for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Pocket Inspection Lamp - a compact hand-held inspection lamp sized to fit in a pocket, for illuminating engine bays, wheel arches and other confine...
View full detailsDual USB Charger Socket is a panel-mount auxiliary power outlet for the vehicle's 12V accessory circuit, fitting an existing 12V DC (cigarette-ligh...
View full detailsSnatch Block is a 12 T rated pulley block for the winching circuit, built in alloy with stainless steel fittings. The side plate swings away so th...
View full detailsHorn Push is a polished centre horn button that fits into the boss of a Mountney steering wheel and boss kit, operating the vehicle horn from the c...
View full detailsRear Corner Protector Kit - Silver
Bolt-On Recovery Points - structural recovery attachment points for the New Defender unibody platform, supplied as a pair. Cast steel construction...
View full detailsBolt-On Recovery Points - structural recovery attachment points for the New Defender unibody platform, supplied as a pair. Cast steel construction...
View full detailsSteering Wheel Boss for fitting an aftermarket steering wheel to a 48-spline steering column. This hub adapter converts the splined column to the ...
View full detailsSide Step End Caps - a set of eight replacement end caps that close the open ends of twin-tube side step assemblies. These caps fit the twin-tube ...
View full detailsWaterproof Seat Cover Set for the rear seats, tailored to the split rear bench. The set contains a cover for the two-seat section (back and base),...
View full detailsWaterproof Seat Cover Set for the front seats, supplied as a pair. Tailored to fit over the standard front seats and protect the original upholste...
View full detailsTerra Can Flat Container - 19 L, the large flat-profile can in the Terrafirma Terra Can range of moulded expedition containers. Moulded in tough L...
View full detailsJerry Can - 7.6L - Black
Ratchet Strap Set for securing loads during transport or storage. Supplied as a pair, each strap measuring 2 m in length. The ratchet mechanism te...
View full detailsFront Mud Flap Kit for the front wheel arches, anthracite finish. Mounted behind the front wheels, these mud flaps deflect road spray, mud and sto...
View full detailsTrasharoo Beige
Round LED driving lamp from the LEDriving Value (VX) range, using a wide beam pattern for near-field illumination. Supplied as a matched pair. A w...
View full detailsSpare Awning Cover for TF1710
LED Driving Light Bar - 500 mm auxiliary light bar with a spot beam for far-field illumination. 18 high-performance LEDs produce up to 2800 lumens...
View full detailsTread Plate - Rear Step Tow Bar - punched and serrated alloy step plate for the TF883 rear step tow bar and rear step tow bars of the same pattern....
View full detailsLocker Camping Chair
Jack Mounting Brackets are a pair of quick-release clamps for carrying the hydraulic climbing jack (TF3370) on the vehicle. The brackets secure th...
View full detailsCube LED work lamp from the LEDriving Value (VX) range, using a wide beam pattern. Supplied as a matched pair. A wide beam reflector spreads light...
View full detailsRear Light Mounting Bar - Straight - a tubular steel bar that mounts across the rear of the roof and carries auxiliary lighting above the rear door...
View full detailsAir Ram - the forward-facing intake head of a raised air intake (snorkel) system, in 3" diameter. Mounted at the top of the snorkel body, it draws...
View full detailsLED Driving Lightbar SX300-SP
Side Sills Pair - Silver - All Defender 90
Air Con Grill Surround - Gloss Black
LED Driving Lightbar FX250-SP
Side Sills Pair - Black - All Defender 90
Rear Light Mounting Bar - Curved - a tubular steel bar that mounts across the rear of the roof and carries auxiliary lighting above the tailgate. ...
View full detailsLockable Retainer Handle for the detachable tow bar system. It secures and locks the removable tow bar neck into the receiver, and is supplied wit...
View full detailsLED Driving Lightbar FX250-CB
Upgrade and protect your Land Rover Discovery 1 (3-Door) with this high-quality fibreglass wheel arch extension kit. Designed with notches cut out ...
View full detailsSide Sills Pair - Black - 110 S Wagon
Side Sill Protectors - chequer plate covers for the body sills below the doors, within the exterior body protection assembly group. The sills take...
View full detailsHeavy duty rear door spare wheel carrier, part of the rear door spare wheel mounting assembly. It replaces the original door-mounted carrier and bo...
View full detailsTrailer Adaptor for converting between a 7-pin and a 13-pin towing electrical connection. It lets a vehicle fitted with one connector standard be ...
View full detailsHinge Guard - 4 Door is a door security set fitted at the hinge-to-bulkhead joint of the front and second row doors. Each guard is made up of two ...
View full detailsHinge Guard - 2 Door is a door security set fitted at the hinge-to-bulkhead joint of the front doors. Each guard is made up of two precision-cut 2...
View full detailsSide Wing Vent Grille - the air intake vent grille set into the side of the front wing, part of the Sport-style front end trim range. It is a dire...
View full detailsSide Wing Vent Grille - the air intake vent grille set into the side of the front wing, part of the Sport-style front end trim range. It is a dire...
View full detailsFront LED light set with smoked lenses, 95mm diameter, supplied as a replacement for the original front lamp units. LED lamp units draw less curre...
View full detailsUnpainted Door Panels - two-piece blanking panel set for the rear door, fitted after the tailgate-mounted spare wheel and its carrier have been rem...
View full detailsTow Bar Electrics - 13-Pin
Wing Top Protectors - chequer plate covers for the upper surfaces of the front wings, within the exterior body protection assembly group. The wing...
View full detailsLED Driving Lightbar SX500-SP
Wing top chequer plate protectors, supplied as a pair in five-bar aluminium chequer plate with a silver anodised finish. The panels cover the uppe...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026