for Discounts / VAT
for Discounts & Correct VAT
Replacement parts for every Land Rover Discovery generation, from the Series I (1989 to 1998) through to the Discovery 5 (L462) and Discovery Sport (L550). Genuine, OEM, and aftermarket components stocked in the Netherlands for EU delivery, with fitment matched to your exact model and year. The Discovery 4 parts collection is one of our most active if you own an L319-platform vehicle.
Quick answer: The Discovery 3 (2004 to 2009) and Discovery 4 (2009 to 2016) share the L319 platform, so some components cross over between the two generations. Always confirm your production year via VIN before ordering suspension, driveline, or engine parts. If you own a Discovery Sport, it sits on a separate platform from the main Discovery line and parts are not interchangeable.
Front Brake Disc is the vented rotor that mounts to the front hub and presents the friction surface for the front brake caliper and pads. The inte...
View full detailsFront Brake Disc is the vented rotor that mounts to the front hub and presents the friction surface for the front brake caliper and pads. The inte...
View full detailsRear Lamp Guard protects the rear lamp cluster from impact and debris damage. It mounts over the rear lamp unit to shield the lens and housing aga...
View full detailsRear Lamp Guard protects the rear lamp cluster from impact and debris damage. It mounts over the rear lamp unit to shield the lens and housing aga...
View full detailsAir Suspension Compressor Inlet Pipe forms the intake path of the air suspension compressor. Part of the four-corner air suspension system, it rou...
View full detailsHeight Sensor Jumper Lead for the electronic air suspension system. This connecting lead links a ride-height sensor to the chassis wiring harness,...
View full detailsFront Bumper Wiring Harness, part of the body and bumper electrical loom. This harness routes through the front bumper and supplies both the front...
View full detailsFront Fog Lamp Wiring Harness, part of the body and bumper electrical loom. This harness routes through the front bumper and supplies the front fo...
View full detailsBattery Hold-Down Bracket The clamp that secures the battery to its tray within the engine bay. It locates over the battery and draws down against...
View full detailsHorn - High Pitch for the audible warning circuit. This is the high-tone horn, which sounds together with the low-tone horn to produce the vehicle'...
View full detailsBulb, 12V 21W, clear single-filament, for the exterior rear lamp cluster. Used in the reverse, rear fog and direction indicator (flasher) lamp pos...
View full detailsBattery Clamp Bolt for the battery hold-down assembly. The bolt secures the clamp that retains the battery in its tray, holding it firmly against ...
View full detailsXenon Bulb of D2S type for high-intensity discharge (HID) headlamp assemblies. The bulb serves the low-beam function in bi-xenon projector headlam...
View full detailsFuel Tube carries both the feed and return fuel lines between the supply system and the engine, within the fuel delivery system. The feed line sup...
View full detailsFuel Feed Pipe carries fuel from the tank to the underfloor section of the fuel supply line within the fuel delivery system. A pre-formed pipe for...
View full detailsFuel Tube delivers fuel to the auxiliary fuel-fired heater within the fuel supply system, fitted to Lion diesel applications equipped with the fuel...
View full detailsWasher - a plain washer used as a fixing component. Fitted beneath a bolt head or nut, it spreads the clamping load over a wider area and protects ...
View full detailsFog Lamp Bezel - the trim ring that surrounds the front fog lamp aperture in the front bumper, finishing the opening and locating the fog lamp with...
View full detailsHeadlamp Washer Jet - left-hand jet in the headlamp washing system. Under pressure from the washer pump the jet rises on its telescopic housing an...
View full detailsDoor Handle Cap is the exterior end cap that fits over the key-barrel end of the front left-hand (driver-side) door handle, concealing the lock acc...
View full detailsFog Lamp Bezel - the trim ring that surrounds the front fog lamp aperture in the front bumper, finishing the opening and locating the fog lamp with...
View full detailsConnecting Rod Assembly for the 3.0L V6 turbo diesel engine. The connecting rod links a piston to the crankshaft. Its small end carries the gudgeo...
View full detailsMain Bearing Set for the crankshaft of the 2.7L V6 diesel engine, supplied at 0.020 in undersize. The main bearings are the plain shell bearings t...
View full detailsDoor Handle Cap is the exterior end cap fitted to the right-hand-side door handle, finishing the handle end on a door without a lock barrel. It is...
View full detailsHeadlamp Washer Jet - right-hand jet in the headlamp washing system. Under pressure from the washer pump the jet rises on its telescopic housing a...
