Land Rover Suspension Bushes & Anti-Roll Bar Kits

Land Rover suspension bushes are the rubber and polyurethane mounts that let radius arms, trailing arms, panhard rods, spring shackles and anti-roll bars pivot and flex without metal touching metal. This collection covers the full range: arm, chassis and shackle bushes, anti-roll bar bushes, drop links, brackets and complete anti-roll bar kits, plus bump stops. Shock absorber bushes and top mounts are shock-specific hardware and sit on the Shock Absorbers page instead, so you land on the exact part your vehicle needs.

Sort by

View as

KQB500151LR - Front Differential Bush

- €166,30

€166,30

€166,30 - €166,30

€166,30

Genuine

Available to order: 2-3 weeks delivery

Front Differential Bush Mounting bush that locates and supports the front differential within the axle case. The bush isolates the differential fr...

View full details

LR085490LR - Tube - Active Roll Bar System by LAND ROVERSteering or Suspension Part Land Rover Range Rover Range Rover, Range Rover Sport

LR085490LR - Active Roll Bar Tube

- €930,00

€930,00

€930,00 - €930,00

€930,00

Genuine

Available to order: 2-3 weeks delivery

Active Roll Bar Tube - the front anti-roll bar for the ACE Active Roll Control suspension system. Unlike a fixed anti-roll bar, this tube is hydra...

View full details

LR058008LR - Insulator – Cross Member

- €65,40

€65,40

€65,40 - €65,40

€65,40

Genuine

Available to order: 2-3 weeks delivery

Cross Member Insulator for the rear suspension. This rubber mounting isolates the rear cross member from the body structure, damping road-induced ...

View full details

LR056319LR - Active Roll Bar Tube

- €370,00

€370,00

€370,00 - €370,00

€370,00

Genuine

Available to order: 2-3 weeks delivery

Active Roll Bar Tube, the high-pressure hydraulic pipe within the Active Roll Control (ARC) circuit of the Active Anti-Roll Bar system. It carries...

View full details

LR035469LR - Active Roll Bar Tube

- €340,00

€340,00

€340,00 - €340,00

€340,00

Genuine

Available to order: 2-3 weeks delivery

Active Roll Bar Tube is a high-pressure hydraulic pipe in the Active Roll Control (ARC) system - the hydraulic Active Cornering Enhancement (ACE) t...

View full details

LR037514LR - Insulator - Cross Member by LAND ROVERBody Part Land Rover Range Rover

LR037514LR - Cross Member Insulator

- €69,50

€69,50

€69,50 - €69,50

€69,50

Genuine

Available to order: 2-3 weeks delivery

Cross Member Insulator - a rubber isolating bush fitted between the rear suspension crossmember and the body structure. It cushions the crossmembe...

View full details

RYG501490G - Pin Steering or Suspension Part Land Rover Range Rover Defender

RYG501490G - Anti-Roll Bar Bolt – Rear

- €10,70

€10,70

€10,70 - €10,70

€10,70

OEM

Available to order: 2-3 weeks delivery

Rear Anti-Roll Bar Bolt secures the rear anti-roll bar within the rear suspension assembly. It fixes the bar to its mounting, holding it in positi...

View full details

FTC2007 - Bush - Gear Change

- €44,20

€44,20

€44,20 - €44,20

€44,20

Genuine

2 in stock

Bush - Gear Change FTC2007 FTC2008

FTC2009 - Change Gear Bush

- €14,40

€14,40

€14,40 - €14,40

€14,40

OEM

2 in stock

Bush gear change

FTC3698 - Link

- €24,70

€24,70

€24,70 - €24,70

€24,70

Aftermarket

Available to order: 2-3 weeks delivery

Link

FTC2006 - Mainshaft 1st Gear Selective Bush – LT77

- €42,70

€42,70

€42,70 - €42,70

€42,70

OEM

Only 1 left!

Mainshaft 1st Gear Selective Bush - LT77 is the selective bearing bush for 1st gear on the mainshaft of the LT77 5-speed manual gearbox. It fits b...

View full details

FQP000010 - Rear Side Door Latch Link Rod

- €12,30

€12,30

€12,30 - €12,30

€12,30

OEM

4 in stock

Rear Side Door Latch Link Rod forms part of the rear side door lock and latch mechanism. It transmits movement from the lock bellcrank to the latc...

