Land Rover Discovery Parts

Air Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...

Coolant Temperature Sensor for the 2.2L DW12 common-rail diesel engine (Td4/SD4), mounted in the thermostat housing. The sensor is a thermistor si...

Oil Filter Adaptor for the 2.0L 16V TiVCT turbocharged Si4 petrol engine, part of the engine lubrication system. The adaptor mounts the oil filter...

Brake Pads for the rear axle, part of the rear brake discs and calipers assembly. The pads are clamped by the caliper pistons against both faces o...

Exhaust Gas Temperature Sensor monitors exhaust gas temperature within the exhaust and emissions system. Mounted on the exhaust manifold or turboc...

Primary Timing Chain Tensioner from the timing drive assembly at the front of the 2.0L four-cylinder AJ200 / AJ20P4 engine. The tensioner bears ag...

Expansion Tank is the coolant expansion and overflow reservoir in the engine cooling system. It accommodates the thermal expansion of coolant, sep...

Timing Chain - Secondary, Upper is part of the camshaft drive of the 2.0L Ingenium four-cylinder petrol engine (AJ200 / AJ20P4), including plug-in ...

Sealing Ring - the right-hand outer seal for the front axle case, part of the front driveline. It seals the point where the front driveshaft passe...

ABS Sensor for the front axle, part of the anti-lock braking and stability control system. The wheel speed sensor reads the toothed reluctor ring ...

Joint and Stub Shaft - the front-axle driveshaft joint and stub shaft assembly. Transmits drive from the front differential to the wheel hub, acco...

Gasket - Cylinder. Head Front Cover

Thermostat and Housing assembly for the 2.0L 16V TIVCT turbocharged petrol (GTDi) engine. The thermostat regulates coolant flow to bring the engine...

Engine Knock Sensor for the 2.0L 16-valve turbocharged petrol engine, mounted on the cylinder block as part of the engine management system. The s...

Washer Bottle Filler Cap - the filler cap for the windscreen washer fluid reservoir. It closes the reservoir filler neck, sealing the washer fluid...

Output Shaft Oil Seal from the external components of the ZF 9HP48 / 9HP50 nine-speed automatic transmission. The seal fits around the gearbox out...

Brake Disc for the rear axle, 300 mm diameter. The disc mounts to the rear hub and provides the friction surface for the rear brake pads.

Front Brake Pad Set - Less Springs - friction pads for the front disc brake assembly, mounted in the front caliper and clamping the front brake dis...

Fuel Hose forms the fuel filter section of the fuel delivery circuit. It routes fuel through the filter housing, connecting the filter into the su...

Brake Pad Set for the front axle, sized for 18-inch brakes. The set provides the friction material that acts against the front brake discs. It is ...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Timing Chain - Secondary, Upper is part of the camshaft drive of the 2.0L Ingenium four-cylinder turbo diesel (AJ200D / AJ20D4). It runs in the up...

Knock Sensor for the engine management system, mounted on the rear face of the cylinder block. Petrol applications only - Ingenium AJ200P, AJ20P an...

Gasket Kit

Fuel Filter - diesel fuel filter for the 2.2L Td4 engine, fitted in the low-pressure fuel supply circuit. The filter sits between the fuel tank an...

Engine Mount Insulator is the rear lower engine mounting within the engine support system. It locates the engine to the subframe and isolates engi...

Gasket - Cylinder. Head Front Cover

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Brake Pads for the front axle, part of the front brake discs and calipers assembly. The front pads carry the greater share of the braking load. Th...

Thermostat Housing - coolant outlet housing in the engine cooling circuit of the 2.2L Td4 diesel engine. The housing mounts to the engine and carr...

Coolant Hose Assembly - heater outlet to thermostat housing hose in the engine cooling circuit. Returns coolant from the heater matrix outlet to t...

Water Pump circulates coolant through the engine cooling system. Driven from the engine, it pumps coolant through the block, cylinder head and rad...

Fuel Pressure and Temperature Sensor for petrol fuel-injection systems. The combined sensor measures fuel rail pressure and fuel temperature and r...

Timing Chain for the timing drive of the 2.0L Ingenium four-cylinder diesel engine (AJ200D / AJ20D4). This is the lower, primary chain of the two-...

Coolant Hose Assembly - heater outlet to thermostat housing hose in the engine cooling circuit. Returns coolant from the heater matrix outlet to t...

Bumper Retainer Nut - a push-in retaining nut used in the front bumper, radiator grille and rear bumper assemblies. The retainer clips into a pres...

Coolant Hose - EGR cooler to heater inlet hose. Carries coolant from the EGR cooler outlet to the heater matrix inlet, linking the exhaust gas rec...

Exhaust Gas Temperature Sensor for the front position in the exhaust front pipe and catalyst assembly. The sensor threads into the front pipe upst...

Bolt - M8 x 45 mm Torx-head flange bolt for the propshaft flange connection. The bolt secures the flange-type propshaft joint to the mating drive ...

Clutch Master Cylinder - the hydraulic actuator at the head of the clutch circuit, mounted on the pedal box. It converts clutch-pedal effort into h...