Genuine Land Rover Parts

Camshaft Sprocket Washer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It fits at the camshaft sprocket within the timing...

Exhaust Pipe Gasket for the front exhaust section of the 2.0L turbocharged petrol engine. Seals the flanged front pipe to catalyst joint, providin...

Oil Drain Plug for the 2.0L 16V petrol engine. It seals the drain point in the oil pan (sump) and is removed to drain the engine oil at a service.

Timing Gear Bolt for the 2.0L 16V petrol engine. It secures a gear on the engine's timing drive.

Valve Spring Retainer for the 2.0L 16-valve turbocharged petrol engine, fitted in the cylinder head valve train. The retainer caps the top of the ...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Accessory Drive Pulley Bolt for the 2.0L 16-valve turbocharged petrol engine, used in the accessory drive belt system. The bolt secures the access...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Timing Chain Guide for the 2.0L 16-valve turbocharged petrol engine, fitted in the timing gear assembly at the front of the engine. The guide loca...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Engine Mounting supports the engine on the subframe and damps vibration transmitted into the body. Fitted to the 2.0L 16V TiVCT turbocharged petro...

Shock Absorber Top Mount for the front strut assembly. The top mount secures the upper end of the front strut to the vehicle body, isolating suspe...

Automatic Transmission Fluid (ATF) for the automatic gearbox and power steering circuit. Specified as the transmission and power steering fluid to...

EGR Cooler Gasket for the 2.2L diesel engine, part of the exhaust gas recirculation (EGR) system. Seals the joint between the exhaust manifold and...

Rocker Cover for the 2.2L DW12 diesel engine, sealing the top of the cylinder head over the camshafts and valvetrain. Also referred to as the cams...

Mass Air Flow Sensor measures the mass of air drawn into the engine and reports it to the engine control module for fuel metering. It mounts in th...

Axle Oil 75W-90 is a hypoid gear oil for the front and rear differentials and final drive units. The 75W-90 grade lubricates the crown wheel and p...

Breather Valve for the axle case or manual transmission housing. The valve vents the housing to atmosphere, allowing internal air pressure to equa...

Heater Hose for the engine cooling and cabin heating circuit. This hose carries heated engine coolant between the engine and the heater matrix, wh...

Retaining Clip is a fastening clip used in the radiator grille and front bumper assembly. It secures the grille and front bumper trim components t...

Exterior mirror motor - left-hand side glass adjustment motor within the door mirror head. The motor sits behind the mirror glass and drives the g...

Fuel Filler Restrictor for diesel vehicles, fitted inside the fuel filler neck as part of the fuel tank and filler assembly. It forms a physical b...

Trim clip used to retain trim panels to the body structure. Size 8.5 mm, with a panel grip range of 0.8 to 2.2 mm. The clip locates through the pa...

Throttle Body and Motor - the electronically actuated intake throttle valve for the 2.2L common-rail direct-injection diesel engine, mounted at the...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Bumper Retainer Nut - a push-in retaining nut used in the front bumper, radiator grille and rear bumper assemblies. The retainer clips into a pres...

Bolt for the exhaust system front section. This fastener secures the flanged joint between the exhaust manifold and the front pipe section, holdin...

Fuel Tank Vent Reservoir for the evaporative emission control (EVAP) system on petrol models. It collects and stores fuel vapour drawn from the fue...

Driveshaft Retainer Circlip locks the inner end of the front driveshaft into the differential inside the front axle case. The clip springs into a ...

Axle Case Seal - Front seals the front axle case (final drive housing) around the driveshaft where it passes through the case. It retains the diff...

Driveshaft Oil Seal - Inner - Front LH is fitted to the front axle case (final drive housing) and seals around the inner end of the left-hand front...

Driveshaft Oil Seal - Inner - Front RH is fitted to the front axle case (final drive housing) and seals around the inner end of the right-hand fron...

Bolt and Washer is a hex-head bolt with washer for the cylinder block. Used at the cylinder block and its plugs on the 2.2L diesel engine.

Washer Bottle Filler Cap - the filler cap for the windscreen washer fluid reservoir. It closes the reservoir filler neck, sealing the washer fluid...

Brake Disc & Caliper Bolt - a fixing bolt for the brake disc and caliper assembly. It is used at both the front and rear brake disc and calipe...

Sealing Ring - the right-hand outer seal for the front axle case, part of the front driveline. It seals the point where the front driveshaft passe...

Air Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...