Land Rover Suspension Bushes & Anti-Roll Bar Kits

Land Rover suspension bushes are the rubber and polyurethane mounts that let radius arms, trailing arms, panhard rods, spring shackles and anti-roll bars pivot and flex without metal touching metal. This collection covers the full range: arm, chassis and shackle bushes, anti-roll bar bushes, drop links, brackets and complete anti-roll bar kits, plus bump stops. Shock absorber bushes and top mounts are shock-specific hardware and sit on the Shock Absorbers page instead, so you land on the exact part your vehicle needs.

Sort by

View as

602123550G - Link - Stabiliser Bar

- €85,10

€85,10

€85,10 - €85,10

€85,10

OEM

Available to order: 2-3 weeks delivery

Link - Stabiliser Bar

This collection spans leaf-sprung Series shackle bushes through to the polyurethane and active anti-roll bar parts used on modern Defender, Discovery and Range Rover models. Budget Parts has supplied Land Rover parts for more than 25 years, with stock held across our Dutch warehouse network for fast EU dispatch, whether you need a single polybush or a full anti-roll bar kit.

Overview

About Land Rover Suspension Bushes & Anti-Roll Bar Kits

A suspension bush is the rubber or polyurethane sleeve that lets a suspension arm, anti-roll bar or chassis mounting point pivot and flex without metal touching metal. Worn bushes show up as clonks over bumps, vague or wandering steering, uneven tyre wear and play found at inspection or APK. Because a bush works within the wider Land Rover axle, suspension and steering system, it is worth checking the arm, drop link or mounting point it sits in at the same time. Shock absorber bushes and top mounts are shock-specific fitting hardware, so those live on the Shock Absorbers page instead.

This page brings together the bush and anti-roll bar range for Series, Defender, Discovery, Freelander and Range Rover models. The range is especially broad on the independent-suspension platforms, Discovery 3 and 4 and Range Rover Sport in particular, where anti-roll bar hardware, control arm bushes and active-system components cover many variants. Where the bush is moulded into the arm itself, or the arm is bent, corroded or has a worn ball joint, replace the complete part from Suspension Arms instead.

Buying Guide

Choosing the Right Bush: Rubber or Polyurethane

Start with material. Standard rubber bushes restore the original ride and noise levels and are the sensible choice for a like-for-like repair. Polyurethane bushes, sold as polybush kits, are often chosen for their durability and reduced compliance under load, which can sharpen steering feel, though ride comfort, noise and service life vary by compound and application. Off-road and overland builds often move to polyurethane throughout for that extra control; daily-driven vehicles usually do better on rubber. Anti-roll bar bushes and drop links are common wear items because they move with the suspension on every corner, so check them whenever a knock develops from the front or rear of the vehicle.

Genuine, OEM and aftermarket. Genuine bushes and anti-roll bar parts carry the Land Rover part number. OEM or OES parts come from original-equipment manufacturers or recognised OE suppliers, and brands such as Lemforder, Delphi, Meyle and BWI may appear as OE, OES or aftermarket depending on the specific item. Aftermarket also covers value and upgrade brands, including Polybush for polyurethane bushes and Terrafirma for off-road hardware. For a standard repair, an OEM or OES bush is usually the sensible balance of cost and quality; for off-road or raised builds, match the bush material and anti-roll bar spec to your intended use.

Fitment

Model Fitment Scope

The table below groups models by suspension type so you can see which bush and anti-roll bar parts apply. Confirm the exact bush or bar by VIN or build, because position, side and bar diameter vary within a model.

Model group	Suspension type	Typical bush & ARB parts	Notes
Series 1, 2, 2A, 3	Live beam axles, leaf-sprung	Leaf spring bushes, shackle bushes	Few dedicated arm bushes; anti-roll bars rare
Defender (to 2016)	Live beam axles, coil-sprung	Radius arm, panhard rod and A-frame bushes, ARB bush and drop link	Polyurethane kits widely available
Defender (L663)	Independent; double wishbone front, integral-link rear	Wishbone and link bushes, ARB bush and drop link	Confirm by VIN
Discovery 1	Live beam axles, coil-sprung	Radius arm, trailing link, A-frame and panhard rod bushes, ARB bush and drop link	Bush kits common
Discovery 2	Live beam axles, coil-sprung, rear Watts linkage	Radius arm, trailing link, panhard rod and Watts linkage bushes, ARB bush and drop link	Bush kits common; ACE (Active Cornering Enhancement) hydraulic anti-roll system on some higher-spec models
Discovery 3 and 4	Independent; double wishbone front and rear	Wishbone and control arm bushes, ARB bush, drop link and bracket	Largest range here
Discovery 5	Independent; double wishbone front, integral-link rear	Control arm and link bushes, ARB bush and drop link	Confirm arm position by VIN
Discovery Sport	Independent; strut-type front, multi-link rear	Front lower arm bush, rear link bushes, ARB bush and drop link	Confirm by VIN
Range Rover Classic	Live beam axles, coil-sprung	Radius arm, panhard rod and A-frame bushes, ARB bush and drop link	Air suspension on late high-spec models, 1992 to 1996
Range Rover P38	Live beam axles, electronic air suspension from factory	Radius arm bushes and front/rear panhard rod bushes, ARB bush and drop link	No central A-frame (P38 uses front and rear Panhard rods to locate the axles); air suspension standard, coil conversions exist
Range Rover L322	Independent; MacPherson strut front, double wishbone rear	Wishbone and link bushes, ARB bush, drop link and complete bar	Confirm by VIN
Range Rover L405, L460	Independent; double wishbone front, integral-link rear	Control arm and link bushes, ARB bush, drop link and complete bar	Dynamic Response active anti-roll bar parts on some models; L405 well stocked
RR Sport L320	Independent; double wishbone front and rear (shares the Discovery 3/4 IBF platform)	Control arm and link bushes, ARB bush, drop link and complete bar	Well stocked
RR Sport L494, L461	Independent; double wishbone front, integral-link rear	Control arm and link bushes, ARB bush, drop link and complete bar	Dynamic Response active anti-roll bar parts on some models; confirm by VIN; L494 well stocked
Freelander 1 and 2	Independent; strut-type front, rear links	Front lower arm bush, rear link bushes, ARB bush and drop link	Confirm by VIN
Range Rover Evoque	Independent; strut-type front, multi-link rear	Front lower arm bush, rear link bushes, ARB bush and drop link	Confirm by VIN
Range Rover Velar	Independent; double wishbone front, integral-link rear	Control arm and link bushes, ARB bush and drop link	Confirm by VIN