View full detailsWiper Arm Cap is the spindle nut cover that fits over the wiper arm pivot, concealing and protecting the retaining nut where the arm mounts to the ...
View full detailsTailgate Striker Grommet is a sealing grommet fitted at the upper striker location of the tailgate assembly. It seals the panel aperture around th...
View full detailsThermostat Housing Gasket in the engine cooling system. This 37 mm gasket seals the joint between the thermostat housing and the engine on AJ-V8 4...
View full detailsFog Lamp Bezel - the trim ring that surrounds the front fog lamp aperture in the front bumper, finishing the opening and locating the fog lamp with...
View full detailsFuel Hose forming part of the fuel return circuit on the 2.7L V6 and 3.6L V8 diesel fuel delivery system. It routes surplus fuel from the fuel fil...
View full detailsParking Distance Control Bezel - the trim bezel that locates a parking distance control sensor in the front bumper. This is the left-hand, front o...
View full detailsBezel
Main Bearing Set for the crankshaft of the 2.7L V6 diesel engine, supplied at 0.030 in undersize. The main bearings are the plain shell bearings t...
View full detailsTowing Eye Cover - an anthracite, textured-finish trim cover for the lower front bumper. It clips into the bumper to conceal the front towing-eye r...
View full detailsDoor Trim Panel - Upper forms the upper section of the interior door casing. It covers the upper door structure to provide the finished interior s...
View full detailsLoading Area Cover - retractable load cover for the rear loadspace. The roller-blind cover extends across the rear loadspace behind the seats to c...
View full detailsShield Lower Door
Shield - Water Splash
Special Rivet is a plastic scrivet (screw-type rivet) used as a securing fastener for exterior body trim and wheel-arch components. It seats and re...
View full detailsCon Rod Bearing Set - a set of connecting rod (big-end) bearing shells for the 2.7L Lion V6 turbo diesel engine, supplied in the 010 undersize. Th...
View full detailsMain Bearing Set - a set of crankshaft main bearing shells for the 2.7L Lion V6 turbo diesel engine, supplied in the 010 undersize. The shells loc...
View full detailsMain Bearing Set - a complete set of crankshaft main bearing shells for the 2.7L Lion V6 turbo diesel engine. The shells locate between the cranks...
View full detailsCon Rod Bearing Set - a complete set of connecting rod (big-end) bearing shells for the 2.7L Lion V6 turbo diesel engine. The shells locate betwee...
View full detailsHead Gasket Kit (Less Head Gasket) - a cylinder head gasket and seal set for the 2.7L Lion V6 turbo diesel engine, supplied without the cylinder he...
View full detailsRear Bumper Mounting Bracket for the centre left-hand mounting point of the rear bumper. The bracket secures the rear bumper to the vehicle body. ...
View full detailsRear Bumper Mounting Bracket for the centre right-hand mounting point of the rear bumper. The bracket secures the rear bumper to the vehicle body....
View full detailsBumper Protection Moulding for the rear bumper assembly. The moulding fits into the rear bumper to cover and finish the towing eye aperture, compl...
View full detailsWiper Arm Cap is the spindle nut cover that fits over the wiper arm pivot, concealing and protecting the retaining nut where the arm mounts to the ...
View full detailsParts for every Land Rover Discovery generation, from the original 1989 Discovery 1 to the current Discovery 5 (L462) and Discovery Sport (L550). Genuine, OEM, and aftermarket components in stock, dispatched from the EU. Select your generation below to find parts matched to your exact model.
The Land Rover Discovery family spans six distinct generations, each with its own platform, engine range, and fitment boundaries. Choosing the correct child collection ensures you find parts matched to your specific model, not just the Discovery name.
| Generation | Chassis Code | Production Years | Platform Notes |
|---|---|---|---|
| Discovery 1 parts | No L-code | 1989 to 1998 | Body-on-frame, shared chassis architecture with Range Rover Classic and 90/110 Defender. Marketed at launch as Discovery Series I. |
| Discovery 2 parts | L318 | 1998 to 2004 | Body-on-frame, extended rear overhang, coil springs all round. Marketed as Discovery Series II. |
| Discovery 3 parts | L319 | 2004 to 2009 | Independent air suspension, Integrated Body Frame architecture |
| Discovery 4 parts | L319 | 2009 to 2016 | Shares L319 platform with Discovery 3, revised engines and interior |
| Discovery 5 parts | L462 | 2017 to present | New aluminium-intensive platform, separate from all previous generations |
| Discovery Sport parts | L550 | 2014 to present | Compact crossover, JLR D8 then Premium Transverse Architecture, related to Range Rover Evoque |
The Discovery 3 and Discovery 4 share the L319 platform designation, which means some structural, driveline, and suspension components overlap between the two generations. Where cross-generation fitment applies, part listings will confirm compatibility. If you are unsure of your exact model, use the identification guidance below before ordering.
