for Discounts / VAT
for Discounts & Correct VAT
OEM, genuine, and aftermarket parts for the Land Rover Discovery Sport (L550), produced from 2014 to present. Covers pre-facelift D8-platform and post-facelift PTA-platform variants, including Ingenium diesel and petrol, Haldex AWD, and P300e PHEV builds. Over 100 parts in stock in the Netherlands with EU-wide delivery. For parts across all Discovery generations, see the Land Rover Discovery parts collection.
Crankshaft Gear forms part of the timing gear train, mounted on the crankshaft nose to drive the timing system and maintain synchronisation between...
View full detailsBlade Fuse - 5A is a 5-amp plug-in automotive blade fuse used in the vehicle fuse and relay boxes to protect an electrical circuit. It seats in a ...
View full detailsFuse is a plug-in automotive blade fuse used in the vehicle fuse and relay boxes to protect an electrical circuit. It seats in a standard fuse hol...
View full detailsAdhesive and Sealer is a glass bonding adhesive and sealer used to seat and seal fixed automotive glazing to the body. It bonds and seals the wind...
View full detailsHeater Hose carries engine coolant to the heater matrix, within the heater coolant circuit. It routes hot coolant between the engine and the heate...
View full detailsBypass Tube carries engine coolant on the bypass path, within the thermostat and housing assembly of the cooling circuit. It routes coolant around...
View full detailsFiller Plug closes the lubricant aperture on the axle case, within the front and rear axle and differential assembly. It seals the oil fill and le...
View full detailsAir Hose routes air within the turbocharger intake system, forming part of the charge-air ducting. It carries air along the turbocharger air path,...
View full detailsTurbocharger Air Hose for the 2.0L 16-valve turbocharged petrol engine. It carries charge air within the turbocharger induction circuit, connecting...
View full detailsTurbocharger Oil Return Hose carries lubricating oil from the turbocharger back to the engine, within the turbocharger oiling circuit. It returns ...
View full detailsTurbocharger Oil Return Hose carries lubricating oil from the turbocharger back to the engine, within the turbocharger oiling circuit. It returns ...
View full detailsCylinder Head Bolt clamps the cylinder head to the engine block, within the cylinder head assembly. It holds the head against the block and head g...
View full detailsIntake Manifold Gasket seals the joint between the intake manifold and the cylinder head, within the air intake assembly. It maintains an airtight...
View full detailsIntake Manifold Gasket seals the joint between the intake manifold and the cylinder head, within the air intake assembly. It maintains an airtight...
View full detailsO-Ring for the oil filter and cooler assembly. It seals a connection within the oil cooler and filter assembly, maintaining oil-tight integrity at...
View full detailsTemperature Sensor monitors engine coolant temperature from its mounting in the cylinder block, within the Cylinder Block and Plugs assembly. The ...
View full detailsSeal for the oil filter to oil cooler connection, part of the oil cooler and filter assembly. This O-ring seals the joint between the oil filter h...
View full detailsO-Ring seals the joint between the oil filter housing and the oil cooler on the 2.0L Ingenium engine. Fitted at the oil filter-to-cooler connectio...
View full detailsInlet Valve is a poppet valve in the cylinder head of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). Seated in the intake port, it op...
View full detailsSealing Ring sealing a joint within the engine timing gear covers. This O-ring seals a connection at the timing cover assembly, maintaining oil-ti...
View full detailsUpper Timing Cover Gasket seals the upper timing chain cover to the cylinder head on the 2.0L Ingenium diesel engine (AJ200D / AJ20D4). It forms t...
View full detailsCamshaft Cover Gasket sealing the camshaft cover to the cylinder head. It seals the joint between the camshaft (cylinder head) cover and the cylin...
View full detailsSealing Ring sealing a joint within the engine timing gear covers. This O-ring seals a connection at the timing cover assembly, maintaining oil-ti...
View full detailsCover Gasket for the upper timing chain cover. It seals the joint between the upper timing chain cover and the engine, maintaining an oil-tight se...
View full detailsCamshaft Cover Gasket sealing the camshaft cover to the cylinder head. It seals the joint between the camshaft (cylinder head) cover and the cylin...
View full detailsExhaust Valve is a poppet valve in the cylinder head of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). Seated in the exhaust port, it...
View full detailsValve Stem Seal for the cylinder head valvetrain. It seals around the valve stem where it passes through the valve guide, controlling oil entry in...
View full detailsTiming Chain Guide for the engine timing gear. It supports and locates the timing chain along its run, controlling the chain path and reducing vib...
