for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Wheel Centre Cap - set of four alloy wheel centre caps in Titan Silver. The centre cap clips into the hub bore of an alloy wheel, covering the hub...
View full detailsWheel Centre Cap is the press-fit cap that covers the central hub bore of a factory alloy road wheel, concealing the hub and wheel fixing. Finishe...
View full detailsWheel Centre Cap for the road wheel, fitting into the centre bore of the rim to cover the hub. Finished in silver with a black logo. The cap conce...
View full detailsPan Head Screw, M8 x 25mm. Metric pan head screw for use across Land Rover body, chassis, and accessory fitment applications.
Bonnet Chequer Plate in black for the Land Rover Defender (2007-2016, Puma). This 3mm aluminium chequer plate fits the restyled Puma-era bonnet an...
View full detailsSteering Guard - 8mm Alloy - LHD for underbody protection of the steering linkage assembly. Constructed from 8mm laser-cut alloy plate with a tape...
View full detailsRoof Access Ladder provides access to the roof and roof rack. It mounts to the rear bodywork and gives a secure step up for loading, unloading and...
View full detailsTow Ball Spacer Block Kit fits between the tow ball and the tow bracket to raise the tow ball by 1.5", increasing clearance at the rear of the vehi...
View full detailsheavy duty spring front RR/disco pair, like DA4201 and TF014.
Tow hitch 110 TD5 adjustable
Safari Door - the rear load (tail) door of the body assembly, supplied unglazed and without a spare-wheel carrier. It hinges on the rear body to c...
View full detailsAutolite Work Lamp - Square - 55W
Rear Light Guard - Single - Black is a steel mesh protective guard for a single rear lamp. It bolts over the rear lamp lens to shield it from impa...
View full detailsSide Steps - a matched left- and right-hand pair of fixed tubular side runners that bolt to the sill and chassis mounting points, forming a continu...
View full detailsSide Steps - a matched left- and right-hand pair of tubular side runners that bolt to the sill and chassis mounting points, forming a continuous no...
View full detailsTow Hook Protective Cap is a cover for the towing eye aperture in the bumper. It closes off the tow hook mounting point when not in use, keeping o...
View full detailsWing Top Protectors are 3mm chequer plate aluminium panels that fit over the top surface of the front wings. Fitted over the wing top sheet metal,...
View full detailsUpgrade your Land Rover Series and Military 1-Ton models with this adjustable tow hitch kit, designed for heavy-duty towing applications. This mili...
View full detailsRock & Tree Sliders mount along the sills to protect the lower bodywork and chassis from rocks and obstacles during off-road use, and give a be...
View full detailsFitment: All Models Except TD5
Wing Protector - Long - 3mm Aluminium for the Defender front wings. Aluminium chequer-plate protector that mounts over the front wing tops of the ...
View full detailsFolding Side Step - Series
Rope Hook
Steering Damper - 4-Stage Adjustable for Land Rover Defender 90, 110, and 130. This hydraulic steering damper mounts between the axle and chassis ...
View full detailsAuxiliary Lamps - Spoiler for the Range Rover Classic, mounted in the front spoiler. This pair of 55W auxiliary lamps supplements the main headligh...
View full detailsRoof Access Ladder in a hot-dip galvanised steel finish, providing safe access to a roof rack. This is a non-drill (bolt-on) type ladder that moun...
View full detailsSliding Window Pair - clear glass side windows within the body glazing, supplied as a pair. Each framed unit carries horizontally sliding clear gl...
View full detailsSide Steps - a matched left- and right-hand pair of tubular side runners that bolt to the sill and chassis mounting points, forming a continuous no...
View full detailsAdjustable Tow Bar Kit with quick-disconnect coupling for the rear towing system. The height-adjustable drop plate lets the tow ball height be set...
View full detailsSteering Damper mounts in the front steering linkage to absorb kickback and reduce shimmy transmitted from the front axle to the steering wheel. T...
View full detailsAll-Terrain Suspension Kit - 2-Inch Lift, Medium Load for Defender 110 and 130, by Terrafirma. This spring and shock absorber upgrade raises the ve...
View full detailsSuspension Kit providing 2 inches of lift in a medium load configuration, combining rated coil springs with All Terrain shock absorbers. Designed ...
View full detailsShock Absorber for the rear coil spring suspension system. This big-bore unit is designed for heavily laden and expedition applications where sust...
View full detailsRear Coil Spring Pair - Medium Load, +2" Lift (Terrafirma). These rear coil springs raise ride height by approximately 2 inches over standard and ...
View full detailsTowbar Electrics Kit (13-Pin) providing the trailer electrical connection for towing. The kit adds a European-style 13-pin socket with a dedicated...
View full detailsBolt - mounting bolt for the tow ball drop plate within the towing equipment, clamping the drop plate and tow ball to the tow bar. Also supplied a...
View full detailsFits Land Rover Defender (1987-2016) Wolf style design for a tough, military-inspired look Sold as a pair for full headlamp protection
The Safari Raised Air Intake Snorkel for the Defender TD5/TD4 (1999 Onwards) is engineered for off-road enthusiasts seeking optimal engine protecti...
View full detailsWaterproof Front Seat Covers for Defender (2007-2016, Puma), in black. This pair of seat covers is designed for the front seats of the Puma-era De...
View full detailsSteering Wheel Boss is a hub adapter that mounts a replacement steering wheel to the steering column. It engages a 36-spline column shaft and form...
View full detailsWipac 73mm clear LED light kit with 95mm fog and reverse lamps replaces the standard 73mm exterior lamps on a Land Rover Defender with LED units be...
View full detailsparts catalogue SII & SIIa orginal (1968)
Lower front vent grille in stainless steel, part of the front panel and grille assembly. It mounts into the lower vent opening below the radiator ...
View full detailsSpare Wheel Cover Sticker - a self-adhesive vinyl decal for the rear-mounted spare wheel cover, carrying a Union Jack design rendered in monochrome...
View full detailsSpare Wheel Cover Sticker - a self-adhesive vinyl decal for the rear-mounted spare wheel cover, carrying a Union Jack design. The decal is applied...
View full detailsMat - Front Floor
Waterproof Seat Cover Set for the front seats, supplied as a pair. Tailored to fit over the standard front seats and protect the original upholste...
View full detailsFront Mud Flap Kit for the front wheel arches. Mounted behind the front wheels, these mud flaps deflect road spray, mud and stone chips thrown up ...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026