for Discounts / VAT
for Discounts & Correct VAT
Land Rover steering components carry the driver's input from the steering wheel to the front wheels, controlling direction through the steering box or rack, track rods, drag links and the hydraulic or electric assistance parts that work with them. Left-hand-drive and right-hand-drive vehicles may use different steering boxes, racks, columns, drop arms and pipework, so confirm your vehicle's drive side alongside the model before ordering. This collection spans genuine, OEM and aftermarket options, from a simple track rod clamp to a complete steering rack or steering box.
Steering drop arm lever for left-hand drive steering box applications. This component connects the steering box output shaft to the steering linka...
View full detailsSteering Damper Stabiliser - a hydraulic damper fitted within the steering linkage assembly to control the oscillation and vibration transmitted th...
View full detailsTrack Rod End Boot - Polyurethane for the steering track rod end ball joint. This polyurethane boot fits over the track rod end housing, sealing t...
View full detailsTrack Rod End with a right-hand thread, forming part of the steering linkage. The track rod end is the articulating ball joint that connects the t...
View full detailsTrack Rod Clamp is a split-tube collar that secures the threaded track rod end into the track rod tube on the front steering axle. Once the front ...
View full detailsPower Steering Pump is the engine-driven hydraulic pump at the heart of the power-assisted steering circuit on the 300 TDi 2.5L turbo diesel. Belt...
View full detailsTrack Rod End for the steering linkage, with a left-hand thread. The track rod end forms the ball-jointed connection between the steering link and...
View full detailsTrack Rod End Boot for the steering track rod end ball joint. This rubber boot fits over the track rod end housing, sealing the ball joint against...
View full detailsHose assy reservoir to pump Defender TD5
Drag Link Ball Joint Kit for the steering box drop arm on power-assisted steering boxes. The ball joint forms the articulating connection between ...
View full detailsSteering Box is the recirculating-ball power steering gear at the heart of the steering system, converting rotation of the steering column into the...
View full detailsReservoir assy
Lower Steering Column Universal Joint for the steering column assembly. This universal joint sits at the lower end of the steering shaft, transmitt...
View full detailsTrack Rod End for the steering linkage, with a left-hand thread. The track rod end forms the ball-jointed connection between the steering link and...
View full detailsO-Ring for the power steering hydraulic circuit, sealing a union on the 6mm power steering pipe. The O-ring seats at the connection between the po...
View full detailsTrack Rod End with right-hand thread, fitting at the outer end of the track rod within the steering linkage on the Defender, Discovery 1, and Range...
View full detailsTrack Rod & Steering Damper Bush for the steering linkage, locating the steering damper at its mounting eye. The bush insulates the damper mou...
View full detailsHydraulic Fluid - Rock Oil Power Steering and Active Cornering Fluid, 1 litre. Formulated for power steering systems and Active Cornering Enhanceme...
View full detailsTrack Rod End with a right-hand thread, forming part of the steering linkage. The track rod end is the articulating ball joint that connects the t...
View full detailsHose pump to box
Steering Column Shear Bolt securing the steering column mounting clamp to its bracket. The head is designed to shear off once the specified instal...
View full detailsThis steering drop arm transmits movement from the steering box output shaft to the steering linkage, enabling directional control at the front axl...
View full detailsPower Steering Pipe for the power-assisted steering hydraulic circuit, carrying pressurised fluid between the steering pump and the steering box. ...
View full detailsSteering UJ upper
Steering box sector shaft seal kit for the steering system. This kit contains the sealing components required for the sector shaft assembly withi...
View full detailsSteering Wheel - a 14-inch three-spoke replacement wheel with a black vinyl rim and black centre. The wheel mounts to the steering column through ...
View full detailsPower Steering Hose - Steering Box to Reservoir - Left-Hand Drive for the Range Rover Classic and Discovery 1 hydraulic steering circuit. This hos...
View full detailsTrack Rod End Assembly for the steering linkage, connecting the track rod to the steering drop arm and transmitting movement from the steering box ...
View full detailsSteering Shaft Assembly forming the intermediate link between the steering column and the steering box. The shaft transmits rotation from the stee...
View full detailsPower Steering Pump Seal Kit – Cast provides the seals needed to overhaul the cast-bodied power steering pump within the steering hydraulic circuit...
View full detailsSteering Wheel is a 15-inch three-spoke replacement wheel that mounts to the steering column. It is supplied without a boss, so a separate fitting...
View full detailsSteering Column Lock - the steering column lock and ignition switch assembly. Mounted on the steering column, it mechanically locks the column whe...
View full detailsReturn to Centre Steering Damper for installation within the steering linkage assembly. This unit mounts between the axle steering arms and the st...
View full detailsSteering Damper - Heavy Duty Type for the steering linkage assembly on Discovery 1 and Range Rover Classic. This hydraulic damper is mounted betwe...
