Range Rover Parts

Coolant Bleed Hose for the engine cooling system of the 4.4L V8 turbo-diesel (TDV8) engine. The hose forms part of the cooling-system bleed circui...

Rear Mud Flaps - moulded flaps fitted at the trailing edge of the rear wheel arches, at the lower body. Each flap hangs behind the rear tyre to in...

Air-Conditioning O-Ring, 11 x 2.5 mm for the refrigerant circuit. The seal is fitted at the compressor-to-condenser connection, holding a leak-tig...

Ride Height Sensor Assembly for the rear right-hand suspension, forming part of the automatic headlamp levelling system. It measures the rear susp...

Front Brake Caliper Attachment Kit - the caliper fitting hardware for the front disc brake assembly. The kit contains the brake pad clips and the ...

Shock Absorber Bracket in the rear suspension. It locates and secures the rear shock absorber, providing the mounting point that ties the damper t...

Sealing Washer for the 4.4L DOHC DITC V8 diesel (TDV8). Seals a connection at the right-hand (primary) turbocharger. Renew on reassembly to ensure...

EGR Cooler Gasket for the exhaust gas recirculation (EGR) circuit of the 4.4L DOHC V8 turbo-diesel (TDV8) engine. The gasket seals the joint betwe...

Coolant Expansion Tank for the 5.0L V8 petrol (AJ133), both naturally aspirated and supercharged. Part of the engine cooling system, it accommodat...

Oil Filter Housing Cover for the 4.4L DOHC DITC V8 diesel (TDV8). Closes the oil filter housing within the oil cooler and filter assembly, retaini...

EGR Inlet Gasket for the 4.4L DOHC DITC V8 diesel (TDV8). Seals the inlet joint of the exhaust gas recirculation (EGR) circuit, between the exhaus...

Ride Height Sensor for the electronic air suspension system, monitoring front ride height. The sensor links to the front suspension arm and report...

Gasket for the outlet joint of the Exhaust Gas Recirculation (EGR) system on the 4.4L DOHC V8 turbo diesel (TDV8) engine. Seals the EGR outlet con...

Idler Pulley for the auxiliary (accessory) drive belt on the 4.4L DOHC V8 turbo diesel (TDV8) engine. Guides the auxiliary drive belt and maintain...

Oil Filter for the 4.4L V8 turbo-diesel engine, part of the engine lubrication system. This is a replaceable filter element that fits the engine o...

Sensor Assembly

Auxiliary Drive Belt Tensioner for the 4.4L DOHC DITC V8 diesel engine. Maintains correct tension on the auxiliary drive belt, applying a controll...

Damper Mounting Bush - Polyurethane - Lower - polyurethane isolating bush for the lower shock absorber mounting. The bush sits between the damper ...

Exhaust Gasket for the front exhaust system on the 4.4L DOHC DITC V8 diesel engine. Seals the connection between the secondary turbocharger outlet...

Exhaust Manifold Gasket for the 4.4L DOHC V8 turbo-diesel engine. It seals the joint between the cylinder head exhaust ports and the exhaust manif...

EGR Gasket for the exhaust gas recirculation (EGR) system on the 4.4L DOHC DITC V8 diesel engine. Seals the joint between the exhaust manifold and...

EGR Gasket seals the joint between the EGR valve and the inlet manifold within the exhaust gas recirculation system. It maintains a gas-tight seal...

Turbocharger Oil Return Tube Gasket seals the oil return (drain) tube where it meets the turbocharger, within the turbocharger lubrication circuit....

Exhaust Manifold Gasket for the 4.4L DOHC V8 turbo-diesel (TDV8) engine. It seals the joint between the exhaust crossover pipe and the exhaust mani...

Heater Line Coolant Hose for the 4.4L DOHC V8 turbo-diesel (TDV8) engine. Supplied with its connector, it carries coolant to the heater circuit fee...

EGR Gasket for the 2.2L diesel engine, part of the exhaust gas recirculation (EGR) system. Seals a joint in the EGR circuit, maintaining a gas-tig...

Ignition Coil for the 4.4L V8 petrol engine (M62 B44), part of the ignition system. Mounted directly over the spark plug in a coil-on-plug arrange...

Fuel Sender Flange for the fuel tank pump, sender and filler assembly. This flange seats over the fuel level sender and pump aperture on top of the...

Pads Brake Front Rrsport Bm - Discovery 4

Swivel Housing Gaiter Kit - protective rubber gaiters for the front axle swivel housing balls, within the front axle drive shaft and hub assembly. ...

Heater Blower Motor Resistor for the heating and air-conditioning system. It regulates the current supplied to the blower motor, setting the fan s...

Gasket

Ride Height Sensor for the front air suspension. Mounted between the body and the front suspension link, the sensor measures suspension travel and...

Ignition Coil for the 2.0L four-cylinder petrol engine (AJ200 / AJ20P4, including PHEV). This is a coil-on-plug unit that mounts directly on the sp...

Rear Door Latch for the right-hand rear door. This is a power-operated double-locking latch with a dead-lock function, retaining the door closed an...

Sensor - Height

Front Mudflaps - moulded flaps mounted behind the front wheel arches to catch the spray, mud and stones thrown rearward by the front tyres. They r...

Radiator Hose fitted as the upper (top) hose in the engine cooling circuit, between the engine coolant outlet and the radiator inlet. Carries hot ...

Fuel Rail Pressure Sensor for the high-pressure fuel system of the 3.6-litre V8 (TDV8) turbo-diesel, right-hand cylinder bank. The sensor mounts o...

Sensor Assembly

Ride Height Sensor for the suspension and automatic headlamp levelling system. This sensor measures ride height at the rear left-hand corner of th...

Sensor Assembly

Gasket Set for the cylinder head and upper engine of the 2.5 litre six-cylinder M51 diesel, used when the head is removed for decarbonising or over...

Air Suspension Compressor Cover - Lower is the lower half of the protective housing that encloses the air suspension compressor. It shields the co...

Split Pin for the power steering box drop-arm retaining nut. It passes through the slots of the castle nut and the drilled drop-arm shaft, and its...

Piston Ring Set for the 5.0L V8 AJ133 petrol engine, supplied at standard bore size. The ring pack seals the combustion chamber against the cylind...

Thermostat Housing Gasket seals the joint between the thermostat housing (water outlet) and the cylinder head within the cooling system. It mainta...

Rear Upper Suspension Arm Bush for the rear knuckle and suspension arm assembly. The same bush is used at both the front and the rear pivot of the ...