View full details

FRC7652 - Diff Lock Connecting Link

- €19,80

€19,80

€19,80 - €19,80

€19,80

Genuine

Only 1 left!

Diff Lock Connecting Link is a linkage component in the centre differential lock actuation mechanism of the transfer box. It transmits movement fr...

View full details

FTC1310 - Mainshaft 3rd Gear Bush – LT77

- €25,90

€25,90

€25,90 - €25,90

€25,90

Genuine

4 in stock

Mainshaft 3rd Gear Bush - LT77 is the bearing bush for 3rd gear on the mainshaft of the LT77 5-speed manual gearbox. It sits between the mainshaft...

View full details

ERC5829 - Air Cleaner Mounting Bush – V8 EFI

- €2,30

€2,30

€2,30 - €2,30

€2,30

Genuine

7 in stock

Air Cleaner Mounting Bush is a rubber isolating bush that locates and supports the air cleaner housing on its mounting bracket. It cushions the ai...

View full details

Sold out

RTC5953 - Bush

- €27,40

€27,40

€27,40 - €27,40

€27,40

OEM

Out of stock

Bush

ANR4153 - Stabilizer Bar Link Bush

- €13,90

€13,90

€13,90 - €13,90

€13,90

OEM

Available to order: 2-3 weeks delivery

Stabiliser Bar Link Bush is fitted at the anti-roll bar link within the suspension. It cushions the connection between the stabiliser (anti-roll) ...

View full details

LR028972LR - Pad - Rubber Land Rover Range Rover

LR028972LR - Rubber Pad

- €1,10

€1,10

€1,10 - €1,10

€1,10

Genuine

Available to order: 2-3 weeks delivery

Rubber Pad is a butyl sealing pad used in the body sealing system to block water ingress at the lower body and door seal interface. The pliable bu...

View full details

BA 2224 - Anti-Roll Bar Kit – Complete

- €190,00

€190,00

€190,00 - €190,00

€190,00

OEM

Only 1 left!

Anti-Roll Bar Kit is a complete front and rear anti-roll bar upgrade for the suspension. It replaces the standard front anti-roll bar with a thick...

View full details

Sold out

333445 - Buffer

- €1,50

€1,50

€1,50 - €1,50

€1,50

Genuine

Out of stock

Buffer stop for the rear end door. Cushions the door against the body on the hinge side, limiting travel and preventing metal-to-metal contact.

1780230 - Baserack T-Slot Adaptor – Pair

- €71,80

€71,80

€71,80 - €71,80

€71,80

OEM

Available to order: 2-3 weeks delivery

BASE Rack T-Slot Adaptor - supplied as a pair. Allows T-slot compatible accessories to be mounted to the ARB BASE Rack modular roof rack system. Th...

View full details

1780520 - ARB Baserack Aux 2.8 20W

- €94,50

€94,50

€94,50 - €94,50

€94,50

OEM

Available to order: 2-3 weeks delivery

ARB Baserack Aux 2.8 20W

LR0905045B - Wishbone Bush

- €48,20

€48,20

€48,20 - €48,20

€48,20

OEM

Available to order: 2-3 weeks delivery

Wishbone Bush

TZT500040 - Bush by Allmakes Land Rover Range Rover

TZT500040 - Bush – Gear Selector Linkage

- €10,70

€10,70

€10,70 - €10,70

€10,70

Aftermarket

Available to order: 2-3 weeks delivery

Gear Selector Linkage Bush in the floor gear-change assembly of the ZF 6HP26 / 6HP28 6-speed automatic transmission. The bush forms the pivot at t...

View full details

TZT500040LR - Bush by LAND ROVER Land Rover Range Rover

TZT500040LR - Bush – Gear Selector Linkage

- €13,60

€13,60

€13,60 - €13,60

€13,60

Genuine

Available to order: 2-3 weeks delivery

Gear Selector Linkage Bush in the floor gear-change assembly of the ZF 6HP26 / 6HP28 6-speed automatic transmission. The bush forms the pivot at t...

