Land Rover Coil Springs

Spring Retainer Ring for the front coil spring on the suspension. The ring secures the coil spring to its seat, holding the spring captive so that...

4WD High Gear Selector Spring for the transfer box four-wheel-drive selector mechanism. The spring acts on the high-range four-wheel-drive selecto...

Reverse Gear Selector Detent Spring for the manual gearbox selector mechanism. The spring loads the detent ball against the reverse selector shaft...

Spring Retainer - rear inner-top retainer in the coil spring and shock absorber mounting. It locates and holds the top of the rear coil spring at ...

Spring Retainer secures the upper outer mounting of the rear coil spring and damper within the rear suspension assembly. It clamps the top of the ...

Spring plate

Coil Spring for the right-hand side of the coil-sprung suspension, identified by its red/blue paint marking which denotes the spring's load rating....

Spring bonnet pull cable return

Lower Spring Seat locates the base of the coil spring in the suspension. It provides the lower bearing surface on which the road spring rests, pos...

bar torsion LH

Front Coil Spring - Off-Side (White) for the Defender 110 front suspension. This road spring fits the off-side (driver's side on RHD vehicles) fro...

Spring Seat for the front coil spring suspension. It forms the lower seat that locates and supports the base of the front coil spring on the axle, ...

Coil Spring for the left-hand (passenger) side road spring position. This road coil spring seats between the chassis spring seat and the axle, sup...

In/out member spring

Clutch Pedal Torsion Spring is a return spring for the clutch pedal, fitted within the pedal box assembly on manual transmission vehicles. It prov...

Spring Retaining Plate in the rear suspension, securing the upper end of the rear coil spring. It locates and clamps the top of the coil spring ag...

Spring Retainer - Rear is the rear coil spring seat retainer plate in the rear suspension. It locates and holds the rear coil spring at its seat, ...

Front Coil Spring - Medium Duty, +2" Lift (Terrafirma). These front coil springs raise ride height by approximately 2 inches over standard and are...

Front Coil Spring - Heavy Load, Standard Height (Terrafirma). These front coil springs are rated for heavy load while retaining the standard ride ...

Spring Retaining Plate Front coil spring retaining plate that clamps over the top of the spring at its seat, holding the spring captive so it canno...

Spring Seat is the lower seat for the rear coil spring, forming the located surface that the base of the spring sits on. It positions and retains ...

Dislocation Cone - Rear Coil Spring for the rear coil spring seat assembly. When long-travel shock absorbers or lowered top-mount shock relocators...

Dislocation Cone for the rear coil-sprung suspension, supplied as a pair. The cones fit to the axle spring seat beneath each rear coil spring. Und...

Rear Coil Spring Spacers, +2" - a pair of suspension spacers for the rear coil springs that raise ride height by approximately 2 inches (50 mm). E...

Coil Spring - Front - +2" Light Duty is a front suspension coil spring providing approximately 50mm (2 inches) of lift above the standard ride heig...

Spring Retaining Plate - Rear for the rear coil spring seating assembly on Defender 110 and 130. Coil springs can become dislodged from their axle...

Rear Coil Spring for the rear suspension, fitting between the axle and the chassis spring seat to support the vehicle and absorb road inputs. This...

Lower Spring Seat forms the mounting platform for the base of the coil spring on the axle within the suspension. It locates the foot of the spring...

Spring pin

Gear Lever Anti-Rattle Plunger Spring The lower plunger spring for the gear lever in the gearchange mechanism of the 5-speed manual gearbox (LT77 a...

Road Spring - rear coil spring for vehicles equipped with self-levelling suspension. The spring locates in the rear suspension and works in conjun...

Coil Spring for the rear suspension on vehicles equipped with self-levelling suspension. This is the driver-side road spring, identified by its blu...

Return Spring for Series hydraulic actuator and throttle control assemblies. This spring serves as a return spring in the hydraulic actuator assem...

Road spring 110 front passenger Yellow/Yellow

Heavy Duty spring Range Rover rear +0mm

Front Coil Spring - front suspension coil spring, seated between the axle spring pad and the chassis spring turret to support the vehicle and contr...

Rear Coil Spring Pair - Medium Load, +2" Lift (Terrafirma). These rear coil springs raise ride height by approximately 2 inches over standard and ...

Rear Spring Dowel - a locating dowel that positions the rear road spring on its seat. The dowel engages a corresponding hole in the base of the sp...

Coil Spring for the front suspension, left-hand (passenger) side road spring position. This road coil spring seats between the chassis spring seat...

Front Road Coil Spring for the front suspension, right-hand side. This coil spring supports the front of the vehicle at its road ride height, worki...

Torsion Spring for the gear lever mechanism of the LT77 and R380 five-speed manual gearboxes. Fitted within the gearchange housing, it supplies th...

Spring Retaining Plate for the front coil spring suspension. The plate seats the upper end of the front coil spring against the chassis spring seat...

heavy duty spring front RR/disco pair, like DA4201 and TF014.

Spring Plate that retains the soft top (tilt) hood frame. Works with the tilt stud to clamp the canopy in place. Used with stud AFU2503 and ring A...

Coil Springs are a matched front pair that raise ride height by 2 inches (50 mm) above standard, forming part of the coil-sprung front suspension. ...

Fitment: 90/110 to 1998 Not TD5

Road Spring SWB Rear 11L

Suspension Kit providing 2 inches of lift in a medium load configuration, combining rated coil springs with extended-travel Pro Sport shock absorbe...