for Discounts / VAT
for Discounts & Correct VAT
Parts for the Land Rover Freelander 1, chassis code L314, produced from 1997 to 2006. Covers all four engine variants: 1.8 K-series petrol, 2.5 KV6 V6 petrol, 2.0 L-series diesel (1997 to 2000), and 2.0 TD4 diesel (2001 to 2006). OEM and aftermarket components held in EU stock with fitment support by engine and VIN.
Air cleaner element installed in the engine intake air cleaner housing to filter incoming air before it reaches the induction system. The element...
View full detailsFitment All TD5 diesel models up to (VIN) 6A999999 All TD5 diesel models All V8 EFi petrol models 2.5L 6 Cyl BMW Diesel /4.0L and 4.6L EFI V8 P...
View full detailsWater Pump Seal: sealing ring for the coolant pump (Land Rover description 'Seal-coolant pump'). Used in the Td5 coolant pump installation, also i...
View full detailsCoolant - Blue RTU pre-mixed engine coolant and antifreeze for older Land Rover models. Ready to use straight from the container - no dilution req...
View full detailsGearbox Oil 75W80 is a 75W80-grade manual transmission fluid (MTF) formulated for the R380 5-speed manual gearbox. It lubricates the gears, synchr...
View full detailsFiller cap
ATF - Dexron III is an automatic transmission fluid meeting the Dexron III specification, supplied in a 5 litre container. It is a hydraulic fluid...
View full details24v dsl long belt
Sump Plug for the engine oil sump (oil pan), part of the engine lubrication system. It threads into the drain hole at the base of the sump to seal...
View full detailsCap - Pressure - Radiator
Wiper Blade for the rear screen wash/wipe system. Fits the rear wiper arm and sweeps the tailgate glass, operating with the rear wiper motor and w...
View full detailsRadiator Top Hose for the engine cooling system. This upper hose carries hot coolant from the engine's thermostat outlet to the radiator top inlet...
View full detailsBreather filter (M47 2.0L I4 16V Diesel) (M57 D30 3.0 Diesel)
Engine Coolant, pre-mixed for use in the engine cooling system. It circulates through the radiator, water pump and heater circuit to regulate opera...
View full detailsThermostat O-Ring - K-Series / KV6 is the sealing O-ring for the thermostat housing on the 1.8L K-Series 4-cylinder and 2.5L KV6 petrol engines. I...
View full detailsOil Filter - 1.8L K-Series MPI is the engine oil filter for the 1.8L K-Series 4-cylinder petrol (MPI) engine. It forms part of the engine lubricat...
View full detailsOil Filter for the Freelander 1 fitted with the 2.0L L Series Diesel engine. Replaces the engine oil filter as part of a routine oil service. The ...
View full detailsRear brake shoe set Freel. 1A>
Fuel Filter for the TD4 2.0L diesel engine fuel system. This filter element installs within the fuel filter housing in the engine bay fuel circuit...
View full detailsAir Filter - panel air filter for the engine air intake, seated in the airbox upstream of the intake ducting to trap airborne dirt before it reache...
View full detailsV Belt - Power Steering Pump drive belt for the accessory belt system on the Freelander 1. This V belt connects the crankshaft pulley to the power...
View full detailsFitment: All 2.0L L Series diesel models
Air cleaner filter element
Fuel Filter - Freelander TD4
Radiator Hose - Top - upper radiator hose in the engine cooling circuit of the 1.8L K16 16-valve petrol engine. It carries hot coolant from the en...
View full detailsHeavy-duty winter wiper blades, supplied as a front pair. The blade frame is enclosed in a protective cover so that snow, ice and slush cannot pac...
View full detailsFuel Filter is the cartridge-type filter in the diesel fuel supply circuit, mounted between the tank and the injection pump. It removes particulat...
View full detailsFuel Filter is the cartridge-type filter in the diesel fuel supply circuit, mounted between the tank and the injection pump. It removes particulat...
View full detailsFuel Filter is the cartridge-type filter in the diesel fuel supply circuit, mounted between the tank and the injection pump. It removes particulat...
View full detailsFuel Filter - in-tank filter mounted on the fuel pump and sender assembly, part of the fuel tank pump, sender and mountings group. The filter scre...
