for Discounts / VAT
for Discounts & Correct VAT
OEM, genuine, and aftermarket parts for the Land Rover Discovery Sport (L550), produced from 2014 to present. Covers pre-facelift D8-platform and post-facelift PTA-platform variants, including Ingenium diesel and petrol, Haldex AWD, and P300e PHEV builds. Over 100 parts in stock in the Netherlands with EU-wide delivery. For parts across all Discovery generations, see the Land Rover Discovery parts collection.
Ignition Coil
sensor exhaust gas 2.2L CR DI 16V Diesel OEM Autotec
Gasket cylinder head Grade 3, 3 Hole, 1.22 MM Multi layered steel Reinz
Throttle body with integrated actuator motor for the 2.2L DW12 common-rail diesel engine. Mounted in the intake tract ahead of the inlet manifold,...
View full detailsBattery - 12V lead-acid battery of flooded, non-spillable construction, for the vehicle low-voltage electrical supply. Non-spillable construction ...
View full detailsTiming Chain Kit for the valve timing drive of the Ingenium 2.0L 4-cylinder diesel engine (AJ200 series). The timing chain drive synchronises cran...
View full detailsWheel Bearing Circlip - 51 mm retaining ring for the wheel hub bearing. Seats in the groove of the knuckle bore and locates the hub bearing axiall...
View full detailsSuspension Arm - Front - RH is a front control arm fitted to the right-hand side of the front suspension assembly. It locates the front wheel hub ...
View full detailsRear Brake Disc - 325 mm solid disc for the rear axle service brake assembly, supplied as an axle pair. Each disc locates on the rear wheel hub fl...
View full detailsRear Brake Disc - 300 mm solid disc for the rear axle service brake assembly, supplied as an axle pair. Each disc locates on the rear wheel hub fl...
View full detailsFront brake disc, 349mm diameter, internally vented, forming part of the front brake disc and caliper assembly. Mounted to the front hub, the disc...
View full detailsHub Bearing
Air Conditioning Compressor
Clutch Repair Kit for the 6-speed manual (M66) transmission on 2.2L diesel applications. The clutch transmits drive from the engine flywheel to th...
View full detailsInlet Manifold Gasket Kit - gasket set for the inlet (intake) manifold of the 2.2L TD4 diesel engine. Renews the sealing between the inlet manifol...
View full detailsIridium Spark Plug for the 2.0L 16V turbocharged petrol engine. The iridium centre electrode withstands the high cylinder temperatures and pressure...
View full detailsPollen Filter for the cabin air intake, part of the HVAC ventilation system. It installs in the intake housing upstream of the blower motor and eva...
View full detailsExhaust Manifold Gasket seals the exhaust manifold to the cylinder head on the 2.0L 16V petrol engine. Fitted between the head's exhaust ports and...
View full detailsVacuum Pump Seal - the sealing ring for the engine-mounted vacuum pump. The vacuum pump generates the vacuum used by the brake servo; this seal cl...
View full detailsValve Cover Gasket seals the cylinder head cover (rocker cover) to the cylinder head on the 2.0L 16V petrol engine. It forms the oil-tight joint a...
View full details2.2L diesel 16V
NOx Trap Temperature Sensor is an exhaust gas temperature sensor within the diesel exhaust aftertreatment system, mounted in the exhaust stream at ...
View full detailsHub Nut - M24 x 2.0 for wheel hub and bearing retention. This M24 x 2.0 metric hub nut secures the wheel hub or halfshaft flange onto the stub axl...
View full detailsTransfer Case Support bracket that carries the intermediate bearing of the front axle drive shaft where the shaft runs from the transfer case. It ...
View full detailsBearing Holder - front bearing housing within the Front Axle Drive Shaft assembly. The holder carries and retains the front support bearing of the...
View full detailsClutch Cover Bolt secures the clutch cover (pressure plate) to the flywheel within the clutch assembly. Threaded M8 x 13mm, fitted on the 6-speed ...
View full detailsOil Filter filters the engine oil on the 2.0L 16V turbocharged petrol engine. Part of the oil cooler and filter assembly, it removes contaminants ...
View full detailsFuel Filter for the diesel fuel supply system. This primary filter removes contaminants and water from the fuel before it reaches the high-pressure...
