Land Rover Discovery Parts

Water Pump circulates coolant through the engine cooling system. Driven from the engine, it pumps coolant through the block, cylinder head and rad...

Fuel Pressure and Temperature Sensor for petrol fuel-injection systems. The combined sensor measures fuel rail pressure and fuel temperature and r...

Brake Pad Set - Rear - friction pad axle set for the rear disc brake assembly. The pads locate in the rear caliper carriers and clamp against the ...

Primary Fuel Filter for the 3.0L V6 diesel engine. The primary filter sits in the front fuel supply line and removes contaminants and water from th...

Bumper Retainer Nut - a push-in retaining nut used in the front bumper, radiator grille and rear bumper assemblies. The retainer clips into a pres...

Oil Sump Gasket seals the oil pan (sump) to the cylinder block on the V6 diesel engine. It maintains an oil-tight joint at the base of the engine,...

Bolt

Bolt for the exhaust system front section. This fastener secures the flanged joint between the exhaust manifold and the front pipe section, holdin...

Turbocharger Oil Feed Pipe for the turbocharger lubrication circuit. Carries pressurised engine oil from the oil supply to the turbocharger bearin...

Transmission Oil Cooler - part of the automatic gearbox cooling circuit, fitted to ZF 8-speed automatic transmissions. The cooler dissipates heat ...

Water Pump circulates coolant through the engine cooling system. Driven from the engine, it pumps coolant through the block, cylinder head and rad...

Trim Clip that secures interior and exterior trim panels, door finishers and mouldings to the body. The clip locates in a pre-formed panel apertur...

Brake Pad Set - Rear - friction pad axle set for the rear disc brake assembly. The pads locate in the rear caliper carriers and clamp against the ...

Timing Chain for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It forms part of the engine's timing drive, running between th...

Tyre Pressure Sensor - wheel-mounted pressure and temperature sensor for the Tyre Pressure Monitoring System (TPMS). Mounted at the valve position...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Rear Brake Disc - a vented disc from the rear brake disc and caliper assembly. The disc is mounted on the rear hub behind the road wheel and rotat...

Turbocharger Oil Feed Pipe for the turbocharger lubrication circuit. Carries pressurised engine oil from the oil supply to the turbocharger bearin...

Thermostat Housing for the 2.0L Ingenium petrol engine (AJ200P, including PHEV applications). The housing holds the coolant thermostat and forms p...

Manifold Absolute Pressure Sensor for the 3.0L V6 diesel engine (TDV6, second generation, single and twin-turbo). The MAP sensor measures the abso...

Bolt - M8 x 75mm secures the lower timing gear on the V6 diesel engine. It is a fastener within the timing gear drive assembly. Thread size M8, le...

Hose and Bracket - Heating

Lower Timing Gear Screw - a fixing screw in the engine timing drive, retaining the lower timing gear. Used on the 3.0 V6 diesel engine (and the 2....

Thermostat for the engine cooling system on the 3.0L 24V DOHC V6 turbo diesel engine. It regulates coolant flow between the engine and radiator, s...

Thermostat & Housing is a combined coolant thermostat and housing assembly within the engine cooling system. The thermostat regulates coolant ...

Ignition Coil for the engine ignition system. It steps up battery voltage to the high voltage needed to fire the spark plug and is mounted directly...

EGR Tube connecting the exhaust manifold to the EGR valve on the 3.0L V6 turbo diesel engine. Carries hot exhaust gas from the exhaust manifold to...

VVT Solenoid is the exhaust-camshaft variable valve timing control solenoid for the 2.0L 16V turbocharged petrol engine. Acting on signals from th...

Cylinder Block Plug, 16mm, seals a threaded port in the cylinder block. It closes an internal casting passage in the block, retaining pressure and...

Fuel Injection Pump Bolt secures the high-pressure fuel injection pump to its mounting on the engine. It provides the clamping load that holds the...

Wheel Nut Set - set of twenty wheel nuts, sufficient for four five-stud road wheels. Each nut clamps the road wheel against the hub face on the wh...

Rear Suspension Arm - an upper control arm in the rear multi-link suspension assembly. It connects the rear subframe to the wheel hub carrier, loc...

Drive Belt Tensioner - maintains correct tension on the front accessory (auxiliary) drive belt. The sprung tensioner assembly applies constant loa...

Drive Belt Tensioner - maintains correct tension on the front accessory (auxiliary) drive belt. The sprung tensioner assembly applies constant loa...

Rear Brake Disc - vented - for the rear axle braking assembly. The internal vane structure between the two friction faces channels airflow through ...

Timing Chain - Lower is the lower (primary) chain of the timing drive on the 2.0L Ingenium four-cylinder petrol engine (AJ200 / AJ20P4, including t...

Brake Pad Kit - Front - front axle set of disc brake pads for the 19-inch front brake disc and caliper installation. The pads are clamped against ...

Filter Air Panel