for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Door sill panels in stainless steel, covering the outer sill rail below the front door apertures. Supplied as a pair. The sill is the exposed body...
View full detailsFog light cover set - a pair of chrome-finished plastic surrounds that fit over the front bumper fog lamp apertures. The covers locate around the ...
View full detailsDog Guard - Upper Only - RRS
Ram Air Intake - left-hand wing-mounted intake with an integral mesh grille. Moulded plastic intake scoop that channels air toward the induction s...
View full detailsMud Flap Stay - Galvanised is the steel support bracket that braces a rear mud flap and holds it in position behind the wheel. It fixes the mud fl...
View full detailsPedal Kit - replacement pedal covers for the driver's footwell. The covers fit over the existing brake and accelerator pedal pads and are retained...
View full detailsDog Guard - Upper Half - load-space partition, upper section only. Mounts behind the rear seat backrests and closes off the upper part of the open...
View full detailsMud Flap Bracket is the right-hand rear mudflap retention bracket - the stay that mounts the rear mud flap to the body and holds it in position beh...
View full detailsRadiator Muff in black - a fabric cover that fits across the front grille panel to restrict airflow through the radiator. In cold weather it short...
View full detailsMud Flap Bracket is the left-hand rear mudflap retention bracket - the stay that mounts the rear mud flap to the body and holds it in position behi...
View full detailsFront mudflap brackets, supplied as a pair, forming part of the front wheel arch and mudflap assembly. The bracket bolts to the underside of the b...
View full detailsStainless Bracket Only - Defender 110 130
Raised Air Intake Snorkel - relocates the engine air intake from the wing to roof level, so induction air is drawn from above the bonnet line. Sup...
View full detailsSide Step Rubber Tread - replacement rubber top panel for a tubular side step. The tread is moulded to fit over the upper face of the step tube an...
View full detailsTubular Winch Bumper replaces the standard front bumper and provides a mounting platform for a recovery winch. The tubular steel construction adds...
View full detailsMud Flap Assembly protects the rear bodywork and lower panels from stones, mud and road debris thrown up by the rear wheel. This is the left-hand ...
View full detailsWheel Arch Kit - set of replacement wheel arch mouldings for the outer body panels. The mouldings cover the joint between the body panel and the w...
View full detailsPortable Air Compressor - a heavy-duty 12V twin-pump tyre inflator that runs directly from the vehicle battery. The double-pump design delivers up...
View full detailsElectric Winch is a 12V recovery winch with a single-line rated pull of 9,500 lbs (4,309 kg), supplied with synthetic Dyneema rope. It is driven b...
View full detailsRear Mudflap Brackets - Galvanised - pair of steel brackets that carry the rear mudflaps behind the rear wheels. The bracket bolts to the undersid...
View full detailsPortable Refrigerator is a 50-litre wheeled unit for overland travel and touring, keeping food and temperature-sensitive supplies chilled away from...
View full detailsRear Wing Protector in aluminium chequer plate, guarding the rear wing top and corner - one of the most exposed panels on the body. Fits over the ...
View full detailsChequered Sills 90 - Pair
Discreet Winch Mount
Seat Box Corner Protector - Pair - Black Steel
Rear Mudflap for the left-hand side, part of the exterior underbody protection assembly. Fitted behind the rear wheel, it shields the lower rear b...
View full detailsWolf H Lamp Guard Front Kit - Defender
LED Daytime Running Lights - a pair of Ring LED running lamps for the DA8600 front bumper. Each lamp uses 5 x 1.5W LEDs and measures 57 mm (H) x 1...
View full detailsMud Flap
Bow Shackle Bow-shaped recovery shackle with a threaded pin, used to connect a recovery strap or rope to a recovery point on a winch bumper. The w...
View full detailsJack Clamp - anti-rattle handle clamp for a high-lift jack, in yellow. The clamp holds the jack handle against the steel standard bar so the handl...
View full detailsPlain Mudflap (No Logo)
Steering & Sump Guard - underbody skid plate. This guard fits beneath the front of the vehicle to shield the steering linkage and the engine s...
View full detailsSynthetic Fibre Shackle is a soft recovery shackle used to join ropes, strops and recovery points when rigging a vehicle recovery. Supplied as a pa...
View full detailsChubby Box Techno
Rear Mudflap for the left-hand side, part of the exterior underbody protection assembly. Fitted behind the rear wheel, it shields the lower rear b...
View full detailsDriving Lamps Pair 8 Inch Black
Tow Ball Step is a rear access step that locates over the tow ball, providing two tread levels to make reaching the rear door, load area or roof ea...
View full detailsElectric deployable side steps, supplied as a pair complete with the operating electrics. The steps extend automatically when a door is opened and...
View full detailsRear Wheelarch Eyebrow Moulding for the body exterior, supplied in a matt finish. The moulding fits over the rear wheelarch aperture, covering the...
View full detailsHeadlamp Guard in moulded plastic. A protective guard fitted over the headlamp lens to shield it from stone chips, debris and impact damage. Suppl...
View full detailsStep Assembly - Rear - Defender 90 XA On
Dinitrol 977 Water-based Underbody Coating - 1 litre. An anti-corrosion coating for underbody panels, wheel arches and exposed chassis components, ...
View full detailsRear Differential Guard is a bolt-on protective plate that shields the rear axle differential housing from impact and abrasion during off-road use....
View full detailsX-Hinge Roof Tent - a hard-shell two-person roof tent for 4x4 and overland vehicles, mounted on roof bars or a roof rack. X-hinge opening system T...
View full detailsSilicone Turbo Hose Kit - a set of reinforced silicone hoses that replace the original charge-air (boost) hoses in the turbocharger and intercooler...
View full detailsHeadlamp Guard in clear acrylic, fitting over the headlamp to shield the lens from stones, branches and debris thrown up during off-road and rough-...
View full detailsWarning Triangle - a foldable reflective warning triangle with a 16 cm side length, for use when a vehicle is stationary on or near a road. Folds ...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026