Land Rover Wheel Accessories

Land Rover wheel accessories cover the smaller fitting and finishing parts that go around the wheel rather than the wheel itself: centre caps and hub caps, wheel spacers, tyre pressure sensors, balancing beads, valve hardware and inner tubes. This page brings them together for Series, Defender, Discovery, Range Rover and Freelander owners, so you can find the part that completes a wheel without scrolling past full wheels and nuts. Complete wheel hub assemblies and bearings are drivetrain parts and sit in Land Rover Suspension Parts, not here. Some parts are universal, while centre caps, spacers and sensors are matched to the wheel or vehicle, so check the fit before ordering. Everything here is stocked across our Dutch warehouse network for EU dispatch.

Sort by

View as

LR069899LR - Wheel Centre Cap – Black

- €22,50

€22,50

€22,50 - €22,50

€22,50

Genuine

15 in stock

Wheel Centre Cap - a black alloy-wheel centre cap carrying the Land Rover oval in green and silver. It presses into the centre bore of an alloy wh...

View full details

TF303B - Wheel Spacer Set – 30mm – Black

- €210,00

€210,00

€210,00 - €210,00

€210,00

OEM

Only 1 left!

Wheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...

View full details

LR094546 - Wheel Centre Cap – Titan Silver – Set of 4

- €57,50

€57,50

€57,50 - €57,50

€57,50

Genuine

5 in stock

Wheel Centre Cap - set of four alloy wheel centre caps in Titan Silver. The centre cap clips into the hub bore of an alloy wheel, covering the hub...

View full details

LR081538 - Wheel Hub Assembly

- €107,00

€107,00

€107,00 - €107,00

€107,00

Aftermarket

2 in stock

Wheel Hub Assembly for the front and rear axle knuckle assembly. This wheel hub assembly mounts to the steering or rear knuckle and houses the whe...

View full details

LR094547 - Wheel Cover – Bright Black – Set of 4

- €78,00

€78,00

€78,00 - €78,00

€78,00

Genuine

Only 1 left!

Wheel Centre Cover fits into the central hub bore of an alloy wheel, concealing the hub and wheel-mounting hardware behind a finished cap that clip...

View full details

LR070840G - Sensor - Tyre Pressure Monitoring by VDO Land Rover Range Rover

LR070840G - Tyre Pressure Sensor – TPMS – 433 MHz

- €80,10

€80,10

€80,10 - €80,10

€80,10

OEM

Available to order: 2-3 weeks delivery

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

View full details

RRE000010G - Tyre Pressure Sensor – TPMS

- €29,20

€29,20

€29,20 - €29,20

€29,20

OEM

Available to order: 2-3 weeks delivery

Tyre Pressure Sensor - component of the tyre pressure monitoring system (TPMS). Monitors tyre inflation pressure and transmits the reading by radi...

View full details

LR156918G - Sensor - Tyre Pressure Monitoring by PR2 Allmakes OE Land Rover Range Rover

LR156918G - Tyre Pressure Sensor – 433 MHz – TG1D

- €90,20

€90,20

€90,20 - €90,20

€90,20

OEM

Available to order: 2-3 weeks delivery

Tyre Pressure Sensor - wheel-mounted sensor forming part of the Tyre Pressure Monitoring System (TPMS). The sensor is fitted at the valve position...

View full details

LR156918LR - Sensor - Tyre Pressure Monitoring by LAND ROVERElectrical Part Land Rover Range Rover

LR156918LR - Tyre Pressure Sensor – TPMS – 433 MHz

- €147,10

€147,10

€147,10 - €147,10

€147,10

Genuine

Available to order: 2-3 weeks delivery

Tyre Pressure Sensor - wheel-mounted pressure and temperature sensor for the Tyre Pressure Monitoring System (TPMS). Mounted at the valve position...

View full details

LR130610LR - Cover - Wheel by LAND ROVERWheel System Part Land Rover Range Rover

LR130610LR - Wheel Centre Cap – Steel

- €22,50

€22,50

€22,50 - €22,50

€22,50

Genuine

Available to order: 2-3 weeks delivery

Wheel Centre Cap - hub cover for modular steel road wheels. It press-fits into the centre bore of the wheel, covering the hub flange and keeping d...

View full details

LR094547LR - Cover - Wheel by LAND ROVERWheel System Part Land Rover Range Rover

LR094547LR - Wheel Cover

- €86,10

€86,10

€86,10 - €86,10

€86,10

Genuine

Available to order: 2-3 weeks delivery

Wheel Cover for the road wheel. The cover fits over the wheel to give a finished appearance and shield the wheel face from road dirt and brake dus...

View full details

LR094546LR - Cover - Wheel by LAND ROVERWheel System Part Land Rover Range Rover

LR094546LR - Wheel Cover

- €86,10

€86,10

€86,10 - €86,10

€86,10

Genuine

Available to order: 2-3 weeks delivery

Wheel Cover set, fitted over the road wheels. The covers clip over the wheels to give a finished appearance and shield the wheel face from road di...

View full details

LR070840LR - Sensor - Tyre Pressure Monitoring by LAND ROVERElectrical Part Land Rover Range Rover

LR070840LR - Tyre Pressure Sensor – TPMS – 433 MHz

- €190,00

€190,00

€190,00 - €190,00

€190,00

Genuine

Available to order: 2-3 weeks delivery

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

View full details

LR070840 - Sensor - Tyre Pressure Monitoring by VDOElectrical Part Land Rover Range Rover

LR070840 - Tyre Pressure Sensor – TPMS – 433 MHz

- €75,00

€75,00

€75,00 - €75,00

€75,00

OEM

Available to order: 2-3 weeks delivery

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

View full details

LR069900LR - Wheel Cover

- €22,50

€22,50

€22,50 - €22,50

€22,50

Genuine

Available to order: 2-3 weeks delivery

Wheel Centre Cap for the alloy road wheel. This cover fits to the hub centre of the alloy wheel, closing off the centre bore and completing the wh...

