for Discounts / VAT
for Discounts & Correct VAT
Replacement parts for the Land Rover Defender L663, the current-generation Defender produced from 2020 to present. Covers all three body variants in OEM, Genuine, and aftermarket quality.
For Classic Defender parts (pre-2016), see Land Rover Defender parts.
Mass Air Flow Sensor in the engine air intake system, fitted in the intake tract between the air filter and the throttle and turbocharger inlet. It...
View full detailsOil Cooler, part of the engine lubrication system. It draws heat out of the engine oil to hold oil temperature within its operating range under su...
View full detailsDrive Belt Tensioner for the accessory drive belt system of the 2.0L I4 Ingenium (AJ200 / AJ20) petrol and diesel engine. This is a double belt te...
View full detailsSpare Wheel Cover, semi-rigid moulded construction, matt black. The cover fits over the rear-mounted spare wheel and holds its own shape rather th...
View full detailsRear Access Ladder giving step access from the rear bumper up to the roof rack platform. Constructed from 25 mm black powder-coated steel tube wit...
View full detailsSpare Wheel Cover in a gloss black and silver finish, for the tailgate-mounted spare wheel. Shields the spare tyre from sunlight, road dirt and st...
View full detailsSpare Wheel Cover finished in matt black with silver detailing. Fits over the externally mounted spare wheel to shield the tyre and rim from ultra...
View full detailsTransmission Oil Pan and Filter for the ZF 8HP 8-speed automatic transmission (8HP45 and 8HP70, and the later 8HP51/8HP76 variants). The pan bolts...
View full detailsFront Brake Disc, 349 mm diameter, part of the front service brake assembly. The disc mounts to the front wheel hub and provides the friction surf...
View full detailsFront Lower Suspension Arm (wishbone) for the left-hand side of the front independent suspension, locating the lower end of the wheel knuckle again...
View full detailsFront Wheel Hub - hub and integrated wheel bearing unit for the front knuckle assembly. The hub carries the road wheel and brake disc and is drive...
View full detailsCamshaft Sprocket is a timing-drive gear in the valve train of the 2.0L Ingenium diesel engine (AJ200D). Mounted on the end of the camshaft, it is...
View full detailsFront Upper Suspension Arm, right-hand side - the upper wishbone of the front double-wishbone suspension assembly. The upper arm locates the top o...
View full detailsWater Pump for the 2.0L Ingenium diesel engine (AJ20D4), part of the engine cooling circuit. Belt- or chain-driven from the engine, the pump circu...
View full detailsFront Shock Absorber - Left Hand - damper unit for the left-hand front corner of vehicles equipped with four-corner electronic air suspension. It ...
View full detailsWater Pump for the 2.0L Ingenium diesel engine (AJ20D4), part of the engine cooling circuit. Belt- or chain-driven from the engine, the pump circu...
View full detailsStarter Motor
Fuel Injector for the 3.0L AJ20D6 Ingenium six-cylinder diesel engine in high-output specification, part of the high-pressure common rail fuel inje...
View full detailsRear Brake Discs, 350 mm diameter, supplied as a pair - rear foundation brake assembly, 19 disc and caliper size. The discs locate on the rear hub...
View full detailsBrake Vacuum Pump, the auxiliary vacuum source for the brake servo on petrol engines. Petrol engines - particularly direct-injection and superchar...
View full detailsFront Upper Suspension Arm, left-hand side - the upper wishbone of the front double-wishbone suspension assembly. The upper arm locates the top of...
View full detailsDisc - Brake (Pair)
Radiator is the primary heat exchanger of the Engine Cooling System, transferring heat from the engine coolant to the air drawn through the front c...
View full detailsWater Pump for the 2.0L Ingenium four-cylinder engine (AJ200), part of the engine cooling circuit. Driven from the engine, the pump circulates coo...
View full detailsFront Shock Absorber - Right Hand - damper unit for the right-hand front corner of vehicles equipped with four-corner electronic air suspension. I...
View full detailsBypass Tube for the engine cooling circuit, forming part of the coolant routing on the engine. The tube carries coolant along its bypass path so c...
View full detailsFront Shock Absorber - right-hand front damper for the long-wheelbase chassis with four corner air suspension. It controls wheel and body movement...
View full detailsWater Pump for the 2.0L Ingenium four-cylinder engine (AJ200), part of the engine cooling circuit. Driven from the engine, the pump circulates coo...
View full detailsRear Brake Discs, supplied as a pair, part of the rear service brake assembly. Each disc mounts to the rear wheel hub and provides the friction su...