View full detailsSteering Box Seal Kit reseals the input shaft of the 4-bolt power steering box within the power-assisted steering circuit. The input shaft is wher...
View full detailsEnhance the steering strength and responsiveness of your Land Rover Discovery 1 and Range Rover Classic with these heavy-duty steering arms. He...
View full detailsPower Steering Filter for the power-assisted steering (PAS) fluid reservoir, part of the Steering Hydraulic Circuit. This filter element sits insi...
View full detailsPower Steering Pipe O-Ring - a seal in the power steering hydraulic circuit. It fits at the union between a power steering pipe and its mating conn...
View full detailsTrack Rod Clamp Kit secures the track rod within the steering linkage assembly, holding the joint in position so the steering geometry stays set. ...
View full detailsTrack Rod Tube for the front steering linkage of the Discovery 1 and Range Rover Classic. The track rod tube forms the central threaded section of...
View full detailsSteering Damper - 4-Stage Adjustable for Land Rover Defender 90, 110, and 130. This hydraulic steering damper mounts between the axle and chassis ...
View full detailsDrop arm LHD RRcl, D1 92>
Steering Box is the steering gear at the heart of the power-assisted steering circuit. It converts steering-wheel rotation into lateral movement o...
View full detailsPower Steering Pump - the engine-driven pump at the heart of the power steering hydraulic circuit. Belt-driven from the engine, it draws fluid fro...
View full detailsPower Steering Hose - the high-pressure feed line in the power steering hydraulic circuit. It carries pressurised fluid from the power steering pu...
View full detailsSteering lock
Upgrade or replace your steering wheel boss with this high-quality 36-tooth adapter, designed specifically for Land Rover Defender to 1991 90/110 v...
View full detailsPower Steering Pump - Hobourn-type hydraulic pump serving the power-assisted steering circuit on V8 engines. It is driven from the crankshaft by a ...
View full detailsSuspension arm and axle bushes have their own home in Bushes and Rubbers, so this page stays focused on the parts that steer. Budget Parts has supplied Land Rover parts for more than 25 years, with stock held across our Dutch warehouse network for fast EU dispatch.
The steering system carries the driver's input from the wheel to the front tyres, and feeds every bump and road camber back through the same path. On beam-axle Land Rover models that means a steering box, drop arm, drag link and track rod; on rack-and-pinion models it is a steering rack, track rod ends and, where power-assisted, a pump, hose and reservoir. Worn components show up as play or vagueness at the wheel, wander or pulling under braking, a clonk over bumps, or fluid leaks from a pump or hose. Because steering works within the wider Land Rover axle, suspension and steering system, it is worth checking the ball joints and bushes at the same time.
This page brings together the steering range for Series, Defender, Discovery, Freelander and Range Rover models. Left-hand-drive and right-hand-drive variants use different steering boxes, racks, columns and drop arms across most of this range, so confirm your build before ordering. Suspension arm and axle bushes are covered separately in Bushes and Rubbers, and standalone suspension ball joints sit in Ball Joints.
Buying GuideBefore anything else, confirm left-hand-drive or right-hand-drive. Steering boxes, racks, columns, drop arms and some pipework are handed, so the same model and engine can need two different part numbers depending on drive side. Check this alongside the model and build date rather than assuming it from the vehicle's market.
A worn steering box or rack does not always need full replacement. Seal and repair kits can renew leaking seals, boots and gaiters and other small serviceable components, but they will not correct worn gears, bearings, a pitted shaft or a damaged housing, so they suit a unit that is otherwise sound. Where the housing is worn, pitted or the fluid shows metal contamination, fit a complete steering box, steering gear or steering rack instead. The same logic applies to steering dampers: some are supplied with their bush included, others need the bush ordered separately, so check the listing before you buy.
Genuine, OEM and aftermarket. Genuine steering boxes, racks and columns carry the Land Rover part number and sit at the top of the price range, particularly on later electric power-assisted racks. OEM or OES parts come from original-equipment manufacturers or recognised OE suppliers, and brands such as Lemforder, Delphi, Bosch and Meyle may appear as OE, OES or aftermarket depending on the specific item. Aftermarket also covers reconditioned exchange units and value brands for wear items such as track rod ends, drag links and steering linkage hardware. For a standard repair, an OEM or OES part is usually the sensible balance of cost and quality; save genuine for warranty-sensitive or late-model vehicles where an exact match matters.
