for Discounts / VAT
for Discounts & Correct VAT
Replacement parts for every Land Rover Discovery generation, from the Series I (1989 to 1998) through to the Discovery 5 (L462) and Discovery Sport (L550). Genuine, OEM, and aftermarket components stocked in the Netherlands for EU delivery, with fitment matched to your exact model and year. The Discovery 4 parts collection is one of our most active if you own an L319-platform vehicle.
Quick answer: The Discovery 3 (2004 to 2009) and Discovery 4 (2009 to 2016) share the L319 platform, so some components cross over between the two generations. Always confirm your production year via VIN before ordering suspension, driveline, or engine parts. If you own a Discovery Sport, it sits on a separate platform from the main Discovery line and parts are not interchangeable.
Exterior mirror motor - left-hand side glass adjustment motor within the door mirror head. The motor sits behind the mirror glass and drives the g...
View full detailsCamshaft Position Sensor mounted in the timing gear cover, reading the toothed target on the camshaft drive to give the engine control module a dir...
View full detailsSpark Plug Aperture Gasket seals the spark plug aperture in the cylinder head cover on the left hand cylinder bank. It closes the joint between th...
View full detailsCamshaft Position Sensor mounted in the timing gear cover, reading the toothed target on the camshaft drive to give the engine control module a dir...
View full detailsThermostat Housing for the 5.0-litre AJ133 V8 petrol engine, part of the engine cooling circuit. The housing seats the coolant thermostat and form...
View full detailsThermostat Housing for the 5.0-litre AJ133 V8 petrol engine, part of the engine cooling circuit. The housing seats the coolant thermostat and form...
View full detailsCylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...
View full detailsCylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...
View full detailsKey Blank is an uncut key supplied as a service part for the vehicle lock set. It is provided as a blank blade and must be cut to the individual v...
View full detailsScrew - a general fixing screw used at several mounting points across the driveline and body, including transmission and transfer case mountings, t...
View full detailsChain - Timing
Brake Pad Set for the rear disc brake assembly. The pads sit in the rear caliper carrier and are clamped against the brake disc by the caliper pis...
View full detailsKit fuel injection
Turbocharger Circlip - retaining clip for the turbocharger actuator on diesel turbocharger installations. It secures the actuator rod to the contr...
View full detailsO-Ring seals the variable valve timing (VVT) solenoid within the timing gear and sprocket assembly. It maintains an oil-tight joint between the VV...
View full detailsFan Pulley - viscous fan drive pulley from the accessory drive (pulleys and drive belts) assembly. One fitted per engine. Driven by the auxiliary ...
View full detailsCrankcase Breather Hose forms part of the crankcase emission control (ventilation) system on the 4.4L V8 AJ petrol engine. It carries crankcase bl...
View full detailsGasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...
View full detailsSpark Plug Aperture Gasket for the right-hand camshaft cover, sealing the spark plug well against oil ingress. The camshaft cover carries a tube f...
View full detailsO-Ring for the oil pump inlet tube, part of the oil pump, sump and filter assembly. It seals the joint at the oil pump inlet (pick-up) tube, keepi...
View full detailsCylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...
View full detailsGasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...
View full detailsHex Head Nut - M14 x 70mm. Crankshaft pulley fixing. It secures the crankshaft pulley and drive-belt assembly at the crankshaft nose, seating agai...
View full detailsSecondary Drive Belt from the front end accessory drive, 1444 mm in length and eight-ribbed. It runs from the crankshaft pulley over the tensioner...
View full detailsExhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...
View full detailsAir Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...
View full detailsBreather Tube - crankcase ventilation tube within the engine's emission control system. It routes crankcase gases from the engine back into the in...
View full detailsKit - Tension Pulley
Brake Pad - rear disc brake friction pad. The pad sits between the caliper piston and the brake disc; hydraulic pressure clamps it against the dis...
View full detailsCam Cover Gasket for the right-hand cylinder head of the 5.0L AJ133 V8 petrol engine, part of the camshaft cover assembly. The gasket seals the jo...