View full detailsWater Pump for the engine cooling circuit, circulating coolant between the cylinder block, cylinder head and radiator. Driven off the engine, the ...
View full detailsEGR Valve and Throttle Body Assembly from the engine's exhaust gas recirculation and intake system. The EGR valve meters recirculated exhaust gas b...
View full detailsWater Pump for the 2.0L Ingenium diesel engine (AJ20D4), part of the engine cooling circuit. Belt- or chain-driven from the engine, the pump circu...
View full detailsAir Conditioning Condenser - front-mounted condenser for the air conditioning refrigerant circuit, specified for 3.0L AJ20P6 petrol and 3.0L AJ20D6...
View full detailsCap - Filler
Air Conditioning Condenser - front-mounted condenser for the air conditioning refrigerant circuit, specified for 3.0L AJ20D6 diesel, 3.0L AJ20P6 pe...
View full detailsFuel Pump - high-pressure, engine-mounted fuel injection pump within the direct-injection fuel system on petrol engines. Driven off the engine, it...
View full detailsFuel Pump - high-pressure, engine-mounted fuel injection pump within the direct-injection fuel system on petrol engines. Driven off the engine, it...
View full detailsFuel Tank Filler Cap - Petrol/PHEV seals the fuel filler neck on petrol and plug-in hybrid (PHEV) fuel systems. It closes the filler neck to conta...
View full detailsFuel Tank Filler Cap for the fuel filler system on petrol and plug-in hybrid (PHEV) applications. Threads onto the filler neck at the top of the f...
View full detailsMass Air Flow (MAF) Sensor for the engine air intake system. Installed in the intake tract downstream of the air filter, the sensor measures the m...
View full detailsAlternator for the engine charging system. Driven by the auxiliary drive belt, it generates the electrical power that charges the battery and suppl...
View full detailsSteering Guard in 6 mm aluminium plate with a powder-coated silver finish, forming part of the front underbody protection assembly. It shields the...
View full detailsWinrace Alloy Wheel - 8x18 - Anthracite - 18" aluminium alloy road wheel in an anthracite finish. 8" rim width, ET42 offset, 5x120 PCD, 72.6 mm cen...
View full detailsWinrace Alloy Wheel - 8x18 - Black - 18" aluminium alloy road wheel in a black finish. 8" rim width, ET42 offset, 5x120 PCD, 72.6 mm centre bore, r...
View full detailsSteering Guard in 6 mm aluminium plate with a powder-coated black finish, forming part of the front underbody protection assembly. It shields the ...
View full detailsAir Suspension Compressor - the compressor unit that supplies pressurised air to the four-corner air suspension system. It draws in and compresses...
View full detailsEGR Valve Assembly for the high-pressure exhaust gas recirculation circuit on the 2.0-litre AJ200 diesel engine. The assembly combines the EGR valv...
View full detailsWater Pump for the 3.0L AJ200P inline-6 petrol engine cooling system. Driven by the engine, this pump circulates coolant through the cylinder bloc...
View full detailsThe Land Rover Defender L663 is the current-generation Defender, built on Land Rover's D7x aluminium unibody architecture and produced in Nitra, Slovakia from 2020 to present. It is available in three body configurations: the Defender 90 (3-door), the Defender 110 (5-door), and the Defender 130 (5-door extended, 8-seat). The L663 shares no body panels, drivetrain components, or structural parts with the Classic Defender (L316) that preceded it. Parts from the Classic Defender range do not fit the L663.
Reference note: official L663 technical specifications are available via the Land Rover Media Centre technical data archive.
Fitment NotesThe L663 is available with a range of petrol and diesel engines from the AJ200 and AJ300 Ingenium families, alongside a plug-in hybrid variant. The engine fitted to your vehicle determines which fuel system, cooling, ancillary, and filtration parts are compatible. Before ordering engine parts, confirm your engine variant from your VIN plate or vehicle registration document.
Petrol variants:
Diesel variants:
The P400e PHEV uses a high-voltage battery system and an additional electric motor alongside the combustion engine. Braking, cooling, and driveline components on P400e models differ from those on standard petrol and diesel variants. If your vehicle is a P400e, confirm the specific component requirement for your variant before selecting parts.
All L663 variants use a ZF 8-speed automatic transmission with a 2-speed transfer case providing permanent four-wheel drive.
Suspension FitmentThe Defender 110 and Defender 130 are fitted with air suspension as standard across all variants. The Defender 90 is available with either air suspension or coil springs depending on specification. Air suspension components and coil spring components are not interchangeable. Before ordering any suspension part for a Defender 90, confirm whether your vehicle has air or coil suspension. This information is available on your VIN plate and in your vehicle handbook.
