for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Tow Ball Security Plate - an anti-theft plate for vehicles fitted with a removable swan-neck tow ball. The plate is cut from 8mm stainless steel a...
View full detailsTrailer Coupling Wiring Harness - the vehicle-side loom of the towing electrical installation, running from the rear body harness to the trailer so...
View full detailsTow Bracket Kit
Lockable Tow Ball Handle Assembly for the detachable tow ball system. It locks the removable tow ball into the receiver to secure it against remov...
View full detailsStainless Steel Door Thresher D
Front Bumper Protection Moulding - exterior trim component of the front bumper assembly. The moulding fits to the front bumper cover and protects ...
View full detailsAirline Kit
Chequer Plate - Load Area Floor - 2mm aluminium chequer plate panel for the rear load area floor, part of the load space protection group. The loa...
View full detailsMoulding - Front Wheel Arch
Sill Protectors - a pair of 3mm aluminium chequer plate panels covering the outer sill area below the door openings, part of the exterior body prot...
View full detailsWheel Arch Chequer Plate - front, left-hand. A Safari-style chequered aluminium protection plate fitted over the front wheel arch. The plate cover...
View full detailsDoor Sill Moulding is an exterior body moulding that runs along the lower edge of the door at the sill line. Part of the exterior body trim group,...
View full detailsTrailer Coupling Wiring is the vehicle-side electrical harness of the towing electrics installation, connecting the body harness to the 13-pin trai...
View full detailsSill Protectors - a pair of 3mm aluminium chequer plate panels covering the outer sill area below the door openings, part of the exterior body prot...
View full detailsFront Wing Protector - Rear Section, part of the exterior body protection panel set for the front wings. The panel covers the rear portion of the ...
View full detailsWheel Arch Protectors - Set of 4 - exterior body protection mouldings fitted over the wheel arch lips, shielding the painted arch edges from stone ...
View full detailsKey Fob Cover Kit replaces the outer casing and rubber button pad of the smart key remote handset. It supplies a new shell and button membrane for...
View full detailsFloor Mats - a set of tailored contour mats shaped to follow the footwell profile of the interior. The mats lay over the original carpet to protec...
View full detailsMud Flap for the rear wheel arch, right-hand side. Fitted behind the rear wheel at the lower body, the flap deflects road spray, mud and stone deb...
View full detailsMudflap for the front of the vehicle, moulded in black with a white logo. It mounts behind the front wheel to catch water, mud and road debris thr...
View full detailsHook - Towing - Rear
Wheel Arch Chequer Plate - front, right-hand. A Safari-style chequered aluminium protection plate fitted over the front wheel arch. The plate cove...
View full detailsProtective Strip Kit is a set of four black protective mouldings for the body sides. The strips mount along the lower door and body panels to guar...
View full detailsKey Fob Cover Kit is a replacement outer cover for the remote smart key. The kit contains the upper and lower cover halves with the function butto...
View full detailsMudflap for the exterior bodywork. The mudflap mounts behind the wheel to deflect road spray, mud and debris thrown up by the tyre, protecting the...
View full detailsDecal - Name Plate - front bonnet name decal, part of the exterior body trim and badging. It carries the raised model-name lettering applied to th...
View full detailsRoof Rails - a pair of longitudinal roof rails that run fore-and-aft along the roof, providing the mounting base for cross bars and roof-mounted lo...
View full detailsNumber Plate Bracket mounts within the radiator grille and front bumper assembly, providing the fixing point for the front licence plate. It locat...
View full detailsCubby Box - a centre console storage box that mounts on the transmission tunnel between the front seats. The body is finished in grey with a vinyl...
View full detailsName Plate - front wing "V8" lettering decal, part of the exterior body trim and badging. The raised grey lettering is applied to the lower front ...
View full detailsSingle Roof Bar - a roof-mounted cross bar that provides a load-carrying and mounting point across the vehicle roof. The bar weighs 4 kg and carri...
View full detailsAdhesive Tape is a self-adhesive exterior decal tape, light grey. It is applied to the body as exterior lettering or decal trim.
Loadspace Mat - ribbed rubber drop-in mat for the rear floor of the 7-seat configuration. Protects the rear load floor from dirt, moisture and wea...
View full detailsLogo Tape - self-adhesive exterior logo decal, 23.5 cm in length. Applied to the body panel as a finished lettering transfer. Supplied as a single...
View full detailsFiller Plug is a red anodised aluminium replacement filler plug for the radiator and thermostat housing filler points. Machined from anodised alum...
View full detailsSide Step Tube in stainless steel, forming part of the exterior side-protection and cabin-access assembly. Mounted along the lower body side, the ...
View full detailsMud Flap Stay is the steel support bracket that braces a rear mud flap and holds it in position behind the wheel. It fixes the mud flap to the bod...
View full detailsFloor Mat - Rear is a moulded rubber floor mat for the rear of the vehicle. It protects the rear floor, providing a hard-wearing, washable surface.
Compartment Load Liner - a semi-rigid protective liner for the loadspace floor. It sits over the boot floor with raised sides that contain spills ...
View full detailsBody Side Sill Finisher is an exterior trim moulding that runs along the lower body side, covering the sill (rocker panel) between the front and re...
View full detailsLoadspace Mat - moulded rubber luggage-compartment liner. Fits the boot floor to protect the load area from dirt, moisture and wear. The rubber co...
View full detailsBody Side Sill Finisher with Rear Mudflap - the lower bodyside sill trim incorporating the rear mudflap, fitted to the left-hand side. This finish...
View full detailsTow Hitch for the towing system, rated to a maximum gross towing weight of 3,500 kg. The hitch bolts to the tow bar and carries the tow ball, prov...
View full detailsDecal - TDi - a self-adhesive "TDi" engine decal for the front wing, in black. The decal reproduces the original "TDi" wing marking that identifie...
View full detailsDriving Light Wiring Harness - a 12V wiring loom for connecting auxiliary driving lamps to the vehicle's electrical supply.
Grille - Matt Black
Body Side Sill Finisher with Rear Mudflap - the lower bodyside sill trim incorporating the rear mudflap, fitted to the right-hand side. This finis...
View full detailsRear Step Tread - Rubber - Tyre Pattern is a replacement rubber top for the folding rear step, moulded with a tyre-tread pattern for grip. It fits...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026