Genuine Land Rover Parts

Parking Brake Shoe Fitting Kit for the drum-in-hat parking brake housed within the rear brake discs. The kit supplies the retaining pins and clips...

Brake Booster Repair Kit covering the vacuum servo unit that sits between the brake pedal pushrod and the master cylinder in the hydraulic braking ...

Disc - Brake - Vented

Circlip for the lower steering knuckle bush. This circlip retains the bush within the lower steering knuckle, forming part of the front axle and s...

Flanged Nut M16 flanged nut for the rear suspension arm fixings. Part of the rear multi-link suspension assembly, it secures the lower and upper s...

Nut - an M8 x 1.25 captive U-spring nut used to mount the air suspension compressor. The spring-steel body clips over the chassis bracket to provi...

Adjusting Nut is an M17 flanged nut used in the rear suspension toe link assembly. It locks the toe link adjuster at its connection to the rear kn...

Special Nut - secures the rear knuckle to the lower and upper suspension arms. It retains the rear suspension arm bolts at the knuckle, holding th...

Bolt for the rear suspension assembly. This fastener is used in the rear cross member and stabilizer bar assembly, and in the rear knuckle and low...

Bolt Mounting bolt for the front suspension arm. Part of the front suspension assembly, it secures a front upper or lower control arm (wishbone) a...

Bolt Mounting bolt for the rear suspension arm. Part of the rear multi-link suspension assembly, it secures a rear upper or lower suspension arm a...

Eccentric Washer - an adjusting washer used at the front suspension arm pivot mounting. The offset (eccentric) hole allows the arm's pivot bolt po...

Plug for the hydraulic valve block of the Active Anti-Roll Bar system with Roll Stability Control. The valve block contains the solenoid and relie...

Anti-Roll Bar Bush for the front suspension, locating the front anti-roll (stabiliser) bar to the body. The bush clamps around the bar and allows ...

Anti-Roll Bar Bush - a mounting bush in the rear suspension anti-roll (stabiliser) bar assembly. It clamps the rear anti-roll bar to the body, loc...

Transfer Relief Valve - Front Axle in the electronic air suspension system. Fitted in the front axle branch of the air suspension pneumatic circui...

Air Suspension Transfer Relief Valve - solenoid valve in the air suspension compressor and supply circuit, mounted at the supply reservoir. Contro...

ACE Pipe - Rear carries hydraulic fluid within the Active Cornering Enhancement (ACE) circuit - the system that actively resists body roll by apply...

Anti Roll Bar Link

Hex Nut, M24 x 1.5mm securing the constant-velocity (CV) joint stub shaft to the wheel hub within the driveline. The nut retains the CV joint and ...

4

Anti-Roll Bar Link - Front is a drop link in the front stabilizer bar assembly. The link connects the end of the front anti-roll bar to the front ...

Lower Front Suspension Arm Ball Joint - 35 mm The lower ball joint forms the bottom pivot between the front lower suspension arm and the wheel knu...

Power Steering Reservoir Cap - the screw cap that closes the power steering fluid reservoir in the hydraulic steering circuit. It seals the reserv...

Power Steering Hose - Supply & Return - pressure hose assembly connecting the power steering pump to the rack-and-pinion steering gear. It car...

Washer and Screw - a screw supplied together with its washer as a single fastener assembly. This is a multi-purpose fixing used at a range of body...

Supercharger Drive Belt Bracket - mounting bracket within the belt drive arrangement of the 4.2L AJ V8 supercharged petrol engine. Bolts to the fr...

Drive Belt Bracket - accessory drive bracket for the 4.4L AJ V8 EFI petrol engine (220 kW), part of the pulleys and drive belts assembly. Bolts to...

V-Belt

Auxiliary Drive Belt - the primary accessory drive belt for the 4.2L supercharged and 4.4L EFI AJ V8 petrol engines. Driven from the crankshaft pu...

V-Belt

Belt Tensioner Pulley for the upper primary position of the auxiliary drive belt on AJ-V8 engines, covering the 4.4L V8 and 4.2L V8 Supercharged va...

Belt Tensioner Pulley for the auxiliary drive belt system on the 2.7L TDV6 Diesel engine. This pulley maintains correct tension on the auxiliary d...

Belt Tensioner for the auxiliary (accessory) drive belt system. The spring-loaded tensioner arm and pulley maintain the correct tension on the ser...

Belt Tensioner - 4.4 V8 AJ is the automatic tensioner of the accessory (auxiliary) drive belt system, holding the correct running tension on the pr...

Intercooler Hose - RH for the charge air intercooler circuit on the 3.6L TDV8 Twin-Turbo V8 Diesel engine. This right-hand hose is part of the int...

Intercooler Hose - Upper - LH for the charge air intercooler circuit on the 3.6L TDV8 Twin-Turbo V8 Diesel engine. This upper left-hand hose is pa...

Hose

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...

Coolant Hose Assembly for the 2.7L TDV6 (Lion V6) diesel engine cooling circuit, supplied as a moulded hose assembly with the thermostat and its ho...