for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Towbar - rear towing assembly that bolts to the vehicle's designated rear chassis mounting points and carries the tow ball for trailer and caravan ...
View full detailsTrailer Board - a portable rear lighting board for a trailer that carries no lighting of its own, or for a towed or overhanging load that obscures ...
View full detailsEz Deflator
Headtorch - Intensity 300
Work lamp, round, adjustable - a self-contained auxiliary lamp for illuminating a work area, carried on an adjustable mounting so the beam can be a...
View full detailsFolding Side Step fits beneath the side doors as a step aid for entry and exit. The step folds upward when not in use to preserve ground clearance...
View full detailsRear Mud Flap Kit for the rear wheel arches. Mounted behind the rear wheels, these mud flaps deflect road spray, mud and stone chips thrown up by ...
View full detailsHi-Lift Jack - 60 in - all-cast high-lift jack on a 60 in (152 cm) standard bar, used for lifting, winching and clamping during off-road recovery. ...
View full detailsMud Flaps Front - RR L322
Combination Tow Ball and Jaw Unit - towing head assembly that bolts to the towing bracket, providing both a ball coupling and a jaw coupling from a...
View full detailsStowage Bag - Hi-Lift Jack - protective cover for a high-lift jack carried on or inside the vehicle, shielding the standard bar and the climbing me...
View full detailsMultimedia System - 10.1in - double-DIN infotainment head unit that replaces the factory radio in the centre console dash aperture. 10.1 in capaci...
View full detailsLED rear light upgrade kit, 95mm, clear lens - replaces the round 95mm rear lamp units with clear-lens LED equivalents, the signal colour being pro...
View full detailsAir Compressor Kit - a twin-motor 12-volt on-board air compressor for permanent vehicle mounting, supplying compressed air to engage ARB Air Locker...
View full detailsHandle Keeper - moulded rubber clamp that holds the jack handle against the upright standard bar, keeping it in place when the jack is not in use a...
View full detailsSimpson Tent
Wiring Kit - D Lamps
Headtorch - Intensity 155
Loc-Rac Mounting Kit - lockable mount for carrying a high-lift jack on a bedrail or comparable flat rail, holding the jack where it can be reached ...
View full detailsMud Flap Kit for the rear wheel arches. Reduces road spray, mud and stone throw from the rear tyres onto the lower bodywork and following traffic....
View full detailsEyebrow Kit is a full vehicle set of standard-width wheel arch eyebrows, mounted along the outer edge of each wheel arch. The eyebrows shield the ...
View full detailsARB Air Line Hose Kit (Heavy Duty)
Sound deadening panel for the rear tub area behind the front seats, forming part of the interior acoustic insulation. Applied directly to the bare...
View full detailsLED rear light upgrade kit, 95mm - replaces the round 95mm rear lamp units in the rear lighting circuit with sealed LED equivalents. The lamps are...
View full detailsWire Harness 13PIN - Defender 90 1
LED Lamp Load Resistor for use with LED replacement bulbs in the exterior lighting circuits. An LED lamp draws far less current than the filament ...
View full detailsHandle Keeper - moulded rubber clamp that holds the jack handle against the upright standard bar, keeping it in place when the jack is not in use a...
View full detailsTowbar electrics kit, 13-pin - vehicle-specific wiring kit that links the towing socket to the vehicle's rear lighting and electrical system. The ...
View full detailsRechargeable slim LED inspection lamp for workshop and roadside use. The lamp produces 500 lumens at a colour temperature of 5700 K from a slim, f...
View full detailsWaterproof Seat Covers - supplied as a pair, cut to fit the Defender front seats. Made from polyester with an EVA waterproof layer, the covers fit...
View full detailsTrasharoo Black
ARB Single Motor Portable Air Compressor Kit - a compact 12V tyre inflation and air solution for off-road and overlanding use. The compressor deli...
View full detailsMud Flaps for the front wheel arches, supplied as a pair in an anthracite finish. Fitted behind the front wheels at the lower body, the flaps defl...
View full detailsAir Compressor Kit - ARB compact on-board 12V unit for permanent vehicle mounting, designed to actuate up to two ARB Air Locker differentials. It i...
View full detailsHandheld Tyre Inflator - cordless 20 V air compressor for topping up tyres at the roadside and for re-inflating after airing down off-road. Inflat...
View full detailsSpare Wheel Cover in a gloss black and silver finish, for the tailgate-mounted spare wheel. Shields the spare tyre from sunlight, road dirt and st...
View full detailsSnorkel - raised air intake assembly that relocates the engine air intake from the wing top to roof level. The body mounts to the front wing and r...
View full detailsMud Flap for the rear wheel arch, left-hand side. Fitted behind the rear wheel at the lower body, the flap deflects road spray, mud and stone debr...
View full detailsPortable Air Compressor - a heavy-duty 12V single-pump tyre inflator that runs directly from the vehicle battery. The compressor connects to the b...
View full detailsDetachable Tow Ball is the removable towing neck of a detachable towbar assembly. The swan-neck ball locates into a captive socket on the vehicle's...
View full detailsAir Compressor - ARB on-board single-motor 12V unit for permanent vehicle mounting. It supplies compressed air to operate ARB Air Locker differenti...
View full detailsEnsuite Room Shower Tent is a free-standing enclosure that mounts to a roof rack and folds out to provide a private shower, change room and toilet ...
View full detailsDeluxe Awning Alcove is an enclosed extension for a 2.0m ARB awning, converting the open awning into a sheltered space for use as a windbreak, stor...
View full detailsBumper Tread Plate - a pair of protective tread plates for the bumper. Fitted over the bumper top surface, they guard the paintwork against scuffi...
View full detailsCargo Gear Bag - V3 - an external storage bag that straps to the spare wheel, carrying dirty recovery gear, wet kit and rubbish outside the cabin. ...
View full detailsHanging Organiser - a fabric campsite storage unit that hangs from a fixed point to keep travel and camping essentials off the ground and within re...
View full detailsToiletries Bag - travel wash bag from the ARB Cargo Gear range. A PVC toiletries bag designed to hang open for access, with multiple mesh and zip ...
View full detailsARB Intensity V2 21 LED Flood
Collection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026