Land Rover Accessories

Rear Inward-Facing Seat in black trim. This individual inward-facing seat mounts in the load area to provide additional occasional seating. Inward...

Anti-Roll Bar Bush in polyurethane, 28mm bore, for the rear anti-roll bar mounting. The bush sits where the bar is clamped to its chassis brackets...

Rear Bumperettes - a pair of tubular bumperettes that bolt to the rear crossmember to protect the rear corners of the body and the rear lamps from ...

Wheel Nuts - set of five, sufficient to secure one wheel. The nuts are sized for the MaxXtrac Mach 5 alloy wheel, giving the correct seat and thre...

M16 Hex Nut is a plain hexagonal fastening nut used across the towing and body hardware. It is most commonly used to secure the tow ball to the to...

Anti-Roll Bar Spacer Kit - 2-Hole for Land Rover Defender. These spacers are used to correct the anti-roll bar drop link geometry on lifted Defend...

Swivel Recovery Eye Rotating recovery point that bolts through the recovery-point holes in a winch bumper, providing a secure anchor for a shackle ...

7 inch high low beam headlight LHD black, with U shape parking light, (PAIR)

Jack Adapter that provides a secure jacking point for a recovery jack. Bolts into the existing holes under the front bumper and rear crossmember t...

Sill Protector Pair - aluminium sill guards that mount along the lower body sills beneath the doors. They shield the sill panels from stone chips,...

Lamp Guard Set - Rear - Hinged Hinged rear lamp guard set that protects the rear lamp lenses from stone strike and low-speed impact during off-road...

Spare Wheel Cover in plain black vinyl, sized to fit a 600 x 16 spare wheel and tyre (roughly a 195/80 R15 metric equivalent). It slips over the m...

Tow hitch 110 TD5 adjustable

Multi-Height Tow Bar is a towing assembly for the high-capacity pick-up and crew cab body styles, mounting to the rear of the chassis. The multi-h...

Rear Light Guard - Single - Natural is a steel mesh protective guard for a single rear lamp. It bolts over the rear lamp lens to shield it from im...

Tow Hitch Assembly for the rear towing system, supplied complete with tow ball. It mounts to the rear chassis towing points and provides the coupl...

Body Side Steps - a matched pair of fixed side runners for the lower body sides. Mounted along the sill line to the body and chassis fixing points...

Rear Bumper Corners are a pair of heavy-duty wraparound bumperettes that protect the vulnerable rear corners and sill ends of the bodywork. The po...

Winch Bumper for the Land Rover Defender, in the non-air conditioning configuration. The bumper replaces the standard front bumper assembly and in...

Rear Door Protection Plate mounts on the exterior of the rear door to shield the panel from stone chips, scuffs and impact damage during loading an...

Body Side Step is a folding side step for the Defender, mounting to the body sill to provide a step for vehicle entry and exit. The step folds fla...

Side Steps - a matched left- and right-hand pair of fixed tubular side runners that bolt to the sill and chassis mounting points, forming a continu...

Side Steps - a matched left- and right-hand pair of tubular side runners that bolt to the sill and chassis mounting points, forming a continuous no...

Differential Guard is a galvanised bolt-on steel guard that shields the differential housing on the axle from impact and debris off-road. It clamp...

Towing Bracket Slider is the sliding tongue section of a Dixon Bate adjustable towing bracket, which sets and locks the hitch at the required heigh...

Bonnet Protector - a 3 mm aluminium plate that mounts over the bonnet to shield the panel from stone chips and debris. It is pressed to the bonnet...

Towing Bracket Assembly Front-mounted detachable towing bracket that bolts to the front chassis to provide a towing and recovery point at the front...

Sill Protector - Aluminium Chequer Plate for the Defender 90. This aluminium chequer plate protector bolts over the door sill to shield it from sc...

Wing Protector - Long - 3mm Aluminium for the Defender front wings. Aluminium chequer-plate protector that mounts over the front wing tops of the ...

Rope Hook - a securing hook for the canvas hood (soft top). It provides an anchor point around which the hood tie-down rope is passed, holding the...

Raised Air Intake relocating the engine air intake to an elevated position at the right-hand A-pillar, drawing clean air from above the wing line. ...

Sliding Window Pair - clear glass side windows within the body glazing, supplied as a pair. Each framed unit carries horizontally sliding clear gl...

Roof Centre Console for the Defender Hard Top and Station Wagon interior headlining. The console features a single DIN radio aperture with removab...

Side Locker - a stainless steel storage box that mounts in the rear side quarter, set behind the inner rear wheel arch on the left-hand side. The ...

Front Spring Spacers fit between the front axle and the base of the front coil spring to raise the spring mounting point. The spacers are 50mm (2 ...

Twin Shock Mount Kit - Rear provides the additional mounting points required to run twin rear shock absorbers on each side of the rear axle. The ad...

Suspension Kit providing 2 inches of lift in a heavy load configuration, combining rated coil springs with All Terrain shock absorbers. The heavy ...

All-Terrain Suspension Kit - 2-Inch Lift, Medium Load for Defender 110 and 130, by Terrafirma. This spring and shock absorber upgrade raises the ve...

Suspension Kit providing 2 inches of lift in a medium load configuration, combining rated coil springs with All Terrain shock absorbers. Designed ...

Terrafirma All Terrain Suspension Kit - Light Load, +2" (50mm) Lift for Defender 90, Discovery 1 and Range Rover Classic. This is a RAISED suspens...

Shock Absorber for the rear coil spring suspension system. This big-bore unit is designed for heavily laden and expedition applications where sust...

Big Bore Expedition Shock Absorber - front position, standard ride height. The damper installs between the front axle mounting and the chassis bra...

Terrafirma medium load rear springs (pair) 90/D1/RRC

Past op alle modellen met airco en voorzien zijn van een  Superwinch LP of Talon &amp: Tiger Shark lier tot 12000lbs

Rear Light Guard Set for Defender models fitted with a rear-door-mounted spare wheel. The set comprises one square guard and one L-shaped guard, f...

Tow Slider - Adjustable Saddle Type for the Dixon Bate adjustable tow bracket system. This is the vertically sliding saddle piece in the Dixon Bat...