View full detailsTiming Tensioner Screw - M8 x 45mm is the fastener that secures the chain tensioner within the timing gear assembly of the 5.0 litre V8 petrol (AJ1...
View full detailsGasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...
View full detailsO-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...
View full detailsTransmission Oil Drain Plug for the ZF 6HP26 and 6HP28 six-speed automatic transmission - Transmission External Components assembly group. M18 x 1...
View full detailsTiming Gear Bolt from the engine timing drive, securing the camshaft sprocket and variable camshaft timing adjuster to the camshaft. It provides t...
View full detailsO-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...
View full detailsCrankshaft Position Sensor for engine management, mounted in the lower cylinder block and oil pan area facing the crankshaft reluctor ring. As the...
View full detailsScrew, M6 x 38mm, from the timing gear assembly - timing chains, tensioners and guides, and the auxiliary drive. It retains the chain guide in pos...
View full detailsWater Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...
View full detailsCrankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...
View full detailsPin, 6 x 36mm, from the timing gear and auxiliary drive assembly of the 5.0L AJ133 V8 petrol engine. It serves as the guide pin for the auxiliary ...
View full detailsIgnition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...
View full detailsCrankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...
View full detailsIgnition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...
View full detailsD3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...
View full detailsSensor - Crankshaft Position - C
Pulley - Fan
Blind Anchor Nut - a threaded anchor nut that provides a captive fixing point where the reverse side of the panel is inaccessible. It is used in t...
View full detailsParts for every Land Rover Discovery generation, from the original 1989 Discovery 1 to the current Discovery 5 (L462) and Discovery Sport (L550). Genuine, OEM, and aftermarket components in stock, dispatched from the EU. Select your generation below to find parts matched to your exact model.
The Land Rover Discovery family spans six distinct generations, each with its own platform, engine range, and fitment boundaries. Choosing the correct child collection ensures you find parts matched to your specific model, not just the Discovery name.
| Generation | Chassis Code | Production Years | Platform Notes |
|---|---|---|---|
| Discovery 1 parts | No L-code | 1989 to 1998 | Body-on-frame, shared chassis architecture with Range Rover Classic and 90/110 Defender. Marketed at launch as Discovery Series I. |
| Discovery 2 parts | L318 | 1998 to 2004 | Body-on-frame, extended rear overhang, coil springs all round. Marketed as Discovery Series II. |
| Discovery 3 parts | L319 | 2004 to 2009 | Independent air suspension, Integrated Body Frame architecture |
| Discovery 4 parts | L319 | 2009 to 2016 | Shares L319 platform with Discovery 3, revised engines and interior |
| Discovery 5 parts | L462 | 2017 to present | New aluminium-intensive platform, separate from all previous generations |
| Discovery Sport parts | L550 | 2014 to present | Compact crossover, JLR D8 then Premium Transverse Architecture, related to Range Rover Evoque |
The Discovery 3 and Discovery 4 share the L319 platform designation, which means some structural, driveline, and suspension components overlap between the two generations. Where cross-generation fitment applies, part listings will confirm compatibility. If you are unsure of your exact model, use the identification guidance below before ordering.
Vehicle IdentificationThe Discovery name covers vehicles built between 1989 and today across multiple distinct platforms and engine families. Ordering by model name alone is not sufficient for fitment accuracy. The correct identification method depends on the generation.
Discovery 1 (1989 to 1998): chassis number stamped on the right-hand side of the bulkhead, with a duplicate plate in the engine bay. Pre-1996 vehicles use a 17-character VIN format introduced in 1980 for export markets, while early UK-market cars may carry an 11-digit chassis number on the plate. Cross-reference with the V5C or registration document if the plate is corroded.
Discovery 2 (1998 to 2004): 17-digit VIN stamped on the right-hand bulkhead and on a plate visible through the windscreen base. The 10th character identifies the model year.
