for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Rear Sports Silencer for the 1.8L 4-cylinder petrol engine, manufactured in stainless steel with a twin-pipe outlet (two 3-inch roll-top tailpipes)...
View full detailsFlip-Up Window Storage Bin - an enclosed storage compartment that fits inside the TF979 alloy flip-up side window, part of the body side and load s...
View full detailsFlip-Up Window Storage Bin - Left Hand - an enclosed storage compartment that fits inside the TF984 left-hand flip-up side window, converting the a...
View full detailsPortable Power Station - a self-contained 500 W battery power supply for camping, expedition and remote working. The unit is built around a 481 Wh...
View full detailsRock Sliders with Tree Bars - chassis-mounted side protection for the sills and lower body, supplied as a pair. Each slider is fabricated from ste...
View full detailsRock Sliders with Tree Bars - chassis-mounted side protection for the sills and lower body, supplied as a pair. Each slider is fabricated from ste...
View full details270° Terradactyl Awning - self-supporting wrap-around awning that mounts on the left-hand side of the vehicle and, once opened, shades the side and...
View full detailsTubular Winch Bumper - front winch-mounting bumper for vehicles without air conditioning, supplied without an A-bar. All-in-one tubular constructi...
View full detailsLED Light Grille Kit - Discovery 4 - 2014 On
Tred Rock Sliders - 90
Side Steps Including. Mudflaps Rear
LED Driving Cube - auxiliary driving lamp with a combination beam and an integrated position light, for bracket or bar mounting. 16 high-performan...
View full detailsTred Winch Bumper - No AC
Bar - 40LED Light Combination - ARB
Rock Sliders with Tree Bars - chassis-mounted side protection for the sills and lower body, supplied as a pair. Each slider is fabricated from ste...
View full detailsRoof Rack - 110 - L663
Rear Step Tow Bar - a combined rear step and towing bracket that bolts to the rear cross member as a single fabricated assembly. NAS (North America...
View full detailsRear Step Tow Bar - a combined rear step and towing bracket that bolts to the rear cross member as a single fabricated assembly. NAS (North America...
View full detailsRear Step Tow Bar - a combined rear step and towing bracket that bolts to the rear cross member as a single fabricated assembly. NAS (North America...
View full detailsDeployable Side Steps - powered running boards that stow beneath the sill and extend automatically when a door is opened. With the doors closed th...
View full detailsSwag Skydome Double
LED Light Bar - 50"
Light Bar Mounting Brackets - Bottom A pair of bottom mounting brackets forming part of the mounting hardware for a single-row LED light bar. Each...
View full detailsFlip-Up Window - Alloy
Tred Rock Sliders - 110
Heavy Duty Rear Bumper - steel rear bumper replacing the original moulded plastic bumper assembly. Fabricated from steel and finished in black pow...
View full detailsWinch Bumper - P38
Tred Rock Sliders - 130
Flip-Up Side Window - Right Hand - an aluminium replacement for the fixed rear side glass, giving direct access to the load space from outside the ...
View full detailsFlip-Up Side Window - Left Hand - an aluminium replacement for the fixed rear side glass, giving direct access to the load space from outside the v...
View full detailsRock Sliders - L663 - 90
Rear Bumper - steel replacement rear bumper in the Raid style, forming the rear impact and recovery structure in place of the original bumper and v...
View full detailsExplorer Roof Rack is a full-length external load rack that mounts to the vehicle roof to carry luggage and equipment above the cabin. The platfor...
View full detailsExternal Roll Cage - six-point full external roll over protection system mounting to the outside of the bodyshell, so that occupant and load space ...
View full detailsRoll Cage - 6-Point External Bolt-In is a full external roll cage that bolts to the vehicle at six mounting points. Being an external design, the ...
View full detailsRetrofit Air Conditioning Kit for TDCi applications originally built without factory air conditioning. This kit supplies the components required t...
View full detailsFront Door Armrest for the right-hand front door, mounting to the door trim. The armrest fixes to the inner door, giving the occupant a padded res...
View full detailsReduce mud splashes and dirt buildup with these Dirt D-Fenders, designed for Land Rover Defender 90, 110, and 130 models. These smooth-finish D-Fen...
View full detailsRaised Air Intake for the engine air induction system, mounting on the right-hand side of the vehicle. The raised intake relocates the air inlet hi...
View full detailsWheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...
View full detailsJerry Can Spout Cap Kit – a replacement set for the Terra Can fuel and water container. The kit comprises the filler cap, the pouring spout and th...
View full detailsLockable Jerry Can Bracket for securing a jerry can against theft and movement on a vehicle-mounted can holder. The bracket clamps over the can an...
View full detailsHard Case Awning - vehicle-mounted pull-out shade awning housed in an aluminium hard case, 2.0m wide with a 2.5m extension. Grey 400D ripstop canv...
View full detailsAwning Front Extension closes off the front of a 1.25m expedition awning to add a rain break, windbreak or sunshade. Made from grey 200D ripstop f...
View full detailsExpedition Awning - a 1.4m vehicle-mounted awning providing quick shade and shelter along the side or rear of the vehicle. The grey 400D water-res...
View full detailsGet detailed guidance on servicing and repairs for your Land Rover Freelander (1997 - October 2006, R to 56 reg) with this Haynes workshop manual. ...
View full detailsHaynes Manual & Petrol & Diesel - Series 2A Series 3
Awning Cover - replacement stowage cover for the Terrafirma 2.5m 270° Terradactyl awning. Heavy-duty PVC-coated nylon cover that encloses the fold...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026