FitmentThe table below groups models by steering type so you can see which parts apply. Confirm the exact box, rack or column by VIN or build, since drive side and power-assistance type both change the part number.
| Model group | Steering type | Drive side | Notes |
|---|---|---|---|
| Series 1, 2, 2A, 3 | Steering box (worm and nut on Series 1, recirculating ball on Series II, IIA and III), drag link and track rod | LHD and RHD produced | No factory power steering; aftermarket conversions common |
| Defender (to 2016) | Steering box (recirculating ball), drag link and track rod, power-assisted on later models | LHD and RHD | Steering box and drop arm are handed |
| Defender (L663) | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Discovery 1 | Steering box (recirculating ball), drag link and track rod, power-assisted | LHD and RHD | Steering box is handed |
| Discovery 2 | Steering box (recirculating ball), drag link and track rod, power-assisted | LHD and RHD | Steering box is handed |
| Discovery 3 and 4 | Rack and pinion, power-assisted | LHD and RHD | Rack and column are handed |
| Discovery 5 | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Discovery Sport | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Range Rover Classic | Steering box (recirculating ball), drag link and track rod, power-assisted | LHD and RHD | Steering box is handed |
| Range Rover P38 | Steering box (recirculating ball), drag link and track rod, power-assisted | LHD and RHD | Steering box is handed |
| Range Rover L322 | Rack and pinion, power-assisted | LHD and RHD | First Range Rover on rack and pinion steering |
| Range Rover L405, L460 | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| RR Sport L320 | Rack and pinion, hydraulic power-assisted | LHD and RHD | Shares Discovery 3/4 hydraulic system |
| RR Sport L494, L461 | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Freelander 1 and 2 | Rack and pinion, power-assisted | LHD and RHD | Confirm by VIN |
| Range Rover Evoque | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Range Rover Velar | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
Match the part to your specific vehicle before ordering, starting with drive side. Left-hand-drive and right-hand-drive Land Rovers may use different steering boxes, racks, columns, drop arms, pipework and mounting hardware, so confirm this before the model or engine. Work from the build date and VIN rather than the model year alone, because steering specification can change mid-production and between markets. The VIN plate is on the chassis or under the bonnet depending on model; a VIN or chassis-number search returns the exact steering build. On power-assisted systems, also confirm whether your vehicle uses hydraulic or electric assistance, since the pump, hose and reservoir parts differ between the two.
FittingSteering components are safety-critical parts that directly control the vehicle. Fit new locking nuts and split pins where specified, torque all fixings to the correct figure, and confirm left-hand-drive or right-hand-drive before ordering. Book a wheel alignment after replacing any part that sets toe.
How heat, dust and sustained pace attack cooling, brakes and suspension on a hard-driven Defender, with upgrade priorities.
Defender suspension under rally loadDesert-rally preparation for the Defender 90 covering suspension, cooling, air intake and the spares worth carrying.
Defender 90 desert suspension setupControl arms, radius arms, trailing links and wishbones for front and rear axles.
Land Rover suspension arms and control armsDampers, struts and off-road coilovers with fitting hardware.
Land Rover shock absorbers and dampersRoad springs, lift springs, spring seats and related spring hardware.
Land Rover coil springs and kitsSwivel kits, stub axles, half shafts and drive flanges.
Land Rover axle and swivel partsHub bearings, wheel hubs, oil seals and taper roller bearings.
Land Rover wheel bearings and sealsCheck the vehicle itself rather than assuming from the model or market, since privately imported and converted vehicles exist on both sides. Steering boxes, racks, columns and drop arms are handed parts, so ordering the wrong side means it will not bolt up. Confirm drive side alongside the model, engine and build date before ordering.
Genuine steering boxes, racks and columns carry the Land Rover part number and sit at the top of the price range, particularly on later electric power-assisted racks. OEM or OES parts come from original-equipment manufacturers or recognised OE suppliers, and brands such as Lemforder, Delphi, Bosch and Meyle may appear as OE, OES or aftermarket depending on the specific item. Aftermarket also covers reconditioned exchange units and value brands for wear items such as track rod ends, drag links and steering linkage hardware.
It depends on condition, not just age. A repair or seal kit can renew leaking seals, boots and gaiters and other small serviceable components, but it will not correct worn gears, bearings, a pitted shaft or a damaged housing, so it suits a unit that is otherwise sound. Where the housing is worn, pitted, or the fluid shows metal contamination, fit a complete steering box, steering gear or steering rack instead.
A steering damper controls kickback and oscillation at the front wheels, smoothing out the shock from ruts, potholes and rough tracks before it reaches the steering wheel. Some listings include the mounting bush, others supply the damper alone, so check the listing before ordering, especially if the existing bush is perished or cracked.
The track rod connects the two front wheels together and sets the toe angle, with a track rod end (a ball joint) at each side. The drag link, found on beam-axle steering-box vehicles, connects the steering box drop arm to the steering arm on the axle and transmits the driver's steering input. Both wear at their ball joints and both are checked for play in the same way.
Yes, for any part that sets or affects toe, including track rod ends, drag links, steering racks and steering arms. Book a four-wheel alignment after fitting to protect tyre life and keep the steering true. Parts that do not set toe, such as a power steering pump or hose, do not need a follow-up alignment.
Technical content by the Budget Parts workshop team.
Updated: July 2026