Discovery 3, 4, 5, and Discovery Sport: standard 17-digit VIN on the windscreen base plate, on the driver-side door jamb sticker, and in the V5C. The 10th character identifies model year. For Discovery 3 and Discovery 4 in particular, confirm model year via VIN before ordering suspension, engine, or driveline components, as both share the L319 platform code but have different engine variants, transmission options, and calibration specifications.
For Discovery 1 vehicles where the original documentation is missing or the chassis plate is unreadable, the British Motor Industry Heritage Trust holds factory build records and issues Heritage Certificates confirming original specification and production date. See britishmotormuseum.co.uk/archive/heritage-certificates. For Discovery 2 onward, the standard Land Rover Workshop Manual for the relevant model contains the full VIN decoding reference.
Budget Parts stocks over 3,900 parts across the full Discovery family. Coverage spans suspension and steering, braking, cooling and heating, engine and ancillaries, driveline and propshafts, electrical and sensors, chassis and body, and clutch and transmission. Each category collection below filters parts across all compatible Discovery generations. If you know the component type you need, start there. If you are working on a specific generation, start with the relevant model collection from the generations table above.
Air springs, shock absorbers, control arms, bushings, and steering components across the Discovery range.
Suspension and steering parts →Discs, pads, calipers, hoses, and hydraulic components for every Discovery generation.
Brake system parts →Radiators, thermostats, water pumps, expansion tanks, and coolant hoses for petrol and TDV6 Discoveries.
Cooling and heating parts →Propshafts, driveshafts, CV joints, and universal joints across body-on-frame and IBF Discoveries.
Drive mechanism parts →Belts, pulleys, gaskets, sensors, and engine service components for the 200Tdi, 300Tdi, Td5, TDV6, SDV6, and petrol V6/V8 Discoveries.
Engine parts →Ignition components, sensors, switches, wiring, and electrical service parts across the Discovery range.
Electrical parts →Structural repair sections, crossmembers, body panels, and chassis fasteners, including Discovery 2 rear crossmember repair sections.
Chassis and body parts →The Discovery range covers thirty-seven years of production, and parts supply differs sharply between early Series-era models and current Discovery 5 vehicles. Three quality tiers run across the catalogue, and the right choice depends on the generation, the system, and how long you intend to keep the vehicle.
Genuine parts are boxed under the Land Rover or Jaguar Land Rover part number, produced to factory specification. For Discovery 3, 4, 5, and Discovery Sport, Genuine supply remains active and is the appropriate tier for warranty-sensitive repairs, air suspension components, and turbocharger or EGR replacement on the TDV6. For Discovery 1 and Discovery 2, Genuine supply has been thinning since 2010 and is restricted to selected service items.
OEM parts come from the same suppliers Land Rover uses on the production line, sold in the supplier's own box rather than the JLR box. ZF for automatic transmissions, Bosch for ignition and injection, Pierburg for EGR coolers and vacuum pumps, Delphi for diesel injection on the TDV6, and Valeo for clutch components are all present in the Discovery parts catalogue. OEM matches Genuine specification at a lower price.
Aftermarket parts come from third-party manufacturers to a functional specification. For older Discoveries where Genuine has been discontinued, aftermarket is often the only available tier and covers the practical bulk of restoration and DIY repair work. Quality varies by brand. Each product listing on this site states the tier and, where relevant, names the OEM supplier so the choice is explicit before purchase.
EU Stock and DispatchAll Discovery parts are stocked and dispatched from the Netherlands. Orders placed before 15:00 CET on working days ship the same day. Standard delivery within the EU is two to four working days for most member states, with no customs paperwork or import VAT between EU destinations. UK orders are dispatched under standard post-Brexit customs procedures with VAT and duties handled at delivery. For workshop and trade customers placing regular orders, contact Budget Parts directly for account terms.
Technical GuidesThe guides below cover the diagnostic and replacement decisions that come up most often on Discovery vehicles. Each one is generation-specific and identifies the parts that actually fix the underlying fault, not just the symptom.