View full details

TF303 - Wheel Spacer Set – 30mm – Alloy

- €200,00

€200,00

€200,00 - €200,00

€200,00

OEM

Available to order: 2-3 weeks delivery

Wheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...

View full details

Sold out

LR031712 - TPMS Sensor Kit

- €89,00

€89,00

€89,00 - €89,00

€89,00

OEM

Out of stock

Tyre Pressure Monitoring Sensor (TPMS), a 433 MHz wheel-mounted unit that fits to the valve inside each road wheel. It measures tyre pressure and t...

View full details

About Land Rover wheel accessories

This collection holds the parts that sit alongside a wheel rather than the wheel and its fixings. That means centre caps and hub caps that cover the centre bore, wheel spacers that push the wheel outward for clearance or a wider track, tyre pressure monitoring sensors on models fitted with them, balancing beads and weights, valve caps and stems, and inner tubes for steel wheels. The wheels themselves, and the nuts and studs that hold them on, sit in their own sections, so this page stays focused on the finishing and fitting parts. It covers Land Rover and Range Rover from the Series and classic Defender through to the later Discovery and Range Rover ranges.

What fits which wheel

A few of these parts are broadly interchangeable. Balancing beads, valve caps and most valve hardware are not tied to a particular model. The rest are matched to the wheel or the vehicle. Centre caps are sized to the wheel's centre bore and to the badge style, so a cap for a steel wheel will not suit a later alloy. Wheel spacers are matched to the hub stud pattern and centre bore, and add a fixed amount of track each side. Tyre pressure sensors are matched to the model, year and radio frequency the vehicle expects. Inner tubes are sized to the wheel and tyre. When a part is size or model dependent, confirm it against your wheel or vehicle before ordering.

Choosing the right part

The quickest way to get the right accessory is to work from the wheel you already have. For a centre cap, measure the opening it pushes into, or quote the part number stamped on the old cap. For a spacer, you need the stud pattern and centre bore of your hub, plus the thickness you want. For a tyre pressure sensor, your model and build year decide the correct type, since fitment changed across generations and left and right hand drive markets. If you are replacing like for like, matching the new part to the old one is the safest check.

Related categories

Frequently asked questions

What counts as a Land Rover wheel accessory?

It is the group of parts that go around a wheel rather than the wheel itself or the nuts that hold it on. That includes centre caps and hub caps, wheel spacers, tyre pressure monitoring sensors, balancing beads and weights, valve caps and stems, and inner tubes. Complete wheels sit in road wheels and spares, and the fixings sit in wheel nuts and locks.

Will Land Rover centre caps fit my wheels?

Centre caps are sized to the centre bore of the wheel and to the badge style, so they are not universal across the range. A cap made for a steel wheel will not suit a later alloy, and sizes changed across models. The safest approach is to measure the opening the cap pushes into, or to quote the part number on your existing cap, before ordering.

How do I choose the right wheel spacers?

Wheel spacers are matched to your hub by stud pattern and centre bore, and they add a set amount of track on each side based on their thickness. Choose the spacer that matches your hub fitment and the clearance you need, and check that your wheel nuts or longer studs still give full thread engagement once fitted. Local road rules on track width and spacers vary, so confirm what is permitted where you drive.

Do tyre pressure sensors need to match my model?

Yes. Tyre pressure monitoring sensors are matched to the model, build year and the radio frequency the vehicle expects, which is typically 433 megahertz on European Land Rover and Range Rover models. A sensor from the wrong generation may not pair with the vehicle, so confirm the correct type against your model and year before ordering.

Which wheel accessories are universal?

Balancing beads, valve caps and most valve hardware are not tied to a specific model, so they suit the range broadly. Centre caps, spacers, tyre pressure sensors and inner tubes are size or model dependent and should be matched to your wheel or vehicle.

Budget Parts. Land Rover and Range Rover wheel accessories, stocked in the Netherlands for EU dispatch.

Land Rover Wheel Accessories

Filters (1)

LR069899LR - Wheel Centre Cap – Black

TF303B - Wheel Spacer Set – 30mm – Black

LR094546 - Wheel Centre Cap – Titan Silver – Set of 4

LR081538 - Wheel Hub Assembly

LR094547 - Wheel Cover – Bright Black – Set of 4

LR070840G - Tyre Pressure Sensor – TPMS – 433 MHz

RRE000010G - Tyre Pressure Sensor – TPMS

LR156918G - Tyre Pressure Sensor – 433 MHz – TG1D

LR156918LR - Tyre Pressure Sensor – TPMS – 433 MHz

LR130610LR - Wheel Centre Cap – Steel

LR094547LR - Wheel Cover

LR094546LR - Wheel Cover

LR070840LR - Tyre Pressure Sensor – TPMS – 433 MHz

LR070840 - Tyre Pressure Sensor – TPMS – 433 MHz

LR069900LR - Wheel Cover

TF303 - Wheel Spacer Set – 30mm – Alloy

LR031712 - TPMS Sensor Kit

About Land Rover wheel accessories

What fits which wheel

Choosing the right part

Related categories

Frequently asked questions

Added to your cart: