Range Rover Parts

Drive Belt Tensioner Pulley for the auxiliary (accessory) drive belt. The pulley bears against the drive belt, maintaining correct tension as the ...

Fuel Sender Cover seals the top of the in-tank fuel sender unit and incorporates the fuel filter. Fitted to 5.0L V8 petrol applications.

Braided Brake Hose Kit, extended by 40mm, covering the flexible sections of the hydraulic brake circuit between the chassis-mounted brake pipes and...

Lambda Sensor - oxygen sensor for the middle position on the right-hand cylinder bank, within the exhaust emissions control and engine management s...

Oil Strainer for the LT77 and R380 five-speed manual gearboxes, located in the rear extension case. Filters the gearbox oil drawn by the internal ...

Valve Stem Seal - valve train sealing component in the cylinder head of the 2.2L Td4 diesel engine. The seal fits over the valve stem at the top o...

ABS Sensor - front wheel speed sensor, part of the anti-lock braking and vehicle dynamics sensing circuit. The sensor mounts at the front hub carr...

Front Mud Shield for the LT230 transfer box. Fits at the transfer box front output flange, shielding the output shaft oil seal from mud and debris...

Front suspension bump stop - part of the front strut and coil spring assembly. The moulded rubber bump stop is fitted over the strut piston rod, b...

Thrust Washer for the front axle swivel pin housing. The washer sits at the swivel pin bearing to set end-float and carry thrust loads within the ...

Idler Pulley - Drive