for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Rear Access Ladder - a bolt-on ladder for reaching the roof and any roof rack or roof tent, mounting to the rear of the body on the left-hand side....
View full detailsChequer Plate Wing Tops fitted over the top surface of the front wings, providing a protective and decorative aluminium covering for the wing panel...
View full detailsFixed Side Steps - body-mounted running boards in the exterior styling and access group. The steps give an intermediate foothold for entry to and ...
View full detailsMudflap
Front Floor Mats - moulded rubber mats supplied as a pair for the driver and passenger footwells. The mats are shaped to the contours of the footw...
View full detailsMud Flap Set - Rear shields the rear bodywork and lower panels from stones, mud and road debris thrown up by the rear wheels. Supplied as a matche...
View full detailsRoof Rack Side Rail Gasket for the front roof rack side rail mounting, left-hand lower position. This gasket seats between the front roof rack sid...
View full detailsRoof Rack Side Rail Gasket for the front roof rack side rail mounting, left-hand upper position. This gasket seats between the front roof rack sid...
View full detailsRoof Rack Side Rail Gasket for the rear roof rack side rail mounting, right-hand side. This gasket seats between the rear roof rack side rail and ...
View full detailsRoof Rack Side Rail Gasket for the front roof rack side rail mounting, right-hand upper position. This gasket seats between the front roof rack si...
View full detailsRoof Rack Side Rail Gasket - the rear sealing gasket for the roof rack side rail, part of the roof rack mounting assembly. It sits between the rea...
View full detailsRoof Rack Side Rail Gasket for the front roof rack side rail mounting, right-hand lower position. This gasket seats between the front roof rack si...
View full detailsRaised Air Intake Snorkel - relocates the engine air intake from the wing to roof level, so induction air is drawn from above the bonnet line. Sup...
View full detailsTrack Rod Guard is a bolt-on guard that shields the steering track rod within the front steering linkage. The track rod runs low and exposed acros...
View full detailsSnorkel Mount is a 3" stainless steel raised air intake that routes engine induction air to a high mounting point, protecting the engine during dee...
View full detailsCastor Correction Wedges - a pair of tapered wedges fitted between the front axle and the leaf springs to restore the castor and differential pin a...
View full detailsTow Ball Step is a rear access step that locates over the tow ball, providing two tread levels to make reaching the rear door, load area or roof ea...
View full detailsRock Sliders with Tree Bars - Heavy Duty - chassis-mounted side protection for the sills and lower body, supplied as a pair. This heavy-duty versi...
View full detailsMud Flap Bracket for the left-hand rear position on High Capacity Pick Up (HCPU) bodywork. Part of the exterior mud flap mounting. The HCPU rear b...
View full detailsFinisher Clip - a retaining clip for exterior body finishers and mouldings. The clip secures a trim finisher or moulding to the body panel, engagi...
View full detailsHook & Loop Fastening Strap for securing and bundling loose items within the vehicle interior, cargo area, or workshop. The strap wraps around ...
View full detailsSnorkel Head is the 3" ram-air intake head that fits to the top of a raised air intake tube, forming the forward-facing scoop that feeds cool, clea...
View full detailsFront Shock Absorber Turret: the tubular mounting tower that locates the upper end of the front damper. It bolts to the chassis and provides the t...
View full detailsSpare Wheel Carrier Hinge Bush - a pair of nylon bushes for the swing-away spare wheel carrier (DA2232 / GA2232). The bushes line the hinge pivot ...
View full detailsSteering Boss Adaptor - a mounting adaptor between the steering column boss and an aftermarket steering wheel. It adapts the fixing pattern of the...
View full detailsMud Flap Bracket for the left-hand rear position on High Capacity Pick Up (HCPU) bodywork. Part of the exterior mud flap mounting. The HCPU rear b...
View full detailsRear Mudflap Mounting Angle, the angled bracket that secures a rear mudflap to the underbody. It positions and supports the mudflap behind the rea...
View full detailsSpare Wheel Carrier Spacer in the rear-mounted spare wheel carrier assembly. This spacer fits within the spare wheel carrier mounting to maintain ...
View full detailsWinch Accessory Kit supplied in a heavy-duty black nylon storage bag with internal compartments, for off-road vehicle recovery. The kit gathers th...
View full detailsWinch Cable Damper is a safety accessory placed over the winch line during vehicle recovery operations. By adding weight to the cable or synthetic ...
View full detailsWireless Remote Control replacement transmitter for the Terrafirma winch wireless control system. Provides hands-free winch operation via radio sig...
View full detailsRaised Air Intake relocating the engine air intake to an elevated position at the A-pillar, drawing clean air from above the standard bonnet-level ...
View full detailsSwing Away Spare Wheel Carrier for the Discovery 3 and 4, providing an external spare wheel mounting position at the rear of the vehicle. The carr...
View full detailsNutsert, M8 blind rivet nut for use where a permanent threaded insert is required and access to the reverse face of the panel or bracket is not pos...
View full detailsSide Protectors - a pair of body-side protection panels with a chequer-plate top surface. Mount along the lower body sides to shield the sills and...
View full detailsFloor Mat for the second-row (rear) floor area. It is shaped to fit the rear passenger footwell and protects the vehicle's carpet from mud, moistur...
View full detailsHeadlamp Light Guards for the Discovery 2 facelift, supplied as a matched pair covering both front headlamp positions. These black plastic guards ...
View full detailsXS Vent Set Silver with Black Mesh (Pair)
Door Hinge Kit for the front doors - stainless steel hinges that mount each front door to the body hinge pillar, replacing the original hinges. Th...
View full detailsElectronic Fan Conversion Kit for the cooling system. It replaces the engine-driven viscous fan with a thermostatically controlled electric suction...
View full detailsSpare Wheel Door Bracket - right-hand - for the Defender rear door spare wheel carrier. This pressed steel strengthening bracket reinforces the re...
View full detailsSpare Wheel Door Bracket - left-hand - for the Defender rear door spare wheel carrier. This pressed steel strengthening bracket reinforces the rea...
View full detailsSpare Wheel Cover - a moulded vinyl cover that fits over an externally-mounted 16" spare wheel to shield the tyre and rim from dirt, moisture and U...
View full detailsSpare Wheel Cover for Discovery 1 and Discovery 2, sized to fit a 255mm-wide tyre on a 16- or 18-inch wheel. The cover has a rigid backing panel a...
View full detailsLED Light Bar - a 126W auxiliary LED lamp providing supplementary forward lighting. Measuring approximately 560mm long, the bar carries a row of h...
View full detailsAir Intake Grille for the right-hand front wing, covering the air intake aperture in the wing top. Finished in black with a silver mesh insert, in ...
View full detailsRear Inward-Facing Seat in black trim. This individual inward-facing seat mounts in the load area to provide additional occasional seating. Inward...
View full detailsRear Bumperettes - a pair of tubular bumperettes that bolt to the rear crossmember to protect the rear corners of the body and the rear lamps from ...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026