View full details

TFSBK02 - Top Shock Bush Kit

- €4,70

€4,70

€4,70 - €4,70

€4,70

OEM

Available to order: 2-3 weeks delivery

Top Shock Bush Kit - replacement upper mounting bushes for Pro Sport and 8-stage adjustable remote reservoir shock absorbers. The bushes seat in t...

View full details

TF294 - Bush - Anti-Roll Bar - Rear - PU - 25.4m by Terrafirma Land Rover Range Rover

TF294 - Anti-Roll Bar Bush – Rear – PU – 25.4mm

- €31,90

€31,90

€31,90 - €31,90

€31,90

OEM

Available to order: 2-3 weeks delivery

Anti-Roll Bar Bush in polyurethane, 25.4mm bore, for the rear anti-roll bar mounting. The bush sits where the bar is clamped to its chassis bracke...

View full details

TF140SPA - Internal Spacer – Bump Stop

- €14,40

€14,40

€14,40 - €14,40

€14,40

OEM

Available to order: 2-3 weeks delivery

Internal Spacer for the TF140 hydraulic bump stop, part of the suspension bump stop assembly. The spacer fits inside the bump stop to shorten the ...

View full details

- €36,20

€36,20

€36,20 - €36,20

€36,20

Genuine

Available to order: 2-3 weeks delivery

Plug for the hydraulic valve block of the Active Anti-Roll Bar system with Roll Stability Control. The valve block contains the solenoid and relie...

View full details

This collection spans leaf-sprung Series shackle bushes through to the polyurethane and active anti-roll bar parts used on modern Defender, Discovery and Range Rover models. Budget Parts has supplied Land Rover parts for more than 25 years, with stock held across our Dutch warehouse network for fast EU dispatch, whether you need a single polybush or a full anti-roll bar kit.

Overview

About Land Rover Suspension Bushes & Anti-Roll Bar Kits

A suspension bush is the rubber or polyurethane sleeve that lets a suspension arm, anti-roll bar or chassis mounting point pivot and flex without metal touching metal. Worn bushes show up as clonks over bumps, vague or wandering steering, uneven tyre wear and play found at inspection or APK. Because a bush works within the wider Land Rover axle, suspension and steering system, it is worth checking the arm, drop link or mounting point it sits in at the same time. Shock absorber bushes and top mounts are shock-specific fitting hardware, so those live on the Shock Absorbers page instead.

This page brings together the bush and anti-roll bar range for Series, Defender, Discovery, Freelander and Range Rover models. The range is especially broad on the independent-suspension platforms, Discovery 3 and 4 and Range Rover Sport in particular, where anti-roll bar hardware, control arm bushes and active-system components cover many variants. Where the bush is moulded into the arm itself, or the arm is bent, corroded or has a worn ball joint, replace the complete part from Suspension Arms instead.

Buying Guide

Choosing the Right Bush: Rubber or Polyurethane

Start with material. Standard rubber bushes restore the original ride and noise levels and are the sensible choice for a like-for-like repair. Polyurethane bushes, sold as polybush kits, are often chosen for their durability and reduced compliance under load, which can sharpen steering feel, though ride comfort, noise and service life vary by compound and application. Off-road and overland builds often move to polyurethane throughout for that extra control; daily-driven vehicles usually do better on rubber. Anti-roll bar bushes and drop links are common wear items because they move with the suspension on every corner, so check them whenever a knock develops from the front or rear of the vehicle.

Genuine, OEM and aftermarket. Genuine bushes and anti-roll bar parts carry the Land Rover part number. OEM or OES parts come from original-equipment manufacturers or recognised OE suppliers, and brands such as Lemforder, Delphi, Meyle and BWI may appear as OE, OES or aftermarket depending on the specific item. Aftermarket also covers value and upgrade brands, including Polybush for polyurethane bushes and Terrafirma for off-road hardware. For a standard repair, an OEM or OES bush is usually the sensible balance of cost and quality; for off-road or raised builds, match the bush material and anti-roll bar spec to your intended use.

Fitment

Model Fitment Scope

The table below groups models by suspension type so you can see which bush and anti-roll bar parts apply. Confirm the exact bush or bar by VIN or build, because position, side and bar diameter vary within a model.