View full detailsOff Road Foam Air Filter - FL1
Off-Road Foam Air Filter Element for the air box in the engine induction system, dimensioned to sit in the standard housing in place of the paper e...
View full detailsAutomatic Transmission Fluid for the JF506E five-speed automatic transmission. Supplied in a 1 litre container. The fluid meets the JF506E specifi...
View full detailsService Kit for the 1.8L K-Series four-cylinder petrol engine, grouping the scheduled engine and cabin filtration items into a single pack. The ki...
View full detailsFully synthetic engine oil, SAE 5W-40 - 5 litre container. Engine lubrication system. A 5W-40 multigrade: the 5W winter rating gives cold-start fl...
View full detailsFully synthetic engine oil, SAE 5W-30, ACEA C1 - 5 litre container. Engine lubrication system. ACEA C1 is a low-SAPS classification - reduced sulp...
View full detailsFully synthetic engine oil, SAE 5W-40 - 1 litre container. Engine lubrication system. A 5W-40 multigrade: the 5W winter rating gives cold-start fl...
View full detailsFully synthetic engine oil, SAE 5W-30, ACEA C1 - 1 litre container. Engine lubrication system. ACEA C1 is a low-SAPS classification - reduced sulp...
View full detailsMajor Service Kit for the Td4 2.0L four-cylinder turbo diesel, grouping the scheduled engine and cabin filtration items into a single pack. The ki...
View full detailsEngine Thermostat and Housing Assembly for the 2.5L KV6 six-cylinder petrol engine, fitted in the engine cooling circuit. The thermostat regulates...
View full detailsWater Pump - engine coolant pump assembly for the 1.8L K Series 4-cylinder petrol engine, operating within the Engine Cooling System. Mounted to t...
View full detailsWater Pump - engine coolant pump assembly for the 2.0L T Series MPi petrol and 2.0L 8V TCIE diesel engines, operating within the Engine Cooling Sys...
View full detailsSpark plug for the ignition system. The plug threads into the cylinder head and fires the compressed air and fuel charge in the combustion chamber...
View full detailsSpark plug for the ignition system. The plug threads into the cylinder head and fires the compressed air and fuel charge in the combustion chamber...
View full detailsFront Brake Pad Set - friction pads for the front disc brake calipers, supplied as a complete axle set covering both front wheels. The pads are cl...
View full detailsService Kit for the Td4 2.0L diesel engine. Provides the filters and service components required for a scheduled service.
Service Kit for the Td4 2.0L diesel engine. Provides the filters and service components required for a scheduled service.
Service Kit for the 2.0L diesel engine (TCiE). Provides the filters and service components required for a scheduled service.
The Land Rover Freelander 1 (L314) was produced from October 1997 to November 2006. It was sold across two body generations: the pre-facelift range (1997 to 2003) and a significantly revised facelift introduced in 2004. The 2004 update brought a new exterior face, a revised interior, and changes across all derivatives, but the core platform and drivetrain architecture remained unchanged throughout the full production run.
Parts compatibility on the Freelander 1 depends on engine type, production year, and in some cases gearbox specification. The four engine variants each have distinct service requirements and separate part profiles. Gaskets, filters, timing components, sensors, and engine ancillaries are engine-specific and are not shared across variants. Always confirm your engine before ordering.
| Engine | Type | Years |
|---|---|---|
| 1.8 K-series (18K4F) | Petrol 4-cylinder | 1997 to 2006 |
| 2.5 KV6 | Petrol V6 | 2001 to 2006 |
| 2.0 L-series Di | Diesel 4-cylinder | 1997 to 2000 |
| 2.0 TD4 (BMW M47R) | Diesel 4-cylinder | 2001 to 2006 |
The 1.8 K-series was the only engine available from launch and ran across the full production span. The KV6 V6 petrol and TD4 diesel were both introduced for 2001 and ran to the end of production. The L-series Di diesel was an early diesel option, available only on pre-facelift vehicles up to 2000.
All four variants share the same drivetrain layout. A viscous coupling unit (VCU) links the front and rear axles. An intermediate reduction drive (IRD) acts as the front differential and power distribution unit. Hill Descent Control was standard across the range. No low-range transfer case was fitted to any Freelander 1 variant.
Gearbox choices were a 5-speed manual on K-series, L-series, and most TD4 variants, and a 5-speed Jatco JF506E automatic on the KV6. The automatic was also available as an option on TD4 models.
The Freelander 1 sold over 540,000 units across Europe during its production run, making it the best-selling four-wheel drive vehicle in Europe for five consecutive years following its 1997 launch.
Parts CategoriesOver 500 parts are available for the Freelander 1 in this collection, covering all major categories for the full L314 production run.
Engine and cooling parts cover timing belt kits, water pumps, thermostats, cooling hoses, head gasket sets, coolant sensors, and engine oil filters. The K-series and TD4 use different timing components and separate service intervals. Parts for each engine are listed by engine type within this collection.
Drivetrain parts cover viscous coupling units, IRD assemblies, CV joint kits, driveshaft assemblies, and propshaft components. These are among the highest-value and most fitment-sensitive items in the L314 range. Confirm your engine and gearbox specification before ordering drivetrain components.
Suspension and steering parts cover front lower arm assemblies, ball joints, front and rear bushes, anti-roll bar drop links, wheel bearings, and steering rack components. The pre-facelift and facelift suspension geometry is largely compatible, but part numbers should be confirmed by production year.
Braking parts cover the front discs and pads, along with the rear drum-and-shoe setup used across the full L314 production run. Replacement drums, shoes, and wheel cylinders are listed alongside the disc and pad lines in this collection. Use the category filters to select the specific components required for your model year.
Gearbox and transmission parts cover clutch kits for manual variants, gear selector components, and gearbox oil.
Body electrical parts cover window regulator and motor assemblies. Driver and passenger side assemblies are not interchangeable. Confirm the door position before ordering.
Service and consumables cover engine oil, air filters, fuel filters, spark plugs for petrol variants, and glow plugs for diesel variants.
Trim and exterior parts cover door seals, body clips, fasteners, and exterior trim components.
Vehicle IdentificationCorrect parts selection for a Freelander 1 requires the engine variant, the model year, and in some cases the gearbox type. The two 2.0-litre diesel engines are a common source of ordering errors. The L-series Di (1997 to 2000) is a Rover-designed unit. The TD4 (2001 to 2006) uses a BMW M47R block. These are entirely different engines. Parts designed for the TD4 will not fit an L-series Di vehicle, and vice versa.
The KV6 V6 petrol was the only Freelander 1 engine variant sold in North America and was never available with a manual gearbox on L314 vehicles. KV6 engine parts including timing components, head gaskets, and cooling items are specific to this engine and are not shared with the 1.8 K-series.
The engine code is stamped on the engine block. For confirmation of model year from the VIN, refer to the official Land Rover VIN guide: Land Rover VIN model year guide.
If you cannot confirm the correct part from the collection filters, contact Budget Parts with your VIN and engine code before ordering. Fitment support is available for all four Freelander 1 engine variants.
Trade BuyersThe Freelander 1 is a regular presence in independent workshops across the Netherlands, Belgium, and Germany. Budget Parts supplies trade buyers and garages with OEM and Genuine parts for the full L314 range. Wholesale pricing and VAT-correct invoicing for EU business purchases are available via the wholesale portal in the site header.
Freelander RangeIf you are looking for Freelander 2 (L359) parts, or need to confirm which generation your vehicle belongs to, visit the Land Rover Freelander parts parent collection.
Technical GuidesThe following guides cover the technical context most relevant to Freelander 1 owners and workshop buyers. They support fault diagnosis and informed part selection and link directly back to the components available in this collection.
The primary reference for the L314 range. Covers K-series head gasket and cooling system behaviour, TD4 EGR and swirl flap faults, IRD failure sequence, VCU and tyre-matching rules, suspension wear patterns, brake system items, and service interval data by engine variant.
Freelander 1 maintenance guide →Driveline fault diagnosis across Land Rover models with specific relevance to the Freelander 1 drivetrain. Useful for understanding the interaction between the VCU, IRD, and front CV joints before selecting replacement driveline components.
