for Discounts / VAT
for Discounts & Correct VAT
OEM, genuine, and aftermarket parts for the Land Rover Discovery Sport (L550), produced from 2014 to present. Covers pre-facelift D8-platform and post-facelift PTA-platform variants, including Ingenium diesel and petrol, Haldex AWD, and P300e PHEV builds. Over 100 parts in stock in the Netherlands with EU-wide delivery. For parts across all Discovery generations, see the Land Rover Discovery parts collection.
DEF Injector Refit Kit
Relay - 20 A five-pin micro relay, black housing. A five-pin relay is a changeover type: a low-current control circuit energises the coil, which s...
View full detailsVariable Timing Solenoid - camshaft timing oil control valve in the variable valve timing system of the Ingenium engine range. The solenoid is an ...
View full detailsShock Absorber Bracket - mounting bracket within the rear springs and shock absorber assembly. The bracket forms the anchorage between the rear sh...
View full detailsPCV Valve Service Kit for the crankcase ventilation circuit of the 2.0L Ingenium petrol engine (AJ200 / AJ20P4). The positive crankcase ventilatio...
View full detailsRear Crankshaft Oil Seal - the main oil seal at the flywheel end of the crankshaft, part of the crankshaft sealing arrangement on the Ingenium engi...
View full detailsIridium Spark Plug for the 2.0L 16V TIVCT turbocharged petrol engine (Si4, 240PS). The plug threads into the cylinder head and fires beneath its c...
View full detailsTrim Clip for the tailgate (back door) interior trim panel. The clip seats in the trim panel and pushes into a corresponding aperture in the tailg...
View full detailsPCV Valve Service Kit for the crankcase ventilation circuit of the 2.0L Ingenium petrol engine (AJ200 / AJ20P4). The positive crankcase ventilatio...
View full detailsBall Stud - Tailgate Strut - the ball pivot that a tailgate (luggage compartment door) gas strut socket clips onto. It threads into the body apert...
View full detailsLimited Slip Rear Axle Oil, supplied in a 1 litre container. A hypoid gear oil for rear drive units fitted with a limited-slip differential. The a...
View full detailsCowl Moulding Clip - retaining clip securing the front cowl (leaf screen) moulding to the body structure. The clip holds the plenum trim panel dow...
View full detailsFront Crankshaft Oil Seal for the Ingenium engine family, sealing the crankshaft nose where it passes through the front cover. The seal runs on th...
View full detailsAccessory Drive Belt for the front end accessory drive of the 2.0L Ingenium four-cylinder engine (AJ200 / AJ20P4, petrol and diesel applications). ...
View full detailsBearing Retainer - front bearing retainer within the Front Axle Drive Shaft assembly. The retainer secures and locates the front support bearing o...
View full detailsFuel Filter for the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). The filter removes contaminants and water from the diesel fuel supply ...
View full detailsRear Brake Pad Kit - friction pads for the rear disc brake assembly. The pads locate in the rear caliper and clamp the rear brake disc to generate ...
View full detailsRide Height Sensor - Rear is the rotary position sensor of the electronically controlled suspension system. The sensor body is fixed to the vehicl...
View full detailsTurbocharger Heat Shield - thermal shield fitted over the turbocharger on the 2.0L AJ20P4 Ingenium petrol engine. The shield covers the turbine ho...
View full detailsFront Brake Hose - the flexible hydraulic hose in the front brake circuit, connecting the rigid brake pipe on the body to the caliper at the hub. ...
View full detailsAccessory Drive Belt for the front end accessory drive of the 2.0L Ingenium four-cylinder engine (AJ200 / AJ20P4, petrol and diesel applications). ...
View full detailsRear Brake Pad Kit - the friction pads that sit in the rear brake caliper and clamp the rear brake disc, forming the wear interface of the rear dis...
View full detailsAnti-Roll Bar Link - Front, the connecting link between the front anti-roll bar end and the suspension strut in the front suspension assembly. The...
View full detailsAccessory Drive Belt for the front end accessory drive of the 2.0L Ingenium four-cylinder engine (AJ200 / AJ20P4, petrol and diesel applications). ...
View full detailsFront Brake Pad Wear Sensor for the front axle brake assembly, part of the brake pad wear warning circuit. The sensor consists of a wire loop seat...
View full detailsRear Crankshaft Oil Seal and Retainer forms the oil-tight closure at the flywheel end of the cylinder block, within the Cylinder Block and Cranksha...
View full detailsFront Brake Pad Wear Sensor Wire from the front brake pad wear warning circuit. The sensor wire is routed into a slot in the front brake pad frict...