Buying GuideParts in this collection are marked as OEM, Genuine, or Aftermarket. The distinction matters for fitment decisions and budget planning.
Genuine parts are produced by Land Rover or its authorised supply chain and carry the Land Rover part number. They are the closest match to factory specification.
OEM parts are produced by the same manufacturers that supply Land Rover's production line, but sold outside the Genuine parts programme. They meet the same manufacturing standards as Genuine parts in most cases and are typically priced lower.
Aftermarket parts are produced by independent manufacturers to fit the L663 platform. Quality varies by brand and application. For safety-critical systems including brakes, steering, and suspension, Budget Parts stocks aftermarket parts from established brands only.
If your vehicle is within a valid Land Rover warranty period, confirm with your dealer whether fitting aftermarket or OEM parts affects your warranty before ordering.
The L663 has been in production since 2020 and has received specification updates across model years. If you are ordering a part and are unsure whether it matches your build, your 17-digit VIN is the most reliable reference. The VIN is stamped on the door sill plate, the windscreen base, and the vehicle registration document. The VIN encodes your model year, engine variant, body style, and build market, which allows Budget Parts to confirm part compatibility before you order.
If you cannot find the part you need in this collection, use the backorder option. Budget Parts will source the part from its supplier network and notify you when it is ready to dispatch.
Technical GuidesThe following guides provide deeper technical context for Defender L663 ownership, service planning, and parts selection.
Known failure areas across the Defender range including L663 fitment considerations, common parts requirements by variant, and what EU owners and workshops should verify before ordering.
Defender parts Europe 2025 →The diagnostic process for overheating on Land Rover Ingenium engines, including the cooling system components most likely to require replacement. Relevant to L663 owners with D300 or P400 engines.
Land Rover overheating diagnosis →For component-specific browsing, the following category collections cover L663-compatible parts alongside other Land Rover models.
Brake discs, pads, callipers, and full brake system components for Defender L663 and the wider Land Rover range.
Land Rover brake parts →Air suspension and coil spring components, shock absorbers, bushes, and suspension fitting hardware.
Land Rover suspension parts →AJ200 and AJ300 Ingenium engine service parts, ancillaries, gaskets, and rebuild components.
Land Rover engine parts →Sensors, modules, wiring components, and electrical ancillaries for current-generation Defender models.
Land Rover electrical parts →No. The Defender L663 (2020 to present) is built on the D7x aluminium unibody platform and shares no structural, body, or drivetrain components with the Classic Defender (L316), which was produced from 1983 to 2016. Parts designed for Classic Defender models will not fit the L663. If you own a pre-2016 Defender, use the Classic Defender parts collection.
Yes, in some categories. The three body variants share the same D7x platform and powertrain options, but differ in wheelbase, body length, interior configuration, and in some cases suspension setup. The Defender 90 can be specified with either air suspension or coil springs, while the 110 and 130 come with air suspension as standard. Rear-end body parts, interior trim components, and some suspension parts are body-variant specific. Always confirm your body variant and build specification before ordering.
The most reliable method is your 17-digit VIN, which can be decoded to identify your engine variant, model year, and market specification. The VIN is located on the door sill plate, the base of the windscreen, and your vehicle registration document. Your vehicle handbook also lists the engine code on the specification page. For diesel models, the AJ200D (4-cylinder) and AJ300D (6-cylinder) engines have different service part requirements. For petrol models, the P400e PHEV has additional electric drivetrain components not present on the P300 or P400.
Genuine parts carry the Land Rover part number and are produced by Land Rover's authorised supply chain. OEM parts are produced by the same manufacturers that supply Land Rover's production line but sold outside the Genuine programme, typically at a lower price. Aftermarket parts are produced by independent manufacturers to fit the L663. For safety-critical components including brakes, suspension, and steering, Budget Parts stocks aftermarket parts from established brands. Each product listing on this page states its quality classification.
Yes. If a part is not currently in stock, the backorder option is available on the product listing. Budget Parts will source the part from its supplier network and contact you with an update once the part is located and ready. This covers both OEM and Genuine parts that may have longer lead times due to supply chain availability.
Yes, in certain categories. The P400e uses a 2.0-litre AJ200 petrol engine combined with a high-voltage electric motor and a 13.1 kWh battery system. Components related to the braking system (which includes regenerative braking), high-voltage battery cooling, and the electric drivetrain are specific to the P400e and differ from those on the standard P300 and P400 petrol variants. If your vehicle is a P400e, confirm the exact component specification with Budget Parts before ordering parts in these categories.
Updated: 6 May 2026