Model group	Suspension type	Typical bush & ARB parts	Notes
Series 1, 2, 2A, 3	Live beam axles, leaf-sprung	Leaf spring bushes, shackle bushes	Few dedicated arm bushes; anti-roll bars rare
Defender (to 2016)	Live beam axles, coil-sprung	Radius arm, panhard rod and A-frame bushes, ARB bush and drop link	Polyurethane kits widely available
Defender (L663)	Independent; double wishbone front, integral-link rear	Wishbone and link bushes, ARB bush and drop link	Confirm by VIN
Discovery 1	Live beam axles, coil-sprung	Radius arm, trailing link, A-frame and panhard rod bushes, ARB bush and drop link	Bush kits common
Discovery 2	Live beam axles, coil-sprung, rear Watts linkage	Radius arm, trailing link, panhard rod and Watts linkage bushes, ARB bush and drop link	Bush kits common; ACE (Active Cornering Enhancement) hydraulic anti-roll system on some higher-spec models
Discovery 3 and 4	Independent; double wishbone front and rear	Wishbone and control arm bushes, ARB bush, drop link and bracket	Largest range here
Discovery 5	Independent; double wishbone front, integral-link rear	Control arm and link bushes, ARB bush and drop link	Confirm arm position by VIN
Discovery Sport	Independent; strut-type front, multi-link rear	Front lower arm bush, rear link bushes, ARB bush and drop link	Confirm by VIN
Range Rover Classic	Live beam axles, coil-sprung	Radius arm, panhard rod and A-frame bushes, ARB bush and drop link	Air suspension on late high-spec models, 1992 to 1996
Range Rover P38	Live beam axles, electronic air suspension from factory	Radius arm bushes and front/rear panhard rod bushes, ARB bush and drop link	No central A-frame (P38 uses front and rear Panhard rods to locate the axles); air suspension standard, coil conversions exist
Range Rover L322	Independent; MacPherson strut front, double wishbone rear	Wishbone and link bushes, ARB bush, drop link and complete bar	Confirm by VIN
Range Rover L405, L460	Independent; double wishbone front, integral-link rear	Control arm and link bushes, ARB bush, drop link and complete bar	Dynamic Response active anti-roll bar parts on some models; L405 well stocked
RR Sport L320	Independent; double wishbone front and rear (shares the Discovery 3/4 IBF platform)	Control arm and link bushes, ARB bush, drop link and complete bar	Well stocked
RR Sport L494, L461	Independent; double wishbone front, integral-link rear	Control arm and link bushes, ARB bush, drop link and complete bar	Dynamic Response active anti-roll bar parts on some models; confirm by VIN; L494 well stocked
Freelander 1 and 2	Independent; strut-type front, rear links	Front lower arm bush, rear link bushes, ARB bush and drop link	Confirm by VIN
Range Rover Evoque	Independent; strut-type front, multi-link rear	Front lower arm bush, rear link bushes, ARB bush and drop link	Confirm by VIN
Range Rover Velar	Independent; double wishbone front, integral-link rear	Control arm and link bushes, ARB bush and drop link	Confirm by VIN

Compatibility

Confirming the Right Bush for Your Vehicle

Match the part to your specific vehicle before ordering. Work from the build date and VIN rather than the model year alone, because suspension specification can change mid-production. The VIN plate is on the chassis or under the bonnet depending on model; a VIN or chassis-number search returns the exact suspension build. Confirm three things: the axle, front or rear; the position, such as radius arm, panhard rod or anti-roll bar; and, for anti-roll bar bushes, the bar diameter, since the bush is bored to match the bar and a mismatched inside diameter will not clamp correctly. Some bushes and anti-roll bar parts are handed, position-specific or market and specification-specific, so confirm by VIN before ordering.

Fitting

Common Fitting Notes

Fit pressed-in bushes with the correct press tool or a bush press kit, not a hammer, so the sleeve seats squarely and the rubber is not damaged.
Torque bushed pivot bolts at normal ride height, not on full droop, so the bush is not pre-loaded and does not tear early.
Replace anti-roll bar bushes and drop links in pairs, left and right, so roll stiffness stays even across the axle.
Check the bar diameter and bush bore before ordering. A bush that is too loose will rattle; one that is too tight will bind and wear the bar coating.
Book a wheel alignment if the worn bush was part of an arm that sets camber, caster or toe. Bushes that only locate a panhard rod or anti-roll bar do not usually need a follow-up alignment.

