Land Rover Freelander 1 Parts

Alternator – K-Series – 90A The engine-driven charging unit that powers the electrical system and maintains battery charge on the 1.8L K Series pet...

Crankshaft Oil Seal - the rear crankshaft oil seal for the 2.0L L-Series 8-valve diesel engine. It seats around the rear of the crankshaft where i...

Glow Plug threads into the cylinder head and projects into the combustion chamber, heating the intake air on start-up to assist cold-starting on di...

Front Crankshaft Oil Seal for the M47 2.0L 16V and M57 3.0L diesel engines, sealing the crankshaft nose at the front of the engine. The seal locat...

Engine Tie Rod is the lower torque reaction rod that locates the engine and transmission, controlling powertrain movement and transmitting torque r...

Inlet Manifold Gasket for the 1.8L K-Series petrol engine, fitted in the induction system between the inlet manifold and the cylinder head. It sea...

V-Belt QH

Poly-V Alternator Belt for the auxiliary drive system of the 2.0L 4-Cylinder 8-valve TCie Rover diesel engine, on air-conditioned applications. Th...

Drive Belt for the auxiliary drive system of the 1.8L 4-Cylinder K Series petrol engine, on applications without air conditioning. This multi-rib ...

A/C Compressor Drive Belt for the 1.8L petrol engine, 884mm. This auxiliary belt drives the air conditioning compressor from the engine crankshaft...

Crankshaft Position Sensor for 4-cylinder petrol applications - 1.8L K Series and 2.0L MPi T Series - mounted at the crankshaft in the engine block...

Heater plug OEM DELPHI / BERU

O-Ring - Fuel Injector - Diesel - sealing ring in the fuel injector and pipe assembly on diesel engines. The ring seals the injector joint against...

Intake Manifold O-Ring is a sealing ring for the intake manifold of the 2.5L KV6 V6 petrol engine. It seals the joint between the manifold and its...

Head Gasket for the Rover KV6 2.5L V6 petrol engine, fitted at the cylinder head-to-block joint in the top-end assembly. This gasket seals the com...

Crankshaft Oil Seal - Front for the KV6 2.5L V6 petrol engine. Presses into the front cover housing to seal around the crankshaft snout, preventin...

Oil Filter is a replaceable filter element for the engine oil lubrication circuit. This is the element (cartridge) type, which fits inside the eng...

Hose Clip for the engine cooling circuit on the 2.5L KV6 petrol engine. This moulded plastic clip secures the coolant hose running from the water ...

Oil Pump Seal for the 1.8L K-series petrol engine. Seals the oil pump body to prevent oil loss at the pump housing interface. Installed at the oil...

Auxiliary Drive Belt for the 1.8L K-Series four-cylinder petrol engine, driving the alternator. The belt runs from the crankshaft pulley to the al...

Belt Tensioner Pulley Assembly for the auxiliary drive belt system on the 2.5L V6 Petrol engine. This automatic tensioner assembly maintains corre...

Intercooler Hose connecting the intercooler to the inlet manifold. It delivers cooled, compressed charge air from the intercooler to the engine int...

Oil Pump Gasket for the Rover KV6 2.5L V6 petrol engine, sealing the oil pump housing to the engine block in the lubrication circuit. This gasket ...

Restore optimal engine performance with this Air Cleaner Hose Kit, specifically designed for the Land Rover Freelander 1 with a K-Series petrol eng...

element filter cleaner air Freel. TD4 OEM Mahle

Auxiliary Drive Belt - polyvee (multi-rib) belt, 2030mm, for the ancillary drive on the Td4 M47 2.0L 16-valve four-cylinder turbo diesel. Driven f...

Flange Bolt - M12 x 80 mm. Secures the engine mounting. The integral flange spreads clamp load across the mounting bracket face.

Intake Manifold Gasket for the KV6 2.5L V6 petrol engine. Seals the joint between the intake manifold and the cylinder head, maintaining charge in...

Belt Tensioner for the power steering pump drive of the 1.8L 4-cylinder K-Series petrol engine. The tensioner maintains correct tension on the aux...

Ignition coil with bracket OEM Freelander1 1.8L K-series petrol from (VIN) 1A000001 onwards 2 per engine.

Depression Control Valve mounted on the camshaft cover of the diesel engine. It regulates the internal depression (vacuum) of the engine, maintain...

Dipstick Tube Gasket for the 1.8L K-Series petrol engine, sealing the oil dipstick tube where it mounts to the bearing ladder. The gasket forms th...

Belt Tensioner for the power steering pump drive of the 2.0L L-Series diesel engine. The tensioner maintains correct tension on the auxiliary belt...

Dowel is a hollow locating dowel ring that aligns two mating housings during assembly, holding their faces in register and taking shear load off th...

Intercooler Hose for the turbocharged charge-air circuit of the TD4 M47 2.0L 16V diesel engine. It forms part of the boost pipework between the tu...

Camshaft Cover Gasket for the Rover KV6 2.5L V6 petrol engine, sealing the camshaft cover to the cylinder head within the valvetrain assembly. It ...

Valve Stem Oil Seal for the 1.8L K-Series four-cylinder and 2.5L KV6 petrol engines, part of the cylinder head valve train. The seal fits over the...

Alternator, 150 A output, for the charging system of the 2.0L Td4 four-cylinder diesel engine (BMW M47). Driven by the auxiliary drive belt from t...

Crankshaft Main Bearing Half, Grooved for the 2.5 KV6 V6 petrol engine in the Freelander 1. The Land Rover parts catalogue lists this grooved half...

Exhaust Valve for the 1.8L K Series four-cylinder petrol engine. Operates in the cylinder head, opening to release spent combustion gases into the...

Crankshaft Damper for the 2.0L TD4 four-cylinder diesel engine (M47). This torsional vibration damper mounts on the crankshaft nose to control tors...

Camshaft Seal - Rear - Petrol is the oil seal fitted at the rear of the camshaft within the cylinder head assembly. This seal prevents engine oil ...

Camshaft Front Seal seals the front of the camshaft where it passes through the cylinder head behind the timing drive, retaining engine oil and pre...

Camshaft Seal - Rear - Petrol is the oil seal fitted at the rear of the camshaft within the cylinder head assembly. This seal prevents engine oil ...

Coolant pump for the engine cooling system, mounted to the front of the cylinder block. The pump drives coolant circulation through the cylinder b...

Starter Motor for the M47 2.0L 16-valve TD4 diesel engine, part of the engine starting circuit. The unit mounts to the joint face between engine a...