Land Rover Discovery Parts

Bolt Hex-head fastener, M10 x 100mm, used as a chassis and crossmember fixing. Commonly fitted to secure the gearbox crossmember, and used across ...

Hex Nut used in the clutch master cylinder and pipe assembly. This standard hex nut secures hydraulic pipe fittings or mounting hardware within th...

Cylinder Head Bolt - a 7/16" UNC long-type bolt for the Rover V8, part of the cylinder head fixings. This is the longest of the head bolts used on...

Exhaust Valve seats in the cylinder head of the 3.5L V8 petrol engine. It controls the exhaust gas leaving the combustion chamber. Head diameter 3...

Intake Air Valve Assembly is the rubber dust valve fitted to the base of the air cleaner housing in the engine air intake system. This one-way fla...

Hose Clip clamps a hose onto its spigot or fitting, maintaining a sealed joint under pressure.

Cross Rod End

Cranked Rear Radius Arm - links the rear axle to the chassis, controlling fore-and-aft axle location and reacting drive and braking torque. The cr...

Front Half Shaft Pair for the front axle drive, transmitting torque from the front differential out through the axle casing to the wheel hubs. The...

Pair of Heavy Duty Rear Half Shafts for 90/Discovery 1/RRC 1994 On & 110/130 2002 On

Roof Rack - a full-length roof rack in heat-treated aluminium extrusion, giving a low-profile, low-noise platform. A groove (slot) system runs alo...

Number Plate Mounting Plinth for use with a front winch bumper. Winch bumpers often have no dedicated number plate location, as the fairlead and w...

Front Shock Absorber for the front axle suspension assembly, controlling vertical wheel movement and stabilising the coil spring through compressio...

Nyloc Locknut - M6 - M6 hex nyloc (nylon insert) locknut. The nylon insert grips the bolt thread to resist loosening under vibration without requi...

Piston for the 3.5L Rover V8 petrol engine, supplied at +0.020" oversize with an 8.13:1 compression ratio. The +0.020" oversize suits a rebored bl...

Engine Mounting - bonded rubber-to-metal mount within the engine mounting assembly of 4-cylinder Land Rover engines. It locates between the engine...

Track Rod Washer from the steering linkage. It seats at the track rod fixing, spreading clamp load beneath the retaining nut to secure the joint.

Bolt securing the exhaust manifold on the Rover V8 petrol engine. A 3/8" UNC x 1 1/8" fastener used to retain the exhaust manifold to the cylinder...

Shock Absorber Boots are protective covers that fit over the shock absorber body to shield the shaft and seal from mud, grit and debris. Supplied ...

rock slider, rock guards (pair) BA 2091 Generic picture, the set supplied is BLACK coated, NOT galvanised.

Cylinder Head Bolt - a 7/16" UNC x 2-1/4" short-type bolt for the Rover V8, part of the cylinder head fixings. This is the shorter of the head bol...

Axle Spring Mount forms the lower seat for the rear coil spring, welding onto the rear axle casing to locate and retain the base of the spring. Th...

Extension Valance is a lower body panel that closes off the wheelarch and valance section of the bodywork. It bolts to the existing valance struct...

Extension Valance is a lower body panel that closes off the wheelarch and valance section of the bodywork. It bolts to the existing valance struct...

Spare Wheel Cover fits over an externally mounted spare wheel to protect the tyre and wheel from weather, road dirt and UV exposure. This is the h...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in silver, ET00 offset. The pressed-steel construction withstands o...

Locking Wheel Nut Set secures the road wheels to the hub with a keyed nut pattern that cannot be removed with a standard socket, deterring wheel th...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the modular pattern, finished in white, ET08 offset. The pressed-steel construction withstands of...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in white, ET00 offset. The pressed-steel construction withstands of...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in black, ET00 offset. The pressed-steel construction withstands of...

The Winrace T multi-spoke alloy wheel is engineered for extreme off-road conditions, making it a top choice for Baja, Dakar, and cross-country raci...

The Winrace T multi-spoke alloy wheel is engineered for extreme off-road conditions, making it a top choice for Baja, Dakar, and cross-country raci...

Valance Panel

Door Waist Seal seals the waistline of the rear side door, where the door skin meets the base of the window glass. It wipes the outer face of the ...

Mirror - Electric is an electrically-adjusted exterior door mirror. It mounts to the door and is adjusted through the electric mirror control.

Mainshaft Gear for the LT230 transfer gearbox, carrying 26 teeth. The gear is mounted on the transfer box mainshaft and forms part of the gear tra...

Alloy Wheel from the Maxtrac Blindo range, finished in anthracite. Specifications: Size: 16 x 7 inches Bolt pattern (PCD): 5 x 165 Offset (E...

Connecting Rod Assembly for the 300TDi 2.5L turbo diesel engine. The connecting rod links a piston to the crankshaft, transmitting the force of co...

Pinion Shaft is the mainshaft of the LT77 five-speed manual gearbox, running through the gear cluster to carry the driven gears and transmit drive ...

Exterior Door Mirror - Electric, Right-Hand - door-mounted exterior mirror assembly for the right-hand side. The mirror head is electrically adjus...

Roller Fairlead - zinc coated - for steel cable winches. This four-roller fairlead mounts to the front of a winch bumper and guides the steel cabl...

Synthetic Winch Rope - 10mm x 24m - 10,000 lbs for 4x4 winch recovery. This synthetic fibre winch rope is rated to 10,000 lbs (approx. 4,536 kg) b...

Vacuum Advance Unit for the ignition distributor on the 3.5L V8 petrol engine. This vacuum capsule mounts on the side of the distributor and conne...

Raised Air Intake (Snorkel) - relocates the engine air intake from the inner wing up to roof height, drawing induction air from above the bonnet li...

Adjustable Tow Hitch STC8060AB BA186

Wheel Arch and Valance Panel, front right-hand side, part of the front inner wing structure. It forms the front wheel arch and valance, carrying t...

Tow Ball & Pin Hitch Assembly for the towing system, mounting to the rear towing bracket. The assembly combines a tow ball for standard ball-c...