for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Tow Bar Electrics - 12N/12S for the towing electrical circuit, supplied as a wiring harness terminating in twin 7-pin sockets. The 12N (normal) so...
View full detailsGearbox Guard - steel transmission guard within the underbody protection group. It bolts beneath the gearbox and transfer box, spanning the transm...
View full detailsRear Lamp Guards for the rear lighting assembly, supplied as a pair covering the left- and right-hand rear lamp units. Moulded in black plastic, t...
View full detailsRoof Rack Front Spoiler - Without Light Recesses - wind deflector that mounts across the leading edge of the TF972 tubular roof rack. The spoiler ...
View full detailsTow Bar Electrics - the 13-pin electrical interface between the vehicle body wiring and the trailer socket within the tow bar installation. The as...
View full detailsHeavy Duty Storage Box - Medium - 97 litre load-carrying box for equipment stowage, used in the load area or mounted externally on a roof rack. Mo...
View full detailsWing Top Protectors - chequer plate covers for the upper surfaces of the front wings, within the exterior body protection assembly group. The wing...
View full detailsWing top chequer plate protectors, supplied as a pair in five-bar aluminium chequer plate with a black finish. The panels cover the upper surface ...
View full detailsRaised Air Intake relocating the engine air intake from the wing-level inlet to an elevated position alongside the A-pillar, drawing air from above...
View full detailsRecovery Kit - a set of winching and recovery accessories supplied together in a carry bag, covering the rigging needed for a basic vehicle recover...
View full detailsLED Driving Cube MX85-SP - Twin Pack
LED Driving Cube MX85-WD - Twin Pack
Waterproof seat cover set for the front seats and the rear bench, finished in black. The covers are shaped to the standard seat frames and fit ove...
View full detailsFuel tank guard in 6mm aluminium, part of the underbody protection group. It takes the place of the thin pressed-steel tank cradle beneath the rea...
View full detailsRetro-style headlamp bezels with slotted vents, supplied as a vehicle set. The bezels fit over the headlamp apertures in the front panel, framing t...
View full detailsRear Access Ladder giving step access from the rear bumper up to the roof rack platform. Constructed from 25 mm black powder-coated steel tube wit...
View full detailsWing top chequer plate protectors, supplied as a pair in five-bar aluminium chequer plate with a silver anodised finish. The panels cover the uppe...
View full detailsSpare Wheel Cover finished in matt black with silver detailing. Fits over the externally mounted spare wheel to shield the tyre and rim from ultra...
View full detailsFuel Tank Guard in 5 mm steel - underbody protection panel for the fuel tank. The fuel tank sits low under the rear overhang, one of the most expo...
View full detailsSide Sill Protectors - chequer plate covers for the body sills below the doors, within the exterior body protection assembly group. The sills take...
View full detailsHD Rear Bumper Corners - 90 + Swc
Fixed Side Steps - a pair of body-mounted running boards fitted along the lower sill line to ease access to the cabin and to shield the sill from s...
View full detailsSteering guard in zinc-plated steel, part of the underbody protection group. It bolts beneath the front of the chassis to shield the steering box,...
View full detailsWilderness Compact 8 Side LED Lights
Extended Wheel Arch Set - a set of four oversize wheel arch extensions for three-door bodywork, standing 2in (50 mm) wider than the standard arches...
View full detailsAdjustable Tow Hitch - height-adjustable tow hitch for the rear towing installation. The hitch mounts to the rear towing bracket and allows the co...
View full detailsBonnet Chequer Plate - protective panel for the bonnet centre section, shielding the aluminium bonnet skin from scuffing by loads, footwear and bra...
View full detailsSpare Wheel Delete Door Panel in Pangea Green - cosmetic cover panel for the rear door, part of the rear door / tailgate trim assembly. Fits into ...
View full detailsHard Case Awning Room for the 2.5m x 2.5m hard case LED awning, enclosing the sides of the deployed canopy to form a sheltered room. The room is s...
View full detailsExtended Wheel Arch Set - a set of four oversize wheel arch extensions for five-door bodywork, standing 2in (50 mm) wider than the standard arches....
View full detailsSpare Wheel Delete Door Panel in Tasman Blue - cosmetic cover panel for the rear door, part of the rear door / tailgate trim assembly. Fits into t...
View full detailsExpedition Awning - vehicle-mounted side awning measuring 2.0m along the mounting face, with the canopy extending 2.1m away from the vehicle. The ...
View full detailsSkeleton Straight Front Bumper - a non-winch front bumper forming part of the front-end protection assembly, bolting to the standard chassis front ...
View full detailsHalo & Bar LED Light Kit - 73mm with 95mm Fog and Reverse - Coloured - a complete front and rear exterior lighting kit with coloured lenses, bu...
View full detailsSpare Wheel Delete Door Panel in Gondwana Stone - cosmetic cover panel for the rear door, part of the rear door / tailgate trim assembly. Fits int...
View full detailsWheel Arch Kit - Standard is a set of replacement exterior wheel arch extensions in the standard width profile, finished in gloss black. The arche...
View full detailsMulti Light Kit with Controller - a wireless lighting control module supplied with a set of colour-changing accent lights, forming a self-contained...
View full detailsAwning Room Enclosure with three walls, sized to fit a 2500 x 2500 mm vehicle-mounted awning. It attaches beneath the awning canopy to enclose the ...
View full detailsTvx Grille Gloss Black - Defender
HID Spotlight - 8 inch - a pair of 8 inch diameter driving lamps using 35 W xenon high-intensity discharge technology. HID output is up to three t...
View full detailsHalo & Bar LED Complete Light Kit - 95mm - Coloured - a complete front and rear exterior lighting kit with coloured lenses, in which every lamp...
View full detailsTow Bar Kit - fixed swan neck towing bracket for the rear chassis mounting points. The swan neck is a one-piece curved neck and tow ball assembly ...
View full detailsSkeleton Steering Guard - Natural Alloy - underbody protection plate covering the steering box and track rod, mounted to the chassis front cross-me...
View full detailsRear Window and Quarter Light Guard Set protecting the rear door glass and the rear quarter lights, finished in black. The set comprises an intern...
View full detailsPedal Cover Set is a set of aluminium covers that fit over the standard foot pedals to provide a durable metal tread face with an improved grip sur...
View full detailsHalo & Bar LED Light Kit - 73mm with 95mm Fog and Reverse - Smoked - a complete front and rear exterior lighting kit with smoked lenses, built ...
View full detailsExpedition Awning - compact vehicle-mounted side awning, the narrowest in the expedition awning range, with the canopy extending 2.1m away from the...
View full detailsFixed Side Steps - a pair of body-side access steps that mount to the lower body at the sill. The steps provide a fixed, non-retractable stepping ...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026