View full detailsTiming Chain Guide for the engine timing gear. It supports and locates the timing chain along its run, controlling the chain path and reducing vib...
View full detailsTiming Chain Tensioner Arm for the engine timing gear. It bears against the timing chain and transmits the tensioner load to take up slack and mai...
View full detailsValve Rocker Arm for the cylinder head valvetrain. It transfers camshaft lift to the valve, actuating the valve as the camshaft rotates. Fitted to...
View full detailsValve Stem Seal seals the valve stem where it passes through the valve guide in the cylinder head of Ingenium diesel engines. Fitted over the top ...
View full detailsValve Rocker Arm for the cylinder head valvetrain. It transfers camshaft lift to the valve, actuating the valve as the camshaft rotates. Fitted to...
View full detailsSpecial Bolt for the engine timing gear assembly. It secures a component within the timing gear drive. Fitted to 2.0-litre diesel Ingenium engines...
View full detailsTurbo Gasket sealing the joint between the exhaust manifold and the turbocharger. The same gasket seals both the exhaust manifold and the turbocha...
View full detailsIdler Pulley for the accessory drive belt system, 65 mm in diameter. It guides the accessory (auxiliary) drive belt across its run, maintaining be...
View full detailsExhaust Manifold Gasket sealing the exhaust manifold and turbocharger joint. The same gasket serves both the exhaust manifold and the turbocharger...
View full detailsWater Outlet Tube forming the coolant outlet connection at the cylinder head, part of the engine cooling circuit. It carries coolant from the cyli...
View full detailsO-Ring for the turbocharger of the 2.0L I4 diesel (AJ200) engine, sealing the upper turbocharger-to-pipe joint (14.3 x 2.4 mm). The O-ring seals t...
View full detailsO-Ring sealing a turbocharger oil and coolant connection within the turbocharger lubrication and cooling circuit. It seals the union at the turboc...
View full detailsO-Ring sealing a turbocharger oil and coolant connection within the turbocharger lubrication and cooling circuit. It seals the union at the turboc...
View full detailsO-Ring sealing a turbocharger oil and coolant connection within the turbocharger lubrication and cooling circuit. It seals the union at the turboc...
View full detailsOil Drain Plug for the engine oil pan (sump). Threaded into the base of the oil pan, it seals the oil drain point and is removed to drain the engi...
View full detailsCopper Sealing Washer for the turbocharger oil feed on the 2.0L Ingenium (AJ200) engine. The washer seals the banjo union on the turbocharger oil ...
View full detailsCylinder Head Bolt with hex head, for the 2.0L I4 diesel (AJ200) engine. The bolt secures the cylinder head to the engine block, providing the cla...
View full detailsCylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 4 (1.6 mm). ...
View full detailsExhaust Manifold Gasket that seals the joint between the cylinder head and the exhaust manifold. The gasket maintains a gas-tight seal at the mani...
View full detailsShock Absorber Boot for the suspension damper assembly. The boot sheaths the exposed damper piston rod, shielding it from grit, moisture and road ...
View full detailsParts for the compact Land Rover Discovery Sport (L550), built from 2014 to present. JLR D8 pre-facelift and PTA post-facelift phases covered, Ingenium and Ford-era engines, Haldex and Active Driveline AWD, P300e PHEV. Same-day EU dispatch from the Netherlands.
The Discovery Sport (L550) is the compact crossover in the Land Rover range. It launched in late 2014 as the replacement for the Freelander 2 (L359) and is engineered as a five-door unibody crossover, not a body-on-frame SUV. Its closest mechanical relative is the Range Rover Evoque, with which it shares platforms across both production phases. The Discovery Sport is a separate vehicle from the full-size Discovery 5 (L462): different platform, different engine layout, different drivetrain, no parts interchangeability.
All Discovery Sport variants use transversely-mounted engines and lack a low-range transfer case. Most variants carry either Haldex Generation 5 on-demand AWD or the GKN Active Driveline system, with selected diesel variants in some markets fitted as front-wheel drive only. The 9-speed ZF 9HP automatic was standard on pre-facelift cars (a 6-speed Getrag manual was available on some lower diesels), and an 8-speed Aisin automatic is fitted to the P300e plug-in hybrid.
Built on the JLR D8 platform, also referenced in JLR documentation as LR-MS, shared with the first-generation Range Rover Evoque (L538). The 2015 model year launched with Ford-sourced engines: the 2.0-litre EcoBoost petrol and the 2.2-litre Duratorq diesel. From the 2016 model year onward these were replaced by the JLR Ingenium AJ200 family in 2.0-litre four-cylinder petrol and diesel forms.
