for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Cooler Bag - an insulated shoulder-carried cool bag for expedition and vehicle-based outdoor use. Built from waterproof 900D fabric over a waterpr...
View full detailsSide Sill Protectors - Chequer Plate, supplied as a left- and right-hand pair for the outer body sill panels beneath the door apertures. Pressed f...
View full detailsBumper Mounted Light Bar - a tubular steel mounting bar that provides a raised platform for auxiliary lighting above the front bumper. The bar is ...
View full detailsWind Deflectors - Set of 4 - RRS 05-13
Tred Front Winch Bumper + AC
Flip-Up Window Storage Bin - Right Hand - an enclosed storage compartment that fits inside the TF985 right-hand flip-up side window, converting the...
View full detailsHoneycomb Front Grille is a direct replacement for the original front grille panel, in a honeycomb mesh pattern with a matt black finish. It fits ...
View full detailsRear Quadrant Plate - a chequer plate panel for the quadrant section of the station wagon rear body side, within the exterior body protection assem...
View full detailsWind Deflectors - Set of 4 - Discovery 5
Tow Bar Kit
Side Wing Vent Grille - the air intake vent grille set into the side of the front wing, part of the Sport-style front end trim range. It is a dire...
View full detailsReceiver Hitch Pin - retaining pin for a 2in receiver hitch assembly. The receiver housing has a 2in internal bore that accepts a 2in square-secti...
View full detailsStorage Box Lid & Clips - High
LED Driving Light Bar - 250 mm auxiliary light bar with a spot beam for far-field illumination. 9 high-performance LEDs produce up to 1500 lumens ...
View full detailsLED Grille Kit - Discovery 4 - 2009-14
Fuel tank guard in aluminium, part of the underbody protection group. It mounts beneath the fuel tank and shields it from rock strike and impact d...
View full detailsSoft Top Roll Cage - 8 Point is a combined internal and external roll-over protection system that replaces the factory soft top hoop set, built to ...
View full detailsPolo Shirt in black and red, size X-Large. 100% cotton and machine washable, with an embroidered Terrafirma logo on the left chest and the right s...
View full detailsBonnet Chequer Plate - protective panel for the bonnet centre section, shielding the aluminium bonnet skin from scuffing by loads, footwear and bra...
View full detailsRear Mudflap Brackets - Pair - 110 130
Fuel Filler Surround Plate - a chequer plate panel framing the fuel filler aperture in the rear body side, within the exterior body protection asse...
View full detailsTrack Mat Mounting Kit
Wing Top Protector Kit - chamfered protector panels for the front wing tops. The panels cover the wing top, the area most exposed to scuffing from...
View full detailsLED Light Bar - 20"
Raid Style Front Winch Bumper - a tubular replacement front bumper with an integrated winch mounting bed. The tubular frame and swaged infill pane...
View full detailsStorage Box Mounting Brackets - bracket set that secures expedition storage boxes to a T-slot roof rack. The brackets clamp into the rack's T-slot...
View full detailsLED Driving Lightbar MX250-CB
Amber LED Utility Light - a compact surface-mounted auxiliary lamp giving wide-angle amber light at close range. The unit carries 3 x 3 W CREE LED...
View full detailsRaid Style Rock Sliders - tube-construction sill bars that protect the sills and lower body sides from rock and obstacle damage. The bars carry a ...
View full detailsScreen Hoop & Side Rails - 45mm - four-point external roll over protection bar in 50th Anniversary style, mounting to the outside of the bodysh...
View full detailsTred Pro Black/Black
Compressor guard for the air suspension system, part of the underbody protection group. The guard shields the air suspension compressor and its mo...
View full detailsAir Conditioning Retrofit Kit - a complete air conditioning installation for the Td5 2.5L 5-cylinder turbo diesel, in left-hand drive configuration...
View full detailsTow Bar Electrics Kit
Stackable storage box with low lid, moulded in high density polyethylene. The design originates from ammunition box practice: vertical sided to mak...
View full detailsSingle bike carrier for roof cross bar mounting, carrying one bicycle upright on the vehicle roof. The carrier clamps to a pair of transverse roof...
View full detailsExterior Fold Down Shelf - body-side shelf that folds down to give a working surface outside the vehicle. Built from a combination of black powder...
View full detailsSoft Top Roll Cage - 6 Point is a heavy duty internal roll-over protection system supplied as a replacement for the factory soft top hoop set, secu...
View full detailsSoft Shell Jacket in black, size XX-Large. Zip-front soft shell construction with contrast striping across the shoulders. The Terrafirma logo is a...
View full detailsSafari Shirt in black, long sleeve, size XX-Large. Semi-cutaway relaxed collar with square-edge adjustable cuffs. The sleeves roll up and tab in p...
View full detailsHawse Fairlead - aluminium rope guide for the winch mounting assembly, bolting to the fairlead face of a winch bumper or winch mounting plate. The...
View full detailsStainless Steel Travel Mug for expedition and camping use. Supplied as loose equipment; no vehicle installation is required. Stainless steel const...
View full detailsScreen Hoop & Side Rails - four-point external roll over protection bar in 60th Anniversary style, mounting to the outside of the bodyshell. B...
View full detailsChequer Plate - Rear Quadrant - Pair protects the rear quadrant panels - the body sections behind the rear wheel arches - from stone chipping, scuf...
View full detailsRear Drawer System - a heavy-duty sliding storage unit for the load area, sized to sit between the rear wheel arches. The drawer runs on rollers a...
View full detailsWinch Rope Safety Hook - the terminal hook fitted to the working end of the winch rope, forming the connection between the rope and the shackle, st...
View full detailsOff-Road Shovel of all-steel construction with a 1.3m handle, for digging out and clearing ground during off-road and expedition use. The long han...
View full detailsFront Mud Flaps - moulded flaps mounted behind the front wheels to catch water, grit and stone thrown forward by the tyres. Fitted at the trailing...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026