Land Rover Freelander Parts

Wheel Spanner with a 27 mm socket, a hand tool for removing and refitting wheel nuts. Engages the 27 mm hexagon of the wheel nut to loosen or tigh...

Oil Drain Plug threads into the drain port at the base of the engine sump, sealing the oil pan against leakage during operation. It sits within the...

Clip

Relay, a 70A 4-pin grey mini power relay. It provides high-current make-and-break switching for a heavy electrical load, letting a low-current con...

Wheel Spanner - 24mm for removing and fitting wheel nuts on Land Rover vehicles. This 24mm spanner is sized for the standard wheel nut used across...

Dust Cap is the small protective cover that fits over a hydraulic bleed nipple in the braking system. Pushed onto the bleed screw of a brake calip...

Hex Nut, M24 x 1.5mm securing the constant-velocity (CV) joint stub shaft to the wheel hub within the driveline. The nut retains the CV joint and ...

Steering Column Shear Bolt securing the steering column mounting clamp to its bracket. The head is designed to shear off once the specified instal...

Festoon Bulb for interior lamps. A double-ended festoon bulb that locates between the sprung contacts of the courtesy, map and interior lamp housi...

Fuel return tube O-ring seal

Shear Bolt for the steering column lock housing. This tamper-resistant security fixing clamps the steering column lock and ignition switch housing ...

Parking Aid Sensor, Rear - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the rear bumper cover. This is the ...

Exterior Mirror Glass for the right-hand door mirror. The replaceable glass element locates into the exterior door mirror housing, providing the r...

Mirror Glass - Convex - LH for the left-hand exterior door mirror assembly. This replacement glass has a convex profile, providing a wider field o...

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

Kinetic Recovery Rope - vehicle recovery accessory for extracting a bogged or stuck vehicle. Unlike a static strap, a kinetic rope stretches under...

Towing Jaw rated to 3.5 tonnes, part of the towing/pintle hitch assembly. It provides the jaw coupling for trailer and recovery towing, mounting t...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Exhaust Mounting - Rubber is a rubber isolator in the exhaust suspension system, fitted between the exhaust assembly and the vehicle underbody. Th...

Radiator tank assembly (Use Cap PCD000090/PCD500030)

Front Fog Lamp Bulb - H11 halogen capsule rated 12V 55W, operating in the exterior lighting system. The H11 uses the standardised PGJ19-2 base, wh...

Tailgate Lock Control Switch for the luggage compartment and tailgate locking system. Operates the tailgate lock, signalling the central locking t...

Door Handle Lock Cap for the exterior door handle. It fits over the lock mechanism aperture in the handle, covering and protecting the locking com...

Connector

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Door Handle Cap for the exterior door handle assembly, fitting at the outer end of the handle in the position the lock barrel would otherwise occup...

Brake Caliper Guide Pin Dust Cover for the front and rear brake calipers. The boot fits over the caliper guide pin and seals against the carrier b...

Parking Sensor for the park distance control (PDC) system, used in both front and rear bumper positions. The sensor mounts into its aperture in th...

Parcel Shelf Catch Clip is the retaining catch for the load compartment cover (parcel shelf), part of the loadspace trim assembly. Supplied in an e...

Number Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. It sits in the rear number plate surround an...

Door Latch for the rear door, left-hand side, operating within the door lock control assembly. The latch engages the striker on the body aperture t...

Mirror Housing Cover for the exterior door mirror assembly, left-hand side. The cover is the outer cap that fits over the mirror housing to enclos...

Mirror Housing Cover for the exterior door mirror assembly, right-hand side. The cover is the outer cap that fits over the mirror housing to enclo...

Front Door Latch - LH for the front door locking assembly, left-hand side. This latch mechanism mounts inside the front left-hand door and retains...

Mirror Glass - Convex - RH for the right-hand exterior door mirror. The convex (wide-angle) glass widens the rearward field of view to reduce the o...

Exhaust Mounting Rubber Insulator fitted within the exhaust system support assembly to suspend and isolate exhaust pipe sections from the vehicle b...

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...

Size/Diameter: 433 MHZ door lock frequency

Luggage Compartment Lock Switch is the exterior release switch for the tailgate lock. Pressing the switch signals the body control module to relea...

lamp repeater side - Discovery3 - Freelander2 - Range Rover Sport upto (VIN) 8A999999

Door Check Buffer - Rubber bump stop for the door check mechanism on several Land Rover models. This rubber buffer is mounted within the door chec...

Winch Remote Control operates an electric recovery winch wirelessly, allowing the operator to stand clear of the winch line during recovery. Wirel...

Portable Jump Starter and Air Compressor - a handheld 12V power pack combining a battery jump starter, power bank, tyre inflator and LED work light...

Wing Mirror Covers are a pair of chromed upper caps for the exterior door mirror assembly. Each cover fits over the upper section of the existing ...