for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Floor Contour Mat Kit - four-piece moulded rubber footwell mat set, covering the front and rear footwells. The mats are contoured to the shape of ...
View full detailsMats - Floor - Rubber - Set
Kit - Floor Contour Mat
Loadspace rubber mat for the rear load compartment, part of the interior protection group. The mat is tailored to the loadspace floor and protects...
View full detailsMats - Floor - Rubber - Set
Tow Bar Electrics Kit
Side step wiring harness - the electrical loom for a power deployable side step installation. It connects the side step drive motors to the side s...
View full detailsTow Bar Electrics
Tow Bar Electrics
Tow Bar Electrics
Loadspace Mat - moulded rubber mat for the loading compartment floor, part of the interior protection range. Lies over the loadspace floor coverin...
View full detailsintegral bumper and nudge bar .BA 009 BB2013
Tow Bar Electrics - the towing electrical wiring harness that links the vehicle rear loom to the trailer connector, forming the electrical half of ...
View full detailsRear upper lamp guards, supplied as a pair with their fittings, part of the exterior lamp protection group. The guards are contoured metal frames ...
View full detailsLamp
Spare Wheel Cover - protective cover for the externally mounted spare wheel on the rear door. Fits over the exposed face of the spare wheel and ty...
View full detailsSeat Cover - tailored front-row seat protection within the interior protection assembly group. Each cover encloses the complete seat, including th...
View full detailsCover - Spare Wheel
Seat Cover Set - third-row seat protection, part of the interior protection range. Supplied as a set covering the third-row seats in the 5+2 seati...
View full detailsSpare Wheel Carrier - a swing-away rear carrier that takes the spare wheel off the rear door and transfers its weight into the body structure, reli...
View full detailsSeat Cover - tailored second-row seat protection within the interior protection assembly group. The covers are cut for the second-row bench in the...
View full detailsRoof Rack Cross Rail for the roof rail and cross bar load-carrying system. The cross rail clamps across the vehicle's longitudinal roof rails, whi...
View full detailsDog Guard - full-height mesh luggage partition that separates the loadspace from the passenger compartment. The frame spans the full width and hei...
View full detailsRaised Air Intake & 4 - Discovery 3
Wheel Arch Protection Kit - a four-piece set of extended wheel arch mouldings within the exterior body protection assembly group. The mouldings mo...
View full detailsSide Step Fixing Kit
Front Protection Bar - an A-frame nudge bar for the front exterior protection assembly. The bar is a single-piece construction with a textured bla...
View full detailsSide Step Motor - Right Hand - electric drive motor for the power deployable side step (running board) assembly, right-hand side. The motor drives...
View full detailsSide Step Motor - Left Hand - electric drive motor for the power deployable side step (running board) assembly, left-hand side. The motor drives t...
View full detailsRear Mudflap >AA - 90 - LH
Cover Assembly
Light Guard - Rear Upper Protective guard for the upper rear lamp cluster, forming part of the exterior lighting protection assembly. The guard mo...
View full detailsFitment: Freelander 1
Rubber Floor Mat Set Tailored rubber floor mat set for the passenger compartment, supplied as a set of four. The moulded mats locate over the fron...
View full details13-Pin Tow Socket for the trailer electrical connection, mounting at the rear of the vehicle within the towing wiring circuit. The 13-pin format c...
View full detailsTouch-Up Paint Pencil applies the Epsom Green body colour to small stone chips and scratches in the paintwork. The pencil applicator gives accurat...
View full detailsRaised Air Intake Kit
Rubber Floor Mat Set - moulded mats shaped to the cabin footwell contours. The rubber construction protects the vehicle floor from dirt, moisture ...
View full detailsRear Tow Hook - a bolt-on recovery and towing point fitted to the rear of the chassis. It provides a solid attachment for a tow rope or recovery s...
View full detailsRoof Rail Front Gasket, the sealing gasket fitted at the front of the roof side rail. It seats between the side rail and the roof panel, sealing t...
View full detailsMudflap Retention Bracket - the mounting bracket that secures the rear mudflap to the underbody. It holds the flap square and rigid behind the whee...
View full detailsMudflap Retention Bracket - the mounting bracket that secures the rear mudflap to the underbody. It holds the flap square and rigid behind the whee...
View full detailsPush Button Switch is a push-push on/off accessory switch for the auxiliary switch panel. The latching push-push action toggles an accessory circu...
View full detailsTrailer Coupling Wiring Harness - the vehicle-side loom of the towing electrical installation, running from the rear body harness to the trailer so...
View full detailsFront Bumper Protection Moulding - exterior trim component of the front bumper assembly. The moulding fits to the front bumper cover and protects ...
View full detailsMoulding - Front Wheel Arch
Door Sill Moulding is an exterior body moulding that runs along the lower edge of the door at the sill line. Part of the exterior body trim group,...
View full detailsTrailer Coupling Wiring is the vehicle-side electrical harness of the towing electrics installation, connecting the body harness to the 13-pin trai...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026