For Discovery 4 TDV6 owners experiencing reduced power or limp mode. Covers the upstream causes of DPF blockage including EGR faults and failed sensors, with guidance on the correct parts to address the root cause before replacing the filter.
Discovery 4 DPF parts guide →For Discovery 2 (L318) owners facing APK or MOT structural failure due to crossmember corrosion. Explains how internal corrosion develops, how to inspect correctly, and which repair section to select for a long-term solution.
Discovery 2 crossmember repair guide →For Discovery 3 and Discovery 4 owners with electronic parking brake warnings. Covers the common misdiagnosis of actuator failure, explains why worn brake shoes and cable resistance are typically the root cause, and identifies the parts required for a correct repair.
Discovery EPB failure guide →Identification depends on the generation. For Discovery 1 (1989 to 1998), check the chassis number stamped on the right-hand bulkhead or on the plate in the engine bay, and cross-reference with the V5C. For Discovery 2 (1998 to 2004) and all later generations, use the 17-digit VIN on the windscreen base plate or the driver-side door jamb sticker. The 10th character of the VIN identifies the model year. Discovery 1 covers 1989 to 1998, Discovery 2 covers 1998 to 2004, Discovery 3 covers 2004 to 2009, Discovery 4 covers 2009 to 2016, Discovery 5 covers 2017 to present, and the Discovery Sport has been produced since 2014. For Discovery 1 vehicles with missing documentation, the British Motor Industry Heritage Trust issues Heritage Certificates confirming factory build specification.
Partially. The Discovery 3 and Discovery 4 share the L319 platform designation, which means some structural, driveline, and suspension components are common between the two generations. However, the Discovery 4 introduced revised engine variants, updated transmission calibrations, and different electrical specifications compared to the Discovery 3. You cannot assume full cross-compatibility. Always check the part listing for confirmed fitment before ordering. Where a part fits both L319 generations, the product listing will state this. If you are uncertain, filter by your specific model within the Discovery 3 or Discovery 4 collection pages.
Genuine parts carry the Land Rover or Jaguar Land Rover part number and are manufactured to the original factory specification. OEM parts are produced by the original component supplier, often the same manufacturer that supplies the Genuine range, but sold under the supplier's own brand. In most applications, OEM quality is equivalent to Genuine at a lower price. Aftermarket parts are produced by third-party manufacturers to a functional specification and vary in quality by brand and application. For critical systems such as braking, steering, and air suspension on a Discovery 3 or Discovery 4, Genuine or OEM is the recommended tier. For wear items, fasteners, and filters, quality aftermarket parts are an appropriate and cost-effective choice.
Yes. Budget Parts stocks components for all six Discovery generations, including the Discovery 1 (1989 to 1998) and Discovery 2 (L318, 1998 to 2004). For these older generations, some Genuine Land Rover supply has been discontinued, and stock consists of OEM-equivalent and aftermarket components that meet the original specification. For the Discovery 3, Discovery 4, Discovery 5, and Discovery Sport, both Genuine and OEM supply remains active alongside aftermarket options. If a specific part is not listed, contact Budget Parts directly with your part number or chassis number for availability.
No. The Discovery Sport and the Discovery 5 are separate vehicles on distinct platforms. The Discovery Sport (L550) is a compact crossover produced from 2014 and is based on the JLR D8 architecture, later updated to the Premium Transverse Architecture shared with the Range Rover Evoque. The Discovery 5 (L462) is a full-size SUV produced from 2017 on a separate aluminium-intensive platform. The two models share no platform or major mechanical components. Parts for each model are listed in separate collections and are not interchangeable.
All Discovery parts are dispatched from the Netherlands. Orders placed before 15:00 CET on working days ship the same day. Standard delivery is two to four working days to most EU member states, with no customs paperwork or import VAT between EU destinations. UK orders ship under standard post-Brexit customs procedures with VAT and duties applied at delivery. Tracking is provided on every shipment. For trade and workshop accounts placing regular orders, contact Budget Parts directly for account terms.