Vehicle IdentificationThe Discovery name covers vehicles built between 1989 and today across multiple distinct platforms and engine families. Ordering by model name alone is not sufficient for fitment accuracy. The correct identification method depends on the generation.
Discovery 1 (1989 to 1998): chassis number stamped on the right-hand side of the bulkhead, with a duplicate plate in the engine bay. Pre-1996 vehicles use a 17-character VIN format introduced in 1980 for export markets, while early UK-market cars may carry an 11-digit chassis number on the plate. Cross-reference with the V5C or registration document if the plate is corroded.
Discovery 2 (1998 to 2004): 17-digit VIN stamped on the right-hand bulkhead and on a plate visible through the windscreen base. The 10th character identifies the model year.
Discovery 3, 4, 5, and Discovery Sport: standard 17-digit VIN on the windscreen base plate, on the driver-side door jamb sticker, and in the V5C. The 10th character identifies model year. For Discovery 3 and Discovery 4 in particular, confirm model year via VIN before ordering suspension, engine, or driveline components, as both share the L319 platform code but have different engine variants, transmission options, and calibration specifications.
For Discovery 1 vehicles where the original documentation is missing or the chassis plate is unreadable, the British Motor Industry Heritage Trust holds factory build records and issues Heritage Certificates confirming original specification and production date. See britishmotormuseum.co.uk/archive/heritage-certificates. For Discovery 2 onward, the standard Land Rover Workshop Manual for the relevant model contains the full VIN decoding reference.
Budget Parts stocks over 3,900 parts across the full Discovery family. Coverage spans suspension and steering, braking, cooling and heating, engine and ancillaries, driveline and propshafts, electrical and sensors, chassis and body, and clutch and transmission. Each category collection below filters parts across all compatible Discovery generations. If you know the component type you need, start there. If you are working on a specific generation, start with the relevant model collection from the generations table above.
Air springs, shock absorbers, control arms, bushings, and steering components across the Discovery range.
Suspension and steering parts →Discs, pads, calipers, hoses, and hydraulic components for every Discovery generation.
Brake system parts →Radiators, thermostats, water pumps, expansion tanks, and coolant hoses for petrol and TDV6 Discoveries.
Cooling and heating parts →Propshafts, driveshafts, CV joints, and universal joints across body-on-frame and IBF Discoveries.
Drive mechanism parts →Belts, pulleys, gaskets, sensors, and engine service components for the 200Tdi, 300Tdi, Td5, TDV6, SDV6, and petrol V6/V8 Discoveries.
Engine parts →Ignition components, sensors, switches, wiring, and electrical service parts across the Discovery range.
Electrical parts →Structural repair sections, crossmembers, body panels, and chassis fasteners, including Discovery 2 rear crossmember repair sections.
Chassis and body parts →The Discovery range covers thirty-seven years of production, and parts supply differs sharply between early Series-era models and current Discovery 5 vehicles. Three quality tiers run across the catalogue, and the right choice depends on the generation, the system, and how long you intend to keep the vehicle.
Genuine parts are boxed under the Land Rover or Jaguar Land Rover part number, produced to factory specification. For Discovery 3, 4, 5, and Discovery Sport, Genuine supply remains active and is the appropriate tier for warranty-sensitive repairs, air suspension components, and turbocharger or EGR replacement on the TDV6. For Discovery 1 and Discovery 2, Genuine supply has been thinning since 2010 and is restricted to selected service items.
OEM parts come from the same suppliers Land Rover uses on the production line, sold in the supplier's own box rather than the JLR box. ZF for automatic transmissions, Bosch for ignition and injection, Pierburg for EGR coolers and vacuum pumps, Delphi for diesel injection on the TDV6, and Valeo for clutch components are all present in the Discovery parts catalogue. OEM matches Genuine specification at a lower price.
Aftermarket parts come from third-party manufacturers to a functional specification. For older Discoveries where Genuine has been discontinued, aftermarket is often the only available tier and covers the practical bulk of restoration and DIY repair work. Quality varies by brand. Each product listing on this site states the tier and, where relevant, names the OEM supplier so the choice is explicit before purchase.