Moved to the Premium Transverse Architecture (PTA) platform shared with the Jaguar E-Pace and the second-generation Range Rover Evoque (L551). PTA brought 48-volt mild-hybrid hardware to the Ingenium diesel and petrol engines, enabled the P300e plug-in hybrid (1.5-litre three-cylinder petrol plus an 80 kW motor and an 8-speed Aisin transmission), and updated the exterior styling, lighting, track width, and infotainment.
Across the 2019 boundary, body trim and many fasteners carry over. Engine, drivetrain, and emissions hardware do not. Each product listing names the applicable year range or variant where fitment is restricted.
Use the engine variant, year, and category filters above the product grid to narrow this collection to parts that match your specific Discovery Sport.
The Discovery Sport carries four practical fitment-relevant divisions: pre-facelift versus post-facelift (2019 boundary), engine family (Ford-sourced 2015 only, Ingenium thereafter, plus the P300e three-cylinder PHEV from 2020), drivetrain configuration (FWD eD4 in some markets, Haldex AWD as standard, GKN Active Driveline as option, PHEV AWD on the P300e), and transmission (9-speed ZF, 6-speed Getrag manual on some diesels, 8-speed Aisin on the P300e). All of these need to be confirmed before ordering drivetrain or powertrain parts.
The 17-digit VIN on the windscreen base plate or driver-side door jamb is the most reliable starting point. The 10th character identifies model year. The 2015 model year (10th character F) is a critical boundary because that vehicle alone uses Ford engines rather than Ingenium. Drivetrain configuration is not encoded in any single VIN character but can be confirmed from the V5C or the original build sheet, and visually from under-vehicle inspection of the rear differential and propshaft fitment.
Land Rover publishes official Discovery Sport specifications and model year guidance at landrover.com/discovery/discovery-sport. For engine code identification and the Ford-to-Ingenium transition detail, the Land Rover Discovery Sport Workshop Manual lists the applicable component codes by model year.
Discovery Sport stock covers conventional suspension and steering (no air suspension is fitted to this model), braking, engine and ancillaries for the Ingenium and Ford-era engines, cooling for both engine families, Haldex and Active Driveline driveline service parts, electrical and sensor service items, and routine service kits. Click any category to filter results to L550 fitment.
Coil springs, dampers, control arms, bushings, and steering parts for the L550. No air suspension is fitted to this model.
Suspension and steering partsDiscs, pads, calipers, and hydraulic parts for the Discovery Sport across both production phases.
Brake system partsService parts for the Ingenium 2.0-litre diesel and petrol, the Ford EcoBoost and Duratorq engines on 2015 model year vehicles, and the 1.5-litre three-cylinder petrol on the P300e.
Engine partsThermostats, water pumps, radiators, expansion tanks, and coolant hoses for transversely-mounted Ingenium and Ford-era engines.
Cooling and heating partsRear propshaft, Haldex Generation 5 service parts, GKN Active Driveline components, CV joints, and driveshaft items.
Drive mechanism partsSensors, switches, lighting, and electrical service parts for the L550 across pre and post-facelift specifications.
Electrical partsOil, fuel, air, and pollen filter combinations matched to engine and model year for scheduled servicing.
Service kitsThe Discovery Sport sits across two engine families and two platforms within a single nameplate, so the tier decision matters most on engine and drivetrain parts where pre-facelift Ford-era and Ingenium components are not interchangeable.
Genuine is the appropriate tier for the Haldex coupling internals, the Active Driveline rear drive module, the 9HP transmission rebuild components, the P300e plug-in hybrid battery and motor service parts, and emissions hardware on the Ingenium diesel. These are systems where calibration history and JLR part numbers matter for warning code suppression and warranty integrity.
OEM is the practical default for most service work. ZF supplies the 9HP transmission and fluid (specifically the ZF Lifeguard 9). Bosch supplies most ignition, sensor, and diesel injection hardware on the Ingenium. GKN supplies the Active Driveline rear drive components. Magna BorgWarner supplies the Haldex couplings. Brembo and TRW supply braking. The OEM tier matches Genuine specification at lower cost.
Aftermarket covers wear-driven and consumable parts: brake friction surfaces, filters, bushings, bulbs, fasteners, and body trim clips. Listings name the supplier where the OEM identity is confirmed, so the source is explicit before purchase.