Important

Anti-roll bar and suspension bushes are safety-critical parts that affect handling and stability. Torque all fixings to the correct figure for your model, use the correct press tool for pressed-in bushes, and inspect the ball joint or arm the bush sits in while it is off the vehicle.

Technical Guides

Related Suspension & Steering Parts

Steering Components

Track rod ends, drag links, steering dampers, boxes and power-steering parts.

Land Rover steering components

Coil Springs

Road springs, uprated springs, lift kits and spring seats.

Land Rover coil springs and kits

Ball Joints

Suspension and steering ball joints, boots and fitting kits.

Land Rover ball joints and kits

Axle & Swivel Parts

Swivel kits, stub axles, half shafts and drive flanges.

Land Rover axle and swivel parts

Wheel Bearings & Seals

Hub bearings, wheel hubs, oil seals and taper roller bearings.

Land Rover wheel bearings and seals

FAQ

Land Rover Suspension Bush FAQs

Can I replace a suspension bush without replacing the whole arm?

Often yes. Pressed-in bushes, such as radius arm, panhard rod, trailing arm and anti-roll bar bushes, can usually be pressed out and renewed on their own. Where the bush is moulded integrally into the arm, or the arm itself is bent, corroded or has a worn ball joint, replace the complete arm instead. Check for play at the joint and cracking or splitting in the rubber before deciding.

What is the difference between rubber and polyurethane suspension bushes?

Rubber bushes restore the standard ride and noise levels and are the usual choice for a like-for-like repair. Polyurethane bushes, sold as polybush kits, are often chosen for their durability and reduced compliance under load, which can sharpen handling, though ride comfort, noise and service life vary by compound and application. Off-road and overland builds often fit polyurethane throughout; daily-driven vehicles usually do better on standard rubber.

What do anti-roll bar bushes and drop links do?

The anti-roll bar, or stabiliser bar, links the suspension on both sides of an axle and resists body roll in corners. The bushes mount the bar to the chassis or axle and let it twist, while the drop links connect the bar to the suspension arm at each corner. Worn bushes or drop links show up as clonking over bumps and at low speed, and as vague or less controlled handling in corners.

Are Land Rover suspension bushes sold individually or as a kit?

Both. Many bushes are listed individually so you can replace just the worn part, while polyurethane upgrades are commonly supplied as sets of two or four to renew every bush on an arm or axle in one job. Check the listing for pack quantity before ordering, especially on anti-roll bar bush and drop link kits.

What is the difference between genuine, OEM and aftermarket suspension bushes?

Genuine bushes and anti-roll bar parts carry the Land Rover part number. OEM or OES parts come from original-equipment manufacturers or recognised OE suppliers, and brands such as Lemforder, Delphi, Meyle and BWI may appear as OE, OES or aftermarket depending on the specific item. Aftermarket also covers value and upgrade brands, including Polybush for polyurethane bushes and Terrafirma for off-road hardware.

Can worn suspension bushes throw out my wheel alignment?

It depends which bush. A worn bush in an arm that sets camber, caster or toe, such as a radius arm or wishbone bush, can shift the geometry and is worth checking with a wheel alignment after replacement. Bushes that only locate a panhard rod or anti-roll bar do not directly set alignment angles, but book a check if the ride or handling still feels off after fitting.

Technical content by the Budget Parts workshop team.

Land Rover Suspension Bushes & Anti-Roll Bar Kits

Filters

About Land Rover Suspension Bushes & Anti-Roll Bar Kits

Choosing the Right Bush: Rubber or Polyurethane

Model Fitment Scope

Confirming the Right Bush for Your Vehicle

Common Fitting Notes

Related Technical Reading

Baja España Aragón Defender Guide

Defender 90 Maroc Challenge Prep

Related Suspension & Steering Parts

Steering Components

Coil Springs

Ball Joints

Axle & Swivel Parts

Wheel Bearings & Seals

Land Rover Suspension Bush FAQs