View full detailsBolt - 1/2" x 4" for use in Land Rover chassis, body, and mechanical assemblies where a 1/2" thread and 4" length is specified. This bolt meets th...
View full detailsTurbocharger - exhaust gas driven turbocharger for the 2.0L I4 Ingenium diesel engine, forming the boost stage of the air induction and exhaust sys...
View full detailsCamshaft Cover Gasket Set
torx screw and washer, M6x18mm OEM
Wheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...
View full detailsLocking Wheel Nut Kit for alloy wheels. The locking wheel nuts replace standard wheel nuts to provide theft resistance for the road wheels; each n...
View full detailsIntercooler Hose forms part of the charge-air ducting on the 2.2L TD4 single-turbo diesel engine. It carries pressurised charge air through the in...
View full detailsStarter Motor for the engine starting system of the 2.0L four-cylinder AJ200 engine, in both petrol and diesel applications. When the key or butto...
View full detailsSynthetic Winch Rope - 10mm x 24m - 10,000 lbs for 4x4 winch recovery. This synthetic fibre winch rope is rated to 10,000 lbs (approx. 4,536 kg) b...
View full detailsTiming belt kit with water pump OEM
EGR Valve - High Pressure for the 2.0L AJ200 Diesel exhaust gas recirculation system. This valve controls exhaust gas flow through the high-pressu...
View full detailsPortable Jump Starter and Air Compressor - a handheld 12V power pack combining a battery jump starter, power bank, tyre inflator and LED work light...
View full detailsHeater Hose
Haldex Fluid is the specific oil for the Haldex all-wheel-drive coupling, supplied in a 300 ml bottle. The Haldex coupling sits ahead of the rear ...
View full detailsSensor exhaust gas oxygen
O-Ring and Grease Kit for servicing the transfer box input shaft. Contains the input shaft O-ring and the anti-seize grease used when resealing th...
View full detailsThis Filter Service Kit is designed for the 2.2 Diesel engine in Discovery Sport and Range Rover Evoque models equipped with a Diesel Particulate F...
View full detailsScrew and Captive Washer - a screw with a retained washer for mounting front-end body panels. Used to secure the dash panel, front fender, radiato...
View full detailsDrive Belt for the ancillary drive on the 2.0L 16V TiVCT turbocharged Petrol. This belt drives the engine-mounted accessories from the crankshaft ...
View full detailsBrake Disc for the rear-axle disc brake, 300 mm diameter. The disc rotates with the wheel hub and provides the friction surface that the brake pad...
View full detailsParts for the compact Land Rover Discovery Sport (L550), built from 2014 to present. JLR D8 pre-facelift and PTA post-facelift phases covered, Ingenium and Ford-era engines, Haldex and Active Driveline AWD, P300e PHEV. Same-day EU dispatch from the Netherlands.
The Discovery Sport (L550) is the compact crossover in the Land Rover range. It launched in late 2014 as the replacement for the Freelander 2 (L359) and is engineered as a five-door unibody crossover, not a body-on-frame SUV. Its closest mechanical relative is the Range Rover Evoque, with which it shares platforms across both production phases. The Discovery Sport is a separate vehicle from the full-size Discovery 5 (L462): different platform, different engine layout, different drivetrain, no parts interchangeability.
All Discovery Sport variants use transversely-mounted engines and lack a low-range transfer case. Most variants carry either Haldex Generation 5 on-demand AWD or the GKN Active Driveline system, with selected diesel variants in some markets fitted as front-wheel drive only. The 9-speed ZF 9HP automatic was standard on pre-facelift cars (a 6-speed Getrag manual was available on some lower diesels), and an 8-speed Aisin automatic is fitted to the P300e plug-in hybrid.
Built on the JLR D8 platform, also referenced in JLR documentation as LR-MS, shared with the first-generation Range Rover Evoque (L538). The 2015 model year launched with Ford-sourced engines: the 2.0-litre EcoBoost petrol and the 2.2-litre Duratorq diesel. From the 2016 model year onward these were replaced by the JLR Ingenium AJ200 family in 2.0-litre four-cylinder petrol and diesel forms.
Moved to the Premium Transverse Architecture (PTA) platform shared with the Jaguar E-Pace and the second-generation Range Rover Evoque (L551). PTA brought 48-volt mild-hybrid hardware to the Ingenium diesel and petrol engines, enabled the P300e plug-in hybrid (1.5-litre three-cylinder petrol plus an 80 kW motor and an 8-speed Aisin transmission), and updated the exterior styling, lighting, track width, and infotainment.