View full detailsInlet valve stem seal for the cylinder head valve train. The seal is pressed onto the inlet valve guide boss and wipes the valve stem as it recipr...
View full detailsCoolant Hose - Overflow Container - moulded hose in the engine cooling system connecting to the coolant overflow container (expansion tank). It ca...
View full detailsAir Filter - engine air cleaner element, seated in the intake air cleaner housing upstream of the mass air flow sensor and the turbocharger inlet. ...
View full detailsBrake Pad Set for the rear axle, part of the rear brake discs and calipers assembly. The pads are the friction elements of the rear disc brake cir...
View full detailsTiming Gear Special Nut from the front timing gear assembly, securing the lower primary timing chain guide. The nut locates and clamps the guide a...
View full detailsFront Brake Pad Wear Sensor for the front axle brake assembly, forming part of the brake pad wear warning circuit. The sensor is a wire loop carri...
View full detailsBrake Pads - Rear - With Springs - friction pads for the rear axle, supplied as a complete axle set (one set per axle). The pads locate in the rea...
View full detailsTiming Cover Blanking Plug - threaded plug that closes an aperture in the front timing cover of the 2.0L Ingenium petrol engine (AJ200 / AJ20P4, al...
View full detailsHypoid Differential Oil - SAE 75W-90 gear oil for final drive differentials and other hypoid gear applications. Formulated for the high sliding co...
View full detailsRear Crankshaft Oil Seal and Retainer forms the oil-tight closure at the flywheel end of the cylinder block, within the Cylinder Block and Cranksha...
View full detailsO-Ring - VVT Solenoid Cover, 47 mm, sealing the variable valve timing solenoid cover to the cylinder head on Ingenium engines - 2.0L AJ20P and AJ20...
View full detailsToe Link Bush for the rear multi-link suspension assembly. Carries the pivot at the toe link, the transverse arm that sets and holds rear wheel to...
View full detailsCoolant Temperature Sensor mounted in the cylinder head coolant gallery, part of the engine cooling and engine management system. The sensor is a ...
View full detailsCrankshaft Main Bearing for the 2.0L Ingenium four-cylinder diesel engine (AJ200D / AJ20D4). The main bearing provides the plain bearing surface b...
View full detailsCable Connector - an electrical connector used in the vehicle wiring harness. The connector forms the termination between a harness cable and its ...
View full detailsFront Brake Sensor Wiring Bracket - mounting bracket for the brake pad wear sensor lead at the front disc brake and caliper assembly. The bracket ...
View full detailsBearing Circlip is the retaining ring used in the front and rear wheel hub and bearing assembly. It seats in the machined groove of the hub carrie...
View full detailsCabin Pollen Filter, 272x195x43mm - the filter element in the HVAC intake housing, installed upstream of the blower motor and evaporator. All air ...
View full detailsCoolant Bypass Tube - a rigid coolant transfer pipe in the cooling circuit of the 2.0L AJ20P4 four-cylinder petrol engine. The tube carries coolan...
View full detailsDoor Handle Gasket - sealing gasket for the exterior door handle and lock assembly, part of the door closures group. It sits between the handle es...
View full detailsInlet valve stem seal for the cylinder head valve train. The seal is pressed onto the inlet valve guide boss and wipes the valve stem as it recipr...
View full detailsParts for the compact Land Rover Discovery Sport (L550), built from 2014 to present. JLR D8 pre-facelift and PTA post-facelift phases covered, Ingenium and Ford-era engines, Haldex and Active Driveline AWD, P300e PHEV. Same-day EU dispatch from the Netherlands.
The Discovery Sport (L550) is the compact crossover in the Land Rover range. It launched in late 2014 as the replacement for the Freelander 2 (L359) and is engineered as a five-door unibody crossover, not a body-on-frame SUV. Its closest mechanical relative is the Range Rover Evoque, with which it shares platforms across both production phases. The Discovery Sport is a separate vehicle from the full-size Discovery 5 (L462): different platform, different engine layout, different drivetrain, no parts interchangeability.
All Discovery Sport variants use transversely-mounted engines and lack a low-range transfer case. Most variants carry either Haldex Generation 5 on-demand AWD or the GKN Active Driveline system, with selected diesel variants in some markets fitted as front-wheel drive only. The 9-speed ZF 9HP automatic was standard on pre-facelift cars (a 6-speed Getrag manual was available on some lower diesels), and an 8-speed Aisin automatic is fitted to the P300e plug-in hybrid.
Built on the JLR D8 platform, also referenced in JLR documentation as LR-MS, shared with the first-generation Range Rover Evoque (L538). The 2015 model year launched with Ford-sourced engines: the 2.0-litre EcoBoost petrol and the 2.2-litre Duratorq diesel. From the 2016 model year onward these were replaced by the JLR Ingenium AJ200 family in 2.0-litre four-cylinder petrol and diesel forms.
Moved to the Premium Transverse Architecture (PTA) platform shared with the Jaguar E-Pace and the second-generation Range Rover Evoque (L551). PTA brought 48-volt mild-hybrid hardware to the Ingenium diesel and petrol engines, enabled the P300e plug-in hybrid (1.5-litre three-cylinder petrol plus an 80 kW motor and an 8-speed Aisin transmission), and updated the exterior styling, lighting, track width, and infotainment.
Across the 2019 boundary, body trim and many fasteners carry over. Engine, drivetrain, and emissions hardware do not. Each product listing names the applicable year range or variant where fitment is restricted.
Use the engine variant, year, and category filters above the product grid to narrow this collection to parts that match your specific Discovery Sport.
The Discovery Sport carries four practical fitment-relevant divisions: pre-facelift versus post-facelift (2019 boundary), engine family (Ford-sourced 2015 only, Ingenium thereafter, plus the P300e three-cylinder PHEV from 2020), drivetrain configuration (FWD eD4 in some markets, Haldex AWD as standard, GKN Active Driveline as option, PHEV AWD on the P300e), and transmission (9-speed ZF, 6-speed Getrag manual on some diesels, 8-speed Aisin on the P300e). All of these need to be confirmed before ordering drivetrain or powertrain parts.
The 17-digit VIN on the windscreen base plate or driver-side door jamb is the most reliable starting point. The 10th character identifies model year. The 2015 model year (10th character F) is a critical boundary because that vehicle alone uses Ford engines rather than Ingenium. Drivetrain configuration is not encoded in any single VIN character but can be confirmed from the V5C or the original build sheet, and visually from under-vehicle inspection of the rear differential and propshaft fitment.
Land Rover publishes official Discovery Sport specifications and model year guidance at landrover.com/discovery/discovery-sport. For engine code identification and the Ford-to-Ingenium transition detail, the Land Rover Discovery Sport Workshop Manual lists the applicable component codes by model year.
Discovery Sport stock covers conventional suspension and steering (no air suspension is fitted to this model), braking, engine and ancillaries for the Ingenium and Ford-era engines, cooling for both engine families, Haldex and Active Driveline driveline service parts, electrical and sensor service items, and routine service kits. Click any category to filter results to L550 fitment.
Coil springs, dampers, control arms, bushings, and steering parts for the L550. No air suspension is fitted to this model.
Suspension and steering partsDiscs, pads, calipers, and hydraulic parts for the Discovery Sport across both production phases.
Brake system partsService parts for the Ingenium 2.0-litre diesel and petrol, the Ford EcoBoost and Duratorq engines on 2015 model year vehicles, and the 1.5-litre three-cylinder petrol on the P300e.
Engine partsThermostats, water pumps, radiators, expansion tanks, and coolant hoses for transversely-mounted Ingenium and Ford-era engines.
Cooling and heating partsRear propshaft, Haldex Generation 5 service parts, GKN Active Driveline components, CV joints, and driveshaft items.
Drive mechanism partsSensors, switches, lighting, and electrical service parts for the L550 across pre and post-facelift specifications.
Electrical partsOil, fuel, air, and pollen filter combinations matched to engine and model year for scheduled servicing.
Service kitsThe Discovery Sport sits across two engine families and two platforms within a single nameplate, so the tier decision matters most on engine and drivetrain parts where pre-facelift Ford-era and Ingenium components are not interchangeable.
Genuine is the appropriate tier for the Haldex coupling internals, the Active Driveline rear drive module, the 9HP transmission rebuild components, the P300e plug-in hybrid battery and motor service parts, and emissions hardware on the Ingenium diesel. These are systems where calibration history and JLR part numbers matter for warning code suppression and warranty integrity.
OEM is the practical default for most service work. ZF supplies the 9HP transmission and fluid (specifically the ZF Lifeguard 9). Bosch supplies most ignition, sensor, and diesel injection hardware on the Ingenium. GKN supplies the Active Driveline rear drive components. Magna BorgWarner supplies the Haldex couplings. Brembo and TRW supply braking. The OEM tier matches Genuine specification at lower cost.
Aftermarket covers wear-driven and consumable parts: brake friction surfaces, filters, bushings, bulbs, fasteners, and body trim clips. Listings name the supplier where the OEM identity is confirmed, so the source is explicit before purchase.
EU Stock and DispatchL550 parts ship from the Netherlands warehouse. Working-day orders placed before 15:00 CET are dispatched the same day. Intra-EU shipments are duty-free with no import VAT at the border, with typical transit of 1 to 2 working days to Benelux, Germany, and France, and 2 to 4 days to the Nordics, Iberia, Italy, and central Europe. UK customers are served under standard post-Brexit customs procedures. Regular workshop customers can request invoiced trade terms.
Technical GuidesThe guides below cover the diagnostic and service questions that come up most often on the L550.
A direct cost-of-ownership comparison between the body-on-frame Discovery 4 (L319) and the compact Discovery Sport (L550) for European owners. Covers maintenance spend, common fault patterns, and the practical differences that matter when choosing or running either model.
Discovery 4 vs Discovery Sport guideA diagnostic procedure for the 2.0-litre Ingenium diesel as fitted to the Discovery Sport. Covers the failure modes upstream of thermostat or water pump replacement so the correct component gets ordered first time.
Overheating diagnosis guideA fuel system diagnostic guide for Ingenium diesel-equipped vehicles including the Discovery Sport. Covers the most likely causes of a crank-no-start condition and identifies which fuel system components to inspect before ordering.
Crank no start diagnosis guideNo, and this is the most common point of confusion when ordering parts. The Discovery Sport (L550) is a compact crossover SUV built on a transverse-engine platform (JLR D8 from launch, PTA from the 2019 facelift), shared most closely with the Range Rover Evoque. It has no low-range transfer case and uses either Haldex or GKN Active Driveline AWD. The Discovery 5 (L462) is a full-size, longitudinal-engine SUV on the JLR D7u aluminium platform, sharing structure with the Range Rover L405 and Range Rover Sport L494. It has permanent four-wheel drive with a two-speed transfer case and low range. The two vehicles share neither platform nor major mechanical components, and parts are not interchangeable. Make sure you are on the correct collection page before ordering.
Close. The Discovery Sport shares its platform with the Range Rover Evoque across both production phases. Pre-facelift Discovery Sport (2014 to 2019) is on the JLR D8 platform shared with the first-generation Evoque (L538, 2011 to 2018). Post-facelift Discovery Sport (2019 onward) moved to the Premium Transverse Architecture shared with the second-generation Evoque (L551, 2018 onward) and the Jaguar E-Pace. This means many platform-level components, suspension geometry, drivetrain hardware, and engine mounts are common between Discovery Sport and Evoque of the corresponding generation. Body panels, interior trim, and exterior styling are model-specific.
The Discovery Sport launched in late 2014 (2015 model year) using engines carried over from the Freelander 2 era: the 2.0-litre EcoBoost petrol and the 2.2-litre Duratorq turbodiesel, both sourced from Ford. The JLR Ingenium engine family entered Discovery Sport production from the 2016 model year onward, replacing the Ford units with the 2.0-litre AJ200 four-cylinder diesel and petrol engines. The 2015 model year is therefore the only Discovery Sport that runs Ford engines, and its engine, fuel system, and emissions parts are completely separate from all later model years. Confirm the engine code via VIN before ordering anything in those categories.
The Discovery Sport uses transverse-engine on-demand AWD, either the Haldex Generation 5 coupling (standard) or the GKN Active Driveline system (optional). Both systems engage the rear axle electronically when needed, neither includes a low-range transfer case, and neither has a centre differential in the conventional sense. Some pre-facelift diesel variants were sold as front-wheel-drive only (the eD4) in selected markets. By contrast, the Discovery 5 uses permanent four-wheel drive with a longitudinal layout, a Torsen centre differential, and a two-speed transfer case with low range. Drivetrain parts between the two models are completely separate.
Yes. The P300e variant is supported across service categories: the 1.5-litre Ingenium three-cylinder petrol engine, the 8-speed Aisin automatic transmission, the high-voltage cooling system, and the standard service items shared with the rest of the L550 range. High-voltage battery service parts and electric motor components are stocked at Genuine and OEM tiers where available. Working on a PHEV requires high-voltage qualification, and a qualified workshop should always isolate the system before any high-voltage work. Standard chassis, brake, and body service parts on the P300e are the same as the mild-hybrid Discovery Sport of the same year.
For in-stock items, the typical timeline is same-day dispatch on orders confirmed before 15:00 CET, with delivery in 1 to 2 working days to Benelux, Germany, and northern France, and 2 to 4 days to the wider EU. Carrier tracking is issued at dispatch. For workshops handling regular L550 volume, the trade account route gives invoiced terms, faster checkout, and a single point of contact for backorder queries.