Land Rover driveshaft and driveline diagnosis →Relevant to Freelander 1 manual gearbox variants on K-series, L-series, and TD4 models. Covers the overlap between clutch disc, flywheel, and hydraulic system faults to help confirm the correct component before purchasing a clutch kit.
Land Rover clutch fault diagnosis →VCU, IRD, CV joint, driveshaft, and propshaft components. Filter the driveshaft and propshaft collection to Freelander 1 fitment.
Driveshaft and propshaft parts →Timing belt kits, tensioners, and idlers for the K-series, TD4, and L-series Di engines. Filter the timing belts collection by engine variant.
Land Rover timing belts →Water pumps, thermostats, coolant hoses, and cooling system sensors. K-series cooling components are a common L314 service category.
Land Rover cooling parts →Lower arms, ball joints, bushes, anti-roll bar drop links, and wheel bearings. Filter the suspension collection to Freelander 1 fitment.
Land Rover suspension parts →Front and rear discs, pads, caliper rebuild kits, and DOT 4 brake fluid for the L314 range. Filter the brake parts collection by axle and production year.
Land Rover brake parts →Clutch kits, slave cylinders, and release components for the K-series, L-series, and TD4 manual variants.
Land Rover clutch parts →The Freelander 1 was produced with four engine options. The 1.8-litre Rover K-series petrol four-cylinder was available from 1997 to 2006 across the full production run. The 2.5-litre Rover KV6 V6 petrol was introduced for the 2001 model year and ran to 2006. The 2.0-litre Rover L-series Di diesel was available from 1997 to 2000 only. The 2.0-litre BMW M47R TD4 diesel replaced it from 2001 and ran to the end of production in 2006. Parts are not shared between engine variants. Always confirm your engine code before ordering.
The Freelander 1 received a significant update in 2004 with changes across all derivatives, covering the exterior, interior, and specification. For most mechanical components including drivetrain, braking, and suspension parts, pre-facelift (1997 to 2003) and facelift (2004 to 2006) vehicles use compatible parts, but this should always be confirmed by production year and part number. Body, trim, and electrical components can differ between the two production phases and are not always interchangeable. Confirm your model year before ordering body or trim items.
The Viscous Coupling Unit (VCU) is the mechanical coupling that links the front and rear axles on all Freelander 1 four-wheel drive variants. It transfers torque between axles based on rotational speed differences between the front and rear propshafts. A seized or failed VCU places severe stress on the Intermediate Reduction Drive (IRD), which acts as the front differential and power distribution unit. IRD failure resulting from VCU deterioration is one of the most serious and expensive failure modes on the Freelander 1. Budget Parts stocks VCU and IRD components for the L314 range. Correct tyre matching across all four wheels is essential to VCU service life: all four tyres must be the same brand, model, and specification, and tread depth difference between axles should not exceed 3 mm. A mismatched set creates continuous rotational conflict in the VCU, accelerating wear and placing abnormal load on the IRD.
Service requirements vary significantly by engine. The 1.8 K-series petrol uses a timing belt that must be replaced every 100,000 km or 5 years, with the belt, tensioner, and idler replaced together as a kit. The early 2.0 L-series Di diesel (1997 to 2000) is also belt-driven, with a commonly cited interval of 80,000 km, though this should be confirmed against the specific vehicle's service record.
The 2.0 TD4 (BMW M47R) uses a hybrid timing system. The camshafts are driven by an oil-bathed duplex chain at the front of the engine, which has no scheduled replacement interval. A separate toothed belt at the rear of the cylinder head drives the high-pressure fuel injection pump, and this fuel pump belt should be replaced every 120,000 km or 10 years. Auxiliary drive belts are best replaced at the same service interval. Generic "TD4 timing belt kits" available from aftermarket catalogues refer to the fuel pump belt, not the camshaft chain.
No. The Freelander 1 (L314) and Freelander 2 (L359) are different vehicles built on different platforms with different engines and different drivetrain systems. The Freelander 2 uses the Ford EUCD platform, a 2.2-litre PSA DW12 diesel, and a Haldex coupling four-wheel drive system. None of these are shared with the Freelander 1. Engine parts, drivetrain components, suspension items, and electrical systems are all generation-specific. Parts designed for one generation will not fit the other.