Across the 2019 boundary, body trim and many fasteners carry over. Engine, drivetrain, and emissions hardware do not. Each product listing names the applicable year range or variant where fitment is restricted.
Use the engine variant, year, and category filters above the product grid to narrow this collection to parts that match your specific Discovery Sport.
The Discovery Sport carries four practical fitment-relevant divisions: pre-facelift versus post-facelift (2019 boundary), engine family (Ford-sourced 2015 only, Ingenium thereafter, plus the P300e three-cylinder PHEV from 2020), drivetrain configuration (FWD eD4 in some markets, Haldex AWD as standard, GKN Active Driveline as option, PHEV AWD on the P300e), and transmission (9-speed ZF, 6-speed Getrag manual on some diesels, 8-speed Aisin on the P300e). All of these need to be confirmed before ordering drivetrain or powertrain parts.
The 17-digit VIN on the windscreen base plate or driver-side door jamb is the most reliable starting point. The 10th character identifies model year. The 2015 model year (10th character F) is a critical boundary because that vehicle alone uses Ford engines rather than Ingenium. Drivetrain configuration is not encoded in any single VIN character but can be confirmed from the V5C or the original build sheet, and visually from under-vehicle inspection of the rear differential and propshaft fitment.
Land Rover publishes official Discovery Sport specifications and model year guidance at landrover.com/discovery/discovery-sport. For engine code identification and the Ford-to-Ingenium transition detail, the Land Rover Discovery Sport Workshop Manual lists the applicable component codes by model year.
Discovery Sport stock covers conventional suspension and steering (no air suspension is fitted to this model), braking, engine and ancillaries for the Ingenium and Ford-era engines, cooling for both engine families, Haldex and Active Driveline driveline service parts, electrical and sensor service items, and routine service kits. Click any category to filter results to L550 fitment.
Coil springs, dampers, control arms, bushings, and steering parts for the L550. No air suspension is fitted to this model.
Suspension and steering partsDiscs, pads, calipers, and hydraulic parts for the Discovery Sport across both production phases.
Brake system partsService parts for the Ingenium 2.0-litre diesel and petrol, the Ford EcoBoost and Duratorq engines on 2015 model year vehicles, and the 1.5-litre three-cylinder petrol on the P300e.
Engine partsThermostats, water pumps, radiators, expansion tanks, and coolant hoses for transversely-mounted Ingenium and Ford-era engines.
Cooling and heating partsRear propshaft, Haldex Generation 5 service parts, GKN Active Driveline components, CV joints, and driveshaft items.
Drive mechanism partsSensors, switches, lighting, and electrical service parts for the L550 across pre and post-facelift specifications.
Electrical partsOil, fuel, air, and pollen filter combinations matched to engine and model year for scheduled servicing.
Service kitsThe Discovery Sport sits across two engine families and two platforms within a single nameplate, so the tier decision matters most on engine and drivetrain parts where pre-facelift Ford-era and Ingenium components are not interchangeable.
Genuine is the appropriate tier for the Haldex coupling internals, the Active Driveline rear drive module, the 9HP transmission rebuild components, the P300e plug-in hybrid battery and motor service parts, and emissions hardware on the Ingenium diesel. These are systems where calibration history and JLR part numbers matter for warning code suppression and warranty integrity.
OEM is the practical default for most service work. ZF supplies the 9HP transmission and fluid (specifically the ZF Lifeguard 9). Bosch supplies most ignition, sensor, and diesel injection hardware on the Ingenium. GKN supplies the Active Driveline rear drive components. Magna BorgWarner supplies the Haldex couplings. Brembo and TRW supply braking. The OEM tier matches Genuine specification at lower cost.
Aftermarket covers wear-driven and consumable parts: brake friction surfaces, filters, bushings, bulbs, fasteners, and body trim clips. Listings name the supplier where the OEM identity is confirmed, so the source is explicit before purchase.
EU Stock and DispatchL550 parts ship from the Netherlands warehouse. Working-day orders placed before 15:00 CET are dispatched the same day. Intra-EU shipments are duty-free with no import VAT at the border, with typical transit of 1 to 2 working days to Benelux, Germany, and France, and 2 to 4 days to the Nordics, Iberia, Italy, and central Europe. UK customers are served under standard post-Brexit customs procedures. Regular workshop customers can request invoiced trade terms.
