline as option, PHEV AWD on the P300e), and transmission (9-speed ZF, 6-speed Getrag manual on some diesels, 8-speed Aisin on the P300e). All of these need to be confirmed before ordering drivetrain or powertrain parts.
The 17-digit VIN on the windscreen base plate or driver-side door jamb is the most reliable starting point. The 10th character identifies model year. The 2015 model year (10th character F) is a critical boundary because that vehicle alone uses Ford engines rather than Ingenium. Drivetrain configuration is not encoded in any single VIN character but can be confirmed from the V5C or the original build sheet, and visually from under-vehicle inspection of the rear differential and propshaft fitment.
Land Rover publishes official Discovery Sport specifications and model year guidance at landrover.com/discovery/discovery-sport. For engine code identification and the Ford-to-Ingenium transition detail, the Land Rover Discovery Sport Workshop Manual lists the applicable component codes by model year.
Discovery Sport stock covers conventional suspension and steering (no air suspension is fitted to this model), braking, engine and ancillaries for the Ingenium and Ford-era engines, cooling for both engine families, Haldex and Active Driveline driveline service parts, electrical and sensor service items, and routine service kits. Click any category to filter results to L550 fitment.
Coil springs, dampers, control arms, bushings, and steering parts for the L550. No air suspension is fitted to this model.
Suspension and steering partsDiscs, pads, calipers, and hydraulic parts for the Discovery Sport across both production phases.
Brake system partsService parts for the Ingenium 2.0-litre diesel and petrol, the Ford EcoBoost and Duratorq engines on 2015 model year vehicles, and the 1.5-litre three-cylinder petrol on the P300e.
Engine partsThermostats, water pumps, radiators, expansion tanks, and coolant hoses for transversely-mounted Ingenium and Ford-era engines.
Cooling and heating partsRear propshaft, Haldex Generation 5 service parts, GKN Active Driveline components, CV joints, and driveshaft items.
Drive mechanism partsSensors, switches, lighting, and electrical service parts for the L550 across pre and post-facelift specifications.
Electrical partsOil, fuel, air, and pollen filter combinations matched to engine and model year for scheduled servicing.
Service kitsThe Discovery Sport sits across two engine families and two platforms within a single nameplate, so the tier decision matters most on engine and drivetrain parts where pre-facelift Ford-era and Ingenium components are not interchangeable.
Genuine is the appropriate tier for the Haldex coupling internals, the Active Driveline rear drive module, the 9HP transmission rebuild components, the P300e plug-in hybrid battery and motor service parts, and emissions hardware on the Ingenium diesel. These are systems where calibration history and JLR part numbers matter for warning code suppression and warranty integrity.
OEM is the practical default for most service work. ZF supplies the 9HP transmission and fluid (specifically the ZF Lifeguard 9). Bosch supplies most ignition, sensor, and diesel injection hardware on the Ingenium. GKN supplies the Active Driveline rear drive components. Magna BorgWarner supplies the Haldex couplings. Brembo and TRW supply braking. The OEM tier matches Genuine specification at lower cost.
Aftermarket covers wear-driven and consumable parts: brake friction surfaces, filters, bushings, bulbs, fasteners, and body trim clips. Listings name the supplier where the OEM identity is confirmed, so the source is explicit before purchase.
EU Stock and DispatchL550 parts ship from the Netherlands warehouse. Working-day orders placed before 15:00 CET are dispatched the same day. Intra-EU shipments are duty-free with no import VAT at the border, with typical transit of 1 to 2 working days to Benelux, Germany, and France, and 2 to 4 days to the Nordics, Iberia, Italy, and central Europe. UK customers are served under standard post-Brexit customs procedures. Regular workshop customers can request invoiced trade terms.
Technical GuidesThe guides below cover the diagnostic and service questions that come up most often on the L550.
A direct cost-of-ownership comparison between the body-on-frame Discovery 4 (L319) and the compact Discovery Sport (L550) for European owners. Covers maintenance spend, common fault patterns, and the practical differences that matter when choosing or running either model.