EU Stock and DispatchL550 parts ship from the Netherlands warehouse. Working-day orders placed before 15:00 CET are dispatched the same day. Intra-EU shipments are duty-free with no import VAT at the border, with typical transit of 1 to 2 working days to Benelux, Germany, and France, and 2 to 4 days to the Nordics, Iberia, Italy, and central Europe. UK customers are served under standard post-Brexit customs procedures. Regular workshop customers can request invoiced trade terms.
Technical GuidesThe guides below cover the diagnostic and service questions that come up most often on the L550.
A direct cost-of-ownership comparison between the body-on-frame Discovery 4 (L319) and the compact Discovery Sport (L550) for European owners. Covers maintenance spend, common fault patterns, and the practical differences that matter when choosing or running either model.
Discovery 4 vs Discovery Sport guideA diagnostic procedure for the 2.0-litre Ingenium diesel as fitted to the Discovery Sport. Covers the failure modes upstream of thermostat or water pump replacement so the correct component gets ordered first time.
Overheating diagnosis guideA fuel system diagnostic guide for Ingenium diesel-equipped vehicles including the Discovery Sport. Covers the most likely causes of a crank-no-start condition and identifies which fuel system components to inspect before ordering.
Crank no start diagnosis guideNo, and this is the most common point of confusion when ordering parts. The Discovery Sport (L550) is a compact crossover SUV built on a transverse-engine platform (JLR D8 from launch, PTA from the 2019 facelift), shared most closely with the Range Rover Evoque. It has no low-range transfer case and uses either Haldex or GKN Active Driveline AWD. The Discovery 5 (L462) is a full-size, longitudinal-engine SUV on the JLR D7u aluminium platform, sharing structure with the Range Rover L405 and Range Rover Sport L494. It has permanent four-wheel drive with a two-speed transfer case and low range. The two vehicles share neither platform nor major mechanical components, and parts are not interchangeable. Make sure you are on the correct collection page before ordering.
Close. The Discovery Sport shares its platform with the Range Rover Evoque across both production phases. Pre-facelift Discovery Sport (2014 to 2019) is on the JLR D8 platform shared with the first-generation Evoque (L538, 2011 to 2018). Post-facelift Discovery Sport (2019 onward) moved to the Premium Transverse Architecture shared with the second-generation Evoque (L551, 2018 onward) and the Jaguar E-Pace. This means many platform-level components, suspension geometry, drivetrain hardware, and engine mounts are common between Discovery Sport and Evoque of the corresponding generation. Body panels, interior trim, and exterior styling are model-specific.
The Discovery Sport launched in late 2014 (2015 model year) using engines carried over from the Freelander 2 era: the 2.0-litre EcoBoost petrol and the 2.2-litre Duratorq turbodiesel, both sourced from Ford. The JLR Ingenium engine family entered Discovery Sport production from the 2016 model year onward, replacing the Ford units with the 2.0-litre AJ200 four-cylinder diesel and petrol engines. The 2015 model year is therefore the only Discovery Sport that runs Ford engines, and its engine, fuel system, and emissions parts are completely separate from all later model years. Confirm the engine code via VIN before ordering anything in those categories.
The Discovery Sport uses transverse-engine on-demand AWD, either the Haldex Generation 5 coupling (standard) or the GKN Active Driveline system (optional). Both systems engage the rear axle electronically when needed, neither includes a low-range transfer case, and neither has a centre differential in the conventional sense. Some pre-facelift diesel variants were sold as front-wheel-drive only (the eD4) in selected markets. By contrast, the Discovery 5 uses permanent four-wheel drive with a longitudinal layout, a Torsen centre differential, and a two-speed transfer case with low range. Drivetrain parts between the two models are completely separate.
Yes. The P300e variant is supported across service categories: the 1.5-litre Ingenium three-cylinder petrol engine, the 8-speed Aisin automatic transmission, the high-voltage cooling system, and the standard service items shared with the rest of the L550 range. High-voltage battery service parts and electric motor components are stocked at Genuine and OEM tiers where available. Working on a PHEV requires high-voltage qualification, and a qualified workshop should always isolate the system before any high-voltage work. Standard chassis, brake, and body service parts on the P300e are the same as the mild-hybrid Discovery Sport of the same year.
For in-stock items, the typical timeline is same-day dispatch on orders confirmed before 15:00 CET, with delivery in 1 to 2 working days to Benelux, Germany, and northern France, and 2 to 4 days to the wider EU. Carrier tracking is issued at dispatch. For workshops handling regular L550 volume, the trade account route gives invoiced terms, faster checkout, and a single point of contact for backorder queries.