Land Rover Freelander 1 Parts

Indicator Bulb - amber replacement bulb for the exterior indicator lighting circuit. Installs into the indicator lamp housing and provides the amb...

Fits Land Rover Defender models (2007-2016) Clear lens wit orange bulb designed for a sleek, modern look

Coolant Temperature Sensor - blue-connector variant - within the engine management system. The sensor monitors coolant temperature and transmits a...

Blade Fuse - 25A for Land Rover electrical systems. This 25A blade fuse protects individual circuits in the vehicle fuse box from overcurrent damage.

Rivet used within the main wiring harness assembly to secure harness routing and retain protective coverings to body mounting points. Maintains st...

Ignition Lead - King The king lead in the high-tension ignition circuit. It carries the high-tension output from the ignition coil to the centre t...

Bulb Holder is the bulb and holder assembly that provides the illumination for the clock and cigar lighter on the centre console. The holder seats...

Side Repeater Bulb Holder for the exterior indicator and side-repeater lighting circuit. The holder fits within the lens housing and provides the ...

Roof Aerial Base is the roof-mounted mounting and connection base for the radio antenna. It secures the aerial mast to the roof panel, seals the m...

Wiper Spindle Cap - outer cap for the windscreen wiper spindle, installed at the outer end of the spindle where it passes through the scuttle panel...

Brake Light Switch is the stop lamp switch within the brake lighting circuit, mounted on the brake pedal bracket in the pedal box. When the brake ...

Key Fob Battery - CR2032 3V lithium button cell for Land Rover remote central locking handsets. Fits directly into the remote key fob housing. Rep...

Front ABS Sensor is a wheel speed sensor within the anti-lock braking system. Mounted at the front hub, it generates a signal proportional to whee...

Camshaft Position Sensor for the 1.8L 4-cylinder K Series petrol engine, part of the engine management sensor group mounted at the cylinder head. ...

Brake Light Switch for the braking and signalling circuit. Mounted at the brake pedal assembly, this switch closes when the pedal is depressed, co...

Fusible Link is a high-current circuit-protection device fitted in the engine compartment fuse box. It protects heavy-current wiring and the downs...

Wiper Motor Rack for the front windscreen wash/wipe system, for left-hand drive applications. The rack transfers drive from the wiper motor to the...

Fuel pump diesel replacement

ABS Sensor Bush is a retaining bush used to locate the wheel speed sensor within its mounting point in the hub or axle assembly. The bush provides...

Engine Sensor Wiring Harness - short link lead within the engine management wiring of the 1.8L K Series petrol engine. It connects the camshaft po...

Heater Resistor Pack for the heating and ventilation (HVAC) blower circuit. It provides the stepped resistance that sets the lower blower motor fan...

Fuel Pump for the 1.8L 4-cylinder petrol fuel delivery system. Mounted in the fuel tank, the pump draws fuel from the tank and delivers it under p...

Window Regulator - Front Door - Left Hand for the Freelander 1. This is the mechanical actuator assembly mounted inside the front left-hand door th...

Washer Pump for the rear screen washer system. The pump pressurises the washer fluid circuit to deliver fluid to the rear screen jet. Mounts in th...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Repeater Side Clear LED Pair

Changeover Relay

Rear Bumper-Mounted Lamp Assembly, right-hand side - the lower rear lamp set into the rear bumper. It carries the stop and direction-indicator (fl...

Rear Bumper Lamp, Right-Hand Side. Lamp unit installed in the right-hand side of the rear bumper, forming part of the rear exterior lighting assemb...

Hill Descent Control Switch - push-push switch mounted in the clutch (bell) housing, forming part of the Hill Descent Control input circuit. The s...

Bulb Holder Assembly - Clock & Cigar Lighter

Relay - Normally Open is a plug-in make-contact relay used in the vehicle fuse and relay panel. The relay closes its high-current main contacts on...

Heavy-duty winter wiper blades, supplied as a front pair. The blade frame is enclosed in a protective cover so that snow, ice and slush cannot pac...

Parking Aid Sensor for the front bumper inner position, forming part of the Parking Distance Control (PDC) system. The sensor emits ultrasonic pul...

Parking Aid Sensor - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the bumper cover. The transducer emits a...

Front Fog Lamp Bulb - H11 halogen capsule rated 12V 55W, operating in the exterior lighting system. The H11 uses the standardised PGJ19-2 base, wh...

Stop and Tail Bulb - 12V 21/5W twin-filament bulb. Two filaments share a single envelope: the 21W filament serves the stop lamp and the 5W filamen...

W5W Capless Bulb - 12V 5W wedge-base bulb. The W2.1x9.5d capless base pushes straight into the lampholder, the bulb's own wire leads folded back a...

H7 Halogen Bulb - 12V 55W headlamp bulb. H7 is a single-filament halogen capsule on a PX26d base, serving the dipped or main beam function dependi...

H7 Halogen Bulb - Twin Pack - 12V 55W headlamp bulbs, supplied as a pair. H7 is a single-filament halogen capsule on a PX26d base, serving the dip...

Rear Lamp Seal - left-hand foam gasket sealing the rear lamp assembly against the body panel. It sits between the lamp housing flange and the body...

Bulb Holder - double-pole bulb holder for the rear stop and tail lamp. It carries the twin-filament stop/tail bulb and locates by bayonet fitting ...

Bulb Holder - double-pole bulb holder for the rear stop and tail lamp. It carries the twin-filament stop/tail bulb and locates by bayonet fitting ...

Number Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. The lamp is housed in the rear door handle a...

Rear Lamp Assembly - Stop & Flasher - rear lamp cluster within the rear exterior lighting assembly group, combining the stop lamp and direction...