Discovery 4 vs Discovery Sport guideA diagnostic procedure for the 2.0-litre Ingenium diesel as fitted to the Discovery Sport. Covers the failure modes upstream of thermostat or water pump replacement so the correct component gets ordered first time.
Overheating diagnosis guideA fuel system diagnostic guide for Ingenium diesel-equipped vehicles including the Discovery Sport. Covers the most likely causes of a crank-no-start condition and identifies which fuel system components to inspect before ordering.
Crank no start diagnosis guideNo, and this is the most common point of confusion when ordering parts. The Discovery Sport (L550) is a compact crossover SUV built on a transverse-engine platform (JLR D8 from launch, PTA from the 2019 facelift), shared most closely with the Range Rover Evoque. It has no low-range transfer case and uses either Haldex or GKN Active Driveline AWD. The Discovery 5 (L462) is a full-size, longitudinal-engine SUV on the JLR D7u aluminium platform, sharing structure with the Range Rover L405 and Range Rover Sport L494. It has permanent four-wheel drive with a two-speed transfer case and low range. The two vehicles share neither platform nor major mechanical components, and parts are not interchangeable. Make sure you are on the correct collection page before ordering.
Close. The Discovery Sport shares its platform with the Range Rover Evoque across both production phases. Pre-facelift Discovery Sport (2014 to 2019) is on the JLR D8 platform shared with the first-generation Evoque (L538, 2011 to 2018). Post-facelift Discovery Sport (2019 onward) moved to the Premium Transverse Architecture shared with the second-generation Evoque (L551, 2018 onward) and the Jaguar E-Pace. This means many platform-level components, suspension geometry, drivetrain hardware, and engine mounts are common between Discovery Sport and Evoque of the corresponding generation. Body panels, interior trim, and exterior styling are model-specific.
The Discovery Sport launched in late 2014 (2015 model year) using engines carried over from the Freelander 2 era: the 2.0-litre EcoBoost petrol and the 2.2-litre Duratorq turbodiesel, both sourced from Ford. The JLR Ingenium engine family entered Discovery Sport production from the 2016 model year onward, replacing the Ford units with the 2.0-litre AJ200 four-cylinder diesel and petrol engines. The 2015 model year is therefore the only Discovery Sport that runs Ford engines, and its engine, fuel system, and emissions parts are completely separate from all later model years. Confirm the engine code via VIN before ordering anything in those categories.
The Discovery Sport uses transverse-engine on-demand AWD, either the Haldex Generation 5 coupling (standard) or the GKN Active Driveline system (optional). Both systems engage the rear axle electronically when needed, neither includes a low-range transfer case, and neither has a centre differential in the conventional sense. Some pre-facelift diesel variants were sold as front-wheel-drive only (the eD4) in selected markets. By contrast, the Discovery 5 uses permanent four-wheel drive with a longitudinal layout, a Torsen centre differential, and a two-speed transfer case with low range. Drivetrain parts between the two models are completely separate.
Yes. The P300e variant is supported across service categories: the 1.5-litre Ingenium three-cylinder petrol engine, the 8-speed Aisin automatic transmission, the high-voltage cooling system, and the standard service items shared with the rest of the L550 range. High-voltage battery service parts and electric motor components are stocked at Genuine and OEM tiers where available. Working on a PHEV requires high-voltage qualification, and a qualified workshop should always isolate the system before any high-voltage work. Standard chassis, brake, and body service parts on the P300e are the same as the mild-hybrid Discovery Sport of the same year.
For in-stock items, the typical timeline is same-day dispatch on orders confirmed before 15:00 CET, with delivery in 1 to 2 working days to Benelux, Germany, and northern France, and 2 to 4 days to the wider EU. Carrier tracking is issued at dispatch. For workshops handling regular L550 volume, the trade account route gives invoiced terms, faster checkout, and a single point of contact for backorder queries.