EU Stock and DispatchAll Discovery parts are stocked and dispatched from the Netherlands. Orders placed before 15:00 CET on working days ship the same day. Standard delivery within the EU is two to four working days for most member states, with no customs paperwork or import VAT between EU destinations. UK orders are dispatched under standard post-Brexit customs procedures with VAT and duties handled at delivery. For workshop and trade customers placing regular orders, contact Budget Parts directly for account terms.
Technical GuidesThe guides below cover the diagnostic and replacement decisions that come up most often on Discovery vehicles. Each one is generation-specific and identifies the parts that actually fix the underlying fault, not just the symptom.
For Discovery 4 TDV6 owners experiencing reduced power or limp mode. Covers the upstream causes of DPF blockage including EGR faults and failed sensors, with guidance on the correct parts to address the root cause before replacing the filter.
Discovery 4 DPF parts guide →For Discovery 2 (L318) owners facing APK or MOT structural failure due to crossmember corrosion. Explains how internal corrosion develops, how to inspect correctly, and which repair section to select for a long-term solution.
Discovery 2 crossmember repair guide →For Discovery 3 and Discovery 4 owners with electronic parking brake warnings. Covers the common misdiagnosis of actuator failure, explains why worn brake shoes and cable resistance are typically the root cause, and identifies the parts required for a correct repair.
Discovery EPB failure guide →Identification depends on the generation. For Discovery 1 (1989 to 1998), check the chassis number stamped on the right-hand bulkhead or on the plate in the engine bay, and cross-reference with the V5C. For Discovery 2 (1998 to 2004) and all later generations, use the 17-digit VIN on the windscreen base plate or the driver-side door jamb sticker. The 10th character of the VIN identifies the model year. Discovery 1 covers 1989 to 1998, Discovery 2 covers 1998 to 2004, Discovery 3 covers 2004 to 2009, Discovery 4 covers 2009 to 2016, Discovery 5 covers 2017 to present, and the Discovery Sport has been produced since 2014. For Discovery 1 vehicles with missing documentation, the British Motor Industry Heritage Trust issues Heritage Certificates confirming factory build specification.
Partially. The Discovery 3 and Discovery 4 share the L319 platform designation, which means some structural, driveline, and suspension components are common between the two generations. However, the Discovery 4 introduced revised engine variants, updated transmission calibrations, and different electrical specifications compared to the Discovery 3. You cannot assume full cross-compatibility. Always check the part listing for confirmed fitment before ordering. Where a part fits both L319 generations, the product listing will state this. If you are uncertain, filter by your specific model within the Discovery 3 or Discovery 4 collection pages.
Genuine parts carry the Land Rover or Jaguar Land Rover part number and are manufactured to the original factory specification. OEM parts are produced by the original component supplier, often the same manufacturer that supplies the Genuine range, but sold under the supplier's own brand. In most applications, OEM quality is equivalent to Genuine at a lower price. Aftermarket parts are produced by third-party manufacturers to a functional specification and vary in quality by brand and application. For critical systems such as braking, steering, and air suspension on a Discovery 3 or Discovery 4, Genuine or OEM is the recommended tier. For wear items, fasteners, and filters, quality aftermarket parts are an appropriate and cost-effective choice.
Yes. Budget Parts stocks components for all six Discovery generations, including the Discovery 1 (1989 to 1998) and Discovery 2 (L318, 1998 to 2004). For these older generations, some Genuine Land Rover supply has been discontinued, and stock consists of OEM-equivalent and aftermarket components that meet the original specification. For the Discovery 3, Discovery 4, Discovery 5, and Discovery Sport, both Genuine and OEM supply remains active alongside aftermarket options. If a specific part is not listed, contact Budget Parts directly with your part number or chassis number for availability.
No. The Discovery Sport and the Discovery 5 are separate vehicles on distinct platforms. The Discovery Sport (L550) is a compact crossover produced from 2014 and is based on the JLR D8 architecture, later updated to the Premium Transverse Architecture shared with the Range Rover Evoque. The Discovery 5 (L462) is a full-size SUV produced from 2017 on a separate aluminium-intensive platform. The two models share no platform or major mechanical components. Parts for each model are listed in separate collections and are not interchangeable.
All Discovery parts are dispatched from the Netherlands. Orders placed before 15:00 CET on working days ship the same day. Standard delivery is two to four working days to most EU member states, with no customs paperwork or import VAT between EU destinations. UK orders ship under standard post-Brexit customs procedures with VAT and duties applied at delivery. Tracking is provided on every shipment. For trade and workshop accounts placing regular orders, contact Budget Parts directly for account terms.