Range Rover Classic Parts

Relay - 12V automotive changeover relay with a 30A contact rating, twin make. The five-pin configuration provides two normally-open contacts, allo...

screw M5 x 12

Hex-head screw, 5/16" UNF thread, 1-1/4" long. Unified Fine (UNF) thread form with a hexagonal head for use with standard imperial spanners and so...

Wheel spacer kit fitted between the wheel hub and road wheel within the wheel mounting assembly. The spacers move the wheel mounting face outward...

30mm alloy wheel spacer set designed to position the wheel further outward from the hub assembly. The spacers are manufactured from alloy and supp...

Rear Shock Absorber provides damping control on the rear axle for suspension set up with approximately 50 mm of additional travel. Twin-tube const...

Static Lap Seat Belt for the second-row seating position, forming part of the interior occupant restraint system. The non-retractable, fixed-lengt...

Split Pin - a 1.5mm x 12mm cotter pin used to lock a slotted (castle) nut or to retain a clevis pin. Passed through a drilled cross-hole in the sh...

Front Shock Absorber Turrets - Pair are the tubular mounting towers that locate the upper end of the front dampers in the front suspension. They b...

Tow Ball 50mm flange-fixing tow ball for use with a bolt-on tow bar drop plate. Rated for a maximum gross trailer weight of 3.5 tonnes, with a D-v...

Shock Dropper - Rear - Pair: zinc-plated steel relocated rear shock absorber top mounts that lower the upper mounting point by 50mm. By relocating...

Transfer Box Output Mud Shield Shield that fits over the transfer box output flange to protect the output shaft oil seal from mud, water and debris...

Steering Wheel is a 15-inch three-spoke replacement wheel that mounts to the steering column. It is supplied without a boss, so a separate fitting...

Modular Steel Wheel - Black - 7J x 16 A modular steel road wheel finished in black, sized 7J x 16 with an ET08 offset. The steel construction suit...

M12 Nut used as a fastener at several chassis and running-gear locations, including the swivel pin housing, drive shaft fixings and front brake cal...

Return to Centre Steering Damper for installation within the steering linkage assembly. This unit mounts between the axle steering arms and the st...

Coil Spring - Front - +2" Light Duty is a front suspension coil spring providing approximately 50mm (2 inches) of lift above the standard ride heig...

Steel Road Wheel is a welded steel road wheel with a 6.5 x 16 inch rim, finished in black with a Wolf-style profile for road use with tubeless tyre...

Upgrade or replace your steering wheel boss with this high-quality 36-tooth adapter, designed specifically for Land Rover Defender to 1991 90/110 v...

Shock Absorber - Front - +2" Travel for the front coil spring suspension system, designed for use with a 2-inch suspension lift. The extended-trav...

heavy duty spring front RR/disco pair, like DA4201 and TF014.

Steering Damper - 4-Stage Adjustable for Land Rover Defender 90, 110, and 130. This hydraulic steering damper mounts between the axle and chassis ...

High-Tensile Bolt - 1/2" UNF x 3" for use in Land Rover chassis, body, and mechanical assemblies where a 1/2" UNF thread and 3" length is specified...

Tow Ball – 50 mm a black-finished towing ball for flange-type towing brackets. The ball bolts to the face of the towing bracket on the standard tw...

Range Rover Classic Parts Catalogue covering the 1970 to 1985 model years. It reproduces the factory parts catalogue, listing part numbers with des...

Hook & Loop Fastening Strap for securing and bundling loose items within the vehicle interior, cargo area, or workshop. The strap wraps around ...

Wheel Nuts - set of five, sufficient to secure one wheel. The nuts are sized for the MaxXtrac Mach 5 alloy wheel, giving the correct seat and thre...

Electronic Differential Lock (E-Locker) replaces the standard open differential assembly within the axle, providing driver-selectable full differen...

Steering Damper Relocation Kit enables the steering damper to be repositioned from the track rod to the drag link - the mounting position used on t...

Front Spring Spacers fit between the front axle and the base of the front coil spring to raise the spring mounting point. The spacers are 50mm (2 ...

Twin Shock Mount Kit - Rear provides the additional mounting points required to run twin rear shock absorbers on each side of the rear axle. The ad...

Suspension Kit providing 2 inches of lift in a heavy load configuration, combining rated coil springs with All Terrain shock absorbers. The heavy ...

All Terrain Light Load Suspension Kit 90/D1/RRC TERRA FIRMA

Shock Absorber for the rear coil spring suspension system. This big-bore unit is designed for heavily laden and expedition applications where sust...

Big Bore Expedition Shock Absorber - front position, standard ride height. The damper installs between the front axle mounting and the chassis bra...

Terrafirma medium load rear springs (pair) 90/D1/RRC

Tow Slider - Adjustable Saddle Type for the Dixon Bate adjustable tow bracket system. This is the vertically sliding saddle piece in the Dixon Bat...

Wind Deflectors - Set of 4 - RRC

Switch mounting bracket for a single differential lock switch, forming part of the electric locking differential control circuit. The bracket give...

Differential Guard - 5 mm steel underbody guard that shields the differential housing and nose-piece from impact damage on rock and rutted ground. ...

Wading Kit for the axle and transmission breather circuit on V8 applications. The axle, gearbox and transfer casings vent to atmosphere through br...

Steering guard in zinc-plated steel, part of the underbody protection group. It bolts beneath the front of the chassis to shield the steering box,...

Extended Wheel Arch Set - a set of four oversize wheel arch extensions for three-door bodywork, standing 2in (50 mm) wider than the standard arches...

Extended Wheel Arch Set - a set of four oversize wheel arch extensions for five-door bodywork, standing 2in (50 mm) wider than the standard arches....

Steering guard in 8 mm alloy, part of the underbody protection group. It mounts beneath the front of the chassis on steel side brackets and shields...

Terrafirma mega sport XT 11"" travel dislocation kit for 90/D1/RRC