Range Rover Evoque Parts

Inlet Manifold distributes charge air from the intake system to the cylinder head inlet ports. Fitted to the 2.2L Td4 (DW12) diesel engine, it rou...

Fuel Injector for the 2.0L I4 Ingenium (AJ200) diesel engine, part of the high-pressure common rail fuel injection system. The injector is clamped...

NOx Trap Temperature Sensor for the exhaust aftertreatment system, mounted in the exhaust stream at the NOx trap. The sensor measures exhaust gas ...

Flywheel for the 2.2L 16V common-rail turbo-diesel engine (DW12). It bolts to the rear flange of the crankshaft and carries the starter ring gear ...

Combined Oil and Vacuum Pump for the 2.0L Ingenium (AJ200) petrol and diesel engines. This tandem unit houses the engine oil pump and the vacuum pu...

Turbocharger Actuator for the 2.2L diesel engine's forced-induction system. It adjusts the turbocharger's variable-geometry mechanism to regulate b...

Turbocharger Assembly for the 2.2L diesel engine, part of the forced-induction system. Exhaust gas drives the turbine, which spins a compressor whe...

Turbocharger Assembly for the 2.0L 16V TiVCT GTDI turbocharged petrol engine (240PS). The turbocharger forms part of the forced-induction system, r...

Flywheel Drive Plate for automatic transmission applications. This drive plate bolts to the engine crankshaft and couples it to the torque convert...

Diesel Particulate Filter - the front catalyst and particulate filter unit of the exhaust aftertreatment system, for the 2.0L AJ200 Ingenium four-c...

Turbocharger for the 2.0L AJ200 / AJ20D4 four-cylinder diesel engine. It sits in the forced-induction circuit between the exhaust manifold and the...

Transmission Oil Cooler Hose for the automatic transmission fluid cooling circuit. The hose carries automatic transmission fluid between the gearb...

EGR Outlet Gasket for the exhaust gas recirculation (EGR) system of the 2.0L AJ200-series four-cylinder diesel engine. Seals the outlet joint of t...

Manifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...

Manifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...

Engine Oil Drain Plug for the 2.0L 16V Ti-VCT petrol engine. It threads into the drain point at the base of the oil sump, sealing the lubrication s...

Glow Plug is a heating element threaded into the cylinder head of the 2.2L CR DI diesel engine, forming part of the pre-heating system. One plug s...

Water Pump for the engine cooling circuit. The pump circulates coolant through the cylinder block, cylinder head and radiator to maintain engine op...

Camshaft Oil Seal (Front) for the 2.2L DW12 Td4 diesel engine, fitted where the camshaft exits the front of the cylinder head. The seal runs on th...

Camshaft Oil Seal (Front) for the 2.2L DW12 Td4 diesel engine, fitted where the camshaft exits the front of the cylinder head. The seal runs on th...

MAP Sensor (Manifold Absolute Pressure sensor) in the engine air intake system. The sensor measures the absolute pressure within the intake manifol...

MAP Sensor (Manifold Absolute Pressure sensor) in the engine air intake system. The sensor measures the absolute pressure within the intake manifol...

Connecting Rod Bearing Set provides the replaceable big-end bearing shells that locate between the connecting rods and the crankshaft journals, car...

Pump - Oil & Vacuum

Bearing Con Set Rods

Bearing Con Set Rods

Drive Belt for the ancillary drive on the 2.0L 16V TiVCT turbocharged Petrol. This belt drives the engine-mounted accessories from the crankshaft ...

Crankshaft Front Oil Seal seals the crankshaft nose at the front of the 2.2L TD4 diesel engine. It runs on the crankshaft snout where it passes th...

Thermostat Housing Gasket for the engine cooling system. It seals the joint between the thermostat housing and the engine, containing coolant and ...

Intercooler Hose forms part of the charge-air ducting on the 2.2L diesel engine. It connects the turbocharger outlet to the intercooler, carrying ...

Vacuum Pump Seal - the sealing ring for the engine-mounted vacuum pump. The vacuum pump generates the vacuum used by the brake servo; this seal cl...

Exhaust gas recirculation valve

Cam Cover Gasket - seals the camshaft cover to the cylinder head on the 2.2L TD4 diesel engine (DW12). It forms the oil-tight joint at the top of ...

Gasket - 2.0tcie Head No Set-H

Piston Ring Set in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The rings seal the combustion chamber against the...