Compatibility

Confirming the Right Bush for Your Vehicle

Match the part to your specific vehicle before ordering. Work from the build date and VIN rather than the model year alone, because suspension specification can change mid-production. The VIN plate is on the chassis or under the bonnet depending on model; a VIN or chassis-number search returns the exact suspension build. Confirm three things: the axle, front or rear; the position, such as radius arm, panhard rod or anti-roll bar; and, for anti-roll bar bushes, the bar diameter, since the bush is bored to match the bar and a mismatched inside diameter will not clamp correctly. Some bushes and anti-roll bar parts are handed, position-specific or market and specification-specific, so confirm by VIN before ordering.

Fitting

Common Fitting Notes

Fit pressed-in bushes with the correct press tool or a bush press kit, not a hammer, so the sleeve seats squarely and the rubber is not damaged.
Torque bushed pivot bolts at normal ride height, not on full droop, so the bush is not pre-loaded and does not tear early.
Replace anti-roll bar bushes and drop links in pairs, left and right, so roll stiffness stays even across the axle.
Check the bar diameter and bush bore before ordering. A bush that is too loose will rattle; one that is too tight will bind and wear the bar coating.
Book a wheel alignment if the worn bush was part of an arm that sets camber, caster or toe. Bushes that only locate a panhard rod or anti-roll bar do not usually need a follow-up alignment.

Important

Anti-roll bar and suspension bushes are safety-critical parts that affect handling and stability. Torque all fixings to the correct figure for your model, use the correct press tool for pressed-in bushes, and inspect the ball joint or arm the bush sits in while it is off the vehicle.

Technical Guides

Related Suspension & Steering Parts

Steering Components

Track rod ends, drag links, steering dampers, boxes and power-steering parts.

Land Rover steering components

Coil Springs

Road springs, uprated springs, lift kits and spring seats.

Land Rover coil springs and kits

Ball Joints

Suspension and steering ball joints, boots and fitting kits.

Land Rover ball joints and kits

Axle & Swivel Parts

Swivel kits, stub axles, half shafts and drive flanges.

Land Rover axle and swivel parts

Wheel Bearings & Seals

Hub bearings, wheel hubs, oil seals and taper roller bearings.

Land Rover wheel bearings and seals

FAQ

Land Rover Suspension Bush FAQs

Can I replace a suspension bush without replacing the whole arm?

Often yes. Pressed-in bushes, such as radius arm, panhard rod, trailing arm and anti-roll bar bushes, can usually be pressed out and renewed on their own. Where the bush is moulded integrally into the arm, or the arm itself is bent, corroded or has a worn ball joint, replace the complete arm instead. Check for play at the joint and cracking or splitting in the rubber before deciding.

What is the difference between rubber and polyurethane suspension bushes?

Rubber bushes restore the standard ride and noise levels and are the usual choice for a like-for-like repair. Polyurethane bushes, sold as polybush kits, are often chosen for their durability and reduced compliance under load, which can sharpen handling, though ride comfort, noise and service life vary by compound and application. Off-road and overland builds often fit polyurethane throughout; daily-driven vehicles usually do better on standard rubber.

What do anti-roll bar bushes and drop links do?

The anti-roll bar, or stabiliser bar, links the suspension on both sides of an axle and resists body roll in corners. The bushes mount the bar to the chassis or axle and let it twist, while the drop links connect the bar to the suspension arm at each corner. Worn bushes or drop links show up as clonking over bumps and at low speed, and as vague or less controlled handling in corners.

Are Land Rover suspension bushes sold individually or as a kit?

Both. Many bushes are listed individually so you can replace just the worn part, while polyurethane upgrades are commonly supplied as sets of two or four to renew every bush on an arm or axle in one job. Check the listing for pack quantity before ordering, especially on anti-roll bar bush and drop link kits.

What is the difference between genuine, OEM and aftermarket suspension bushes?

Genuine bushes and anti-roll bar parts carry the Land Rover part number. OEM or OES parts come from original-equipment manufacturers or recognised OE suppliers, and brands such as Lemforder, Delphi, Meyle and BWI may appear as OE, OES or aftermarket depending on the specific item. Aftermarket also covers value and upgrade brands, including Polybush for polyurethane bushes and Terrafirma for off-road hardware.

Can worn suspension bushes throw out my wheel alignment?

It depends which bush. A worn bush in an arm that sets camber, caster or toe, such as a radius arm or wishbone bush, can shift the geometry and is worth checking with a wheel alignment after replacement. Bushes that only locate a panhard rod or anti-roll bar do not directly set alignment angles, but book a check if the ride or handling still feels off after fitting.

Technical content by the Budget Parts workshop team.