Land Rover Coil Springs

Reverse Gear Selector Detent Spring for the manual gearbox selector mechanism. The spring loads the detent ball against the reverse selector shaft...

In/out member spring

Spring Retaining Plate in the rear suspension, securing the upper end of the rear coil spring. It locates and clamps the top of the coil spring ag...

Front Coil Spring - Heavy Load, Standard Height (Terrafirma). These front coil springs are rated for heavy load while retaining the standard ride ...

Spring Seat is the lower seat for the rear coil spring, forming the located surface that the base of the spring sits on. It positions and retains ...

Rear Coil Spring Spacers, +2" - a pair of suspension spacers for the rear coil springs that raise ride height by approximately 2 inches (50 mm). E...

Coil Spring - Front - +2" Light Duty is a front suspension coil spring providing approximately 50mm (2 inches) of lift above the standard ride heig...

Spring Retaining Plate - Rear for the rear coil spring seating assembly on Defender 110 and 130. Coil springs can become dislodged from their axle...

Spring pin

Return Spring for Series hydraulic actuator and throttle control assemblies. This spring serves as a return spring in the hydraulic actuator assem...

Rear Spring Dowel - a locating dowel that positions the rear road spring on its seat. The dowel engages a corresponding hole in the base of the sp...

heavy duty spring front RR/disco pair, like DA4201 and TF014.

Spring Plate that retains the soft top (tilt) hood frame. Works with the tilt stud to clamp the canopy in place. Used with stud AFU2503 and ring A...

Coil Springs are a matched front pair that raise ride height by 2 inches (50 mm) above standard, forming part of the coil-sprung front suspension. ...

Fitment: 90/110 to 1998 Not TD5

Road Spring SWB Rear 11L

Suspension Kit providing 2 inches of lift in a medium load configuration, combining rated coil springs with extended-travel Pro Sport shock absorbe...

Front Spring Spacers fit between the front axle and the base of the front coil spring to raise the spring mounting point. The spacers are 50mm (2 ...

Suspension Kit 110/130 Medium Load Terra Firma

Suspension Kit providing 2 inches of lift in a heavy load configuration, combining rated coil springs with All Terrain shock absorbers. The heavy ...

All Terrain Light Load Suspension Kit 90/D1/RRC TERRA FIRMA

Rear Coil Spring for the Defender 110 and 130, rated to standard height and standard load specification. The spring mounts between the rear axle s...

Coil Spring - Rear - Standard Height & Load is a direct-replacement rear suspension coil spring maintaining the standard ride height and load r...

Coil Spring - Front - Standard Height & Load is a direct-replacement front suspension coil spring maintaining the standard ride height and load...

Rear Coil Spring - Heavy Duty, +2" Lift A rear suspension coil spring from the Terrafirma range, seating between the axle and the chassis spring s...

All-Terrain Suspension Kit - 2-Inch Lift, Medium Load for Defender 110 and 130, by Terrafirma. This spring and shock absorber upgrade raises the ve...

Rear Coil Spring - Heavy Load for the Defender 90, rated for heavy load applications at standard ride height. The spring installs in the rear spri...

Terrafirma medium load rear springs (pair) 90/D1/RRC

Rear coil spring seat for the chassis, the upper seat that locates and supports the top of the rear coil spring at the chassis outrigger. The seat...

Rear Dislocation Cone is a suspension component for the rear coil springs, fitted at the spring seat to guide a spring that unseats at full droop b...

Coil Springs - Front, 1" lowered, supplied as a pair. Standard-rate springs for the front coil suspension, reducing front ride height by 1". They ...

Rear Relocation Cones - Axle - Pair

Rear Relocation Cones - Axle - Pair

Front Coil Springs - standard ride height, standard load rating, supplied as a pair. Part of the front coil spring suspension. Each spring seats b...

Coil Springs - Rear, 1" lowered, supplied as a pair, for the short-wheelbase rear coil suspension. Standard-rate springs that reduce rear ride hei...

Spring Pin for the LT95 four-speed gearbox, used in the gear selector mechanism. The hollow, sprung roll pin locates and retains selector componen...

Leaf Spring Heavy Duty

Rear Leaf Spring - heavy-duty rear leaf spring for the passenger side, built with eight leaves for increased load capacity. Locates the rear axle ...

All Terrain Suspension Kit - standard ride height, standard load. A matched set of shock absorbers and coil springs covering both axles, grouped un...

Suspension Kit - Heavy Load - +2" Lift is a matched front and rear spring and damper set supplied as a single package, pairing +2" (50 mm) lifted c...

Suspension Kit - Heavy Load - +2" Lift is a matched front and rear spring and damper set supplied as a single package, pairing +2" (50 mm) lifted c...

Suspension Kit - Medium Load - +2" Lift is a matched front and rear spring and damper set supplied as a single package, pairing +2" (50 mm) lifted ...

Suspension Lift Kit supplying the complete front and rear coil spring and shock absorber set in one package, raising ride height by approximately 2...

Susp. Kit - Pro Sport - Heavy Load

Susp. Kit - All Terrain - Heavy Load

Susp. Kit - Pro Sport - Heavy Load

Susp. Kit - All Terrain - Heavy Load

Susp. Kit - All Terrain - Standard. Height