Technical GuidesThe guides below cover the diagnostic and service questions that come up most often on the L550.
A direct cost-of-ownership comparison between the body-on-frame Discovery 4 (L319) and the compact Discovery Sport (L550) for European owners. Covers maintenance spend, common fault patterns, and the practical differences that matter when choosing or running either model.
Discovery 4 vs Discovery Sport guideA diagnostic procedure for the 2.0-litre Ingenium diesel as fitted to the Discovery Sport. Covers the failure modes upstream of thermostat or water pump replacement so the correct component gets ordered first time.
Overheating diagnosis guideA fuel system diagnostic guide for Ingenium diesel-equipped vehicles including the Discovery Sport. Covers the most likely causes of a crank-no-start condition and identifies which fuel system components to inspect before ordering.
Crank no start diagnosis guideNo, and this is the most common point of confusion when ordering parts. The Discovery Sport (L550) is a compact crossover SUV built on a transverse-engine platform (JLR D8 from launch, PTA from the 2019 facelift), shared most closely with the Range Rover Evoque. It has no low-range transfer case and uses either Haldex or GKN Active Driveline AWD. The Discovery 5 (L462) is a full-size, longitudinal-engine SUV on the JLR D7u aluminium platform, sharing structure with the Range Rover L405 and Range Rover Sport L494. It has permanent four-wheel drive with a two-speed transfer case and low range. The two vehicles share neither platform nor major mechanical components, and parts are not interchangeable. Make sure you are on the correct collection page before ordering.
Close. The Discovery Sport shares its platform with the Range Rover Evoque across both production phases. Pre-facelift Discovery Sport (2014 to 2019) is on the JLR D8 platform shared with the first-generation Evoque (L538, 2011 to 2018). Post-facelift Discovery Sport (2019 onward) moved to the Premium Transverse Architecture shared with the second-generation Evoque (L551, 2018 onward) and the Jaguar E-Pace. This means many platform-level components, suspension geometry, drivetrain hardware, and engine mounts are common between Discovery Sport and Evoque of the corresponding generation. Body panels, interior trim, and exterior styling are model-specific.
The Discovery Sport launched in late 2014 (2015 model year) using engines carried over from the Freelander 2 era: the 2.0-litre EcoBoost petrol and the 2.2-litre Duratorq turbodiesel, both sourced from Ford. The JLR Ingenium engine family entered Discovery Sport production from the 2016 model year onward, replacing the Ford units with the 2.0-litre AJ200 four-cylinder diesel and petrol engines. The 2015 model year is therefore the only Discovery Sport that runs Ford engines, and its engine, fuel system, and emissions parts are completely separate from all later model years. Confirm the engine code via VIN before ordering anything in those categories.
The Discovery Sport uses transverse-engine on-demand AWD, either the Haldex Generation 5 coupling (standard) or the GKN Active Driveline system (optional). Both systems engage the rear axle electronically when needed, neither includes a low-range transfer case, and neither has a centre differential in the conventional sense. Some pre-facelift diesel variants were sold as front-wheel-drive only (the eD4) in selected markets. By contrast, the Discovery 5 uses permanent four-wheel drive with a longitudinal layout, a Torsen centre differential, and a two-speed transfer case with low range. Drivetrain parts between the two models are completely separate.
Yes. The P300e variant is supported across service categories: the 1.5-litre Ingenium three-cylinder petrol engine, the 8-speed Aisin automatic transmission, the high-voltage cooling system, and the standard service items shared with the rest of the L550 range. High-voltage battery service parts and electric motor components are stocked at Genuine and OEM tiers where available. Working on a PHEV requires high-voltage qualification, and a qualified workshop should always isolate the system before any high-voltage work. Standard chassis, brake, and body service parts on the P300e are the same as the mild-hybrid Discovery Sport of the same year.
For in-stock items, the typical timeline is same-day dispatch on orders confirmed before 15:00 CET, with delivery in 1 to 2 working days to Benelux, Germany, and northern France, and 2 to 4 days to the wider EU. Carrier tracking is issued at dispatch. For workshops handling regular L550 volume, the trade account route gives invoiced terms, faster checkout, and a single point of contact for backorder queries.