for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Boost your vehicle's fuel economy and performance with the EGR Blanking Kit for Discovery 3 and Range Rover Sport 2.7 TDV6 engines (up to VIN 7A, n...
View full detailsThis new Terrafirma winch has a powerful 6hp, 12v motor combined with a 3-stage planetary gearbox that gives over 5 tonnes of pulling power. It has...
View full detailsWheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...
View full detailsSnatch Block - a winch recovery pulley used to redirect a winch line or to double its effective pulling capacity. Rated for a 10-tonne working load...
View full detailsBolt is an M8 x 80 mm threaded fastener used to clamp two components together at a bolted joint. It is tightened into a threaded hole or secured w...
View full detailsEnsure the secure and hassle-free lowering and raising of your spare wheel with this spare wheel winch, designed for Land Rover models with an unde...
View full detailsWind Deflector Kit - a set of four smoke-tinted wind deflectors that mount along the front and rear door window frames. Each deflector is supplied...
View full detailsTow Bar Wiring Kit - a dedicated 13-pin towing electrics loom that links the vehicle's lighting and auxiliary circuits to a trailer or caravan conn...
View full detailsDiscovery 3 Haynes Manual
Winch Remote Control operates an electric recovery winch wirelessly, allowing the operator to stand clear of the winch line during recovery. Wirel...
View full detailsFinisher Clip - a retaining clip for exterior body finishers and mouldings. The clip secures a trim finisher or moulding to the body panel, engagi...
View full detailsLand Rover Oval Name Badge - exterior identification emblem carrying the Land Rover name in gold lettering on a green ground. Fitted to the front ...
View full detailsAdjustable Tow Bar Kit with quick-disconnect coupling for the rear towing system. The height-adjustable drop plate lets the tow ball height be set...
View full detailsRear Mudflap Kit mounts at the rear of the vehicle to reduce road spray and protect the lower bodywork and rear window from mud and debris. Intend...
View full detailsHook & Loop Fastening Strap for securing and bundling loose items within the vehicle interior, cargo area, or workshop. The strap wraps around ...
View full detailsRaised Air Intake relocating the engine air intake to an elevated position at the A-pillar, drawing clean air from above the standard bonnet-level ...
View full detailsSwing Away Spare Wheel Carrier for the Discovery 3 and 4, providing an external spare wheel mounting position at the rear of the vehicle. The carr...
View full detailsTow Hook Protective Cap is a cover for the towing eye aperture in the bumper. It closes off the tow hook mounting point when not in use, keeping o...
View full detailsTow Slider - Adjustable Saddle Type for the Dixon Bate adjustable tow bracket system. This is the vertically sliding saddle piece in the Dixon Bat...
View full detailsTowing Jaw rated to 3.5 tonnes, part of the towing/pintle hitch assembly. It provides the jaw coupling for trailer and recovery towing, mounting t...
View full detailsLED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...
View full detailsRoof Rack Fitting Kit - the mounting hardware that secures a roof rack system to the vehicle's longitudinal roof rails. It supplies the fixing par...
View full detailsSpare Wheel Cover - 235/70 R16 - vinyl cover for an externally mounted spare wheel, sized to a 235/70 R16 tyre. The cover pulls over the assembled...
View full detailsRaised Air Intake - Top Section, the replacement upper section of the Terrafirma raised air intake. This is the head of the intake: the part that ...
View full detailsAwning Mounting Brackets - bracket set for mounting a side awning to the TF972 tubular roof rack. The brackets locate on the roof rack itself rath...
View full detailsRear Mudflap Kit mounts at the rear of the vehicle to reduce road spray and protect the lower bodywork and rear window from mud and debris. Intend...
View full detailsFront Mud Flap Kit for the front wheel arches. Mounted behind the front wheels, these mud flaps deflect road spray, mud and stone chips thrown up ...
View full detailsMudflap Kit Front Replacement
Lockable Retainer Handle for the detachable tow bar system. It secures and locks the removable tow bar neck into the receiver, and is supplied wit...
View full detailsLockable Retainer Handle for the detachable tow bar system. It secures and locks the removable tow bar neck into the receiver, and is supplied wit...
View full detailsRoof Rack Front Spoiler - Without Light Recesses - wind deflector that mounts across the leading edge of the TF972 tubular roof rack. The spoiler ...
View full detailsSump Guard is an underbody skid plate that protects the engine sump and undercarriage from impact and debris, forming the front section of the vehi...
View full detailsFront Light Mounting Bar - tubular bar that provides a mounting platform for auxiliary driving lamps at roof-rack level. The bar carries mounting ...
View full detailsSide Steps - fixed (non-deploying) sill-mounted steps in the Terrafirma OE-style pattern. Each step has a ridged black rubber tread surface for gr...
View full detailsRear Access Ladder - tailgate-mounted ladder giving safe access to a roof rack and roof-carried load. Fabricated from steel tube and box section a...
View full detailsRoof Rack Cross Rail for the roof rail and cross bar load-carrying system. The cross rail clamps across the vehicle's longitudinal roof rails, whi...
View full detailsHalf-Length Rubber Loadspace Mat lines the floor of the luggage compartment. Moulded in rubber with a raised edge, it protects the loadspace floor...
View full detailsFBH Controller (GSM) is a remote control and monitoring module for the Webasto fuel-burning auxiliary heater used on TDV6 diesel applications. It a...
View full detailsDog Guard - full-height mesh luggage partition that separates the loadspace from the passenger compartment. The frame spans the full width and hei...
View full detailsFlip-Up Window Storage Bin - Left Hand - an enclosed storage compartment that fits inside the TF984 left-hand flip-up side window, converting the a...
View full detailsRaised Air Intake & 4 - Discovery 3
Flip-Up Side Window - Right Hand - an aluminium replacement for the fixed rear side glass, giving direct access to the load space from outside the ...
View full detailsFlip-Up Side Window - Left Hand - an aluminium replacement for the fixed rear side glass, giving direct access to the load space from outside the v...
View full detailsWheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...
View full detailsRubber Floor Mat Set - moulded mats shaped to the cabin footwell contours. The rubber construction protects the vehicle floor from dirt, moisture ...
View full detailsTow Ball Security Plate - an anti-theft plate for vehicles fitted with a removable swan-neck tow ball. The plate is cut from 8mm stainless steel a...
View full detailsLockable Tow Ball Handle Assembly for the detachable tow ball system. It locks the removable tow ball into the receiver to secure it against remov...
View full detailsTow Hitch for the towing system, rated to a maximum gross towing weight of 3,500 kg. The hitch bolts to the tow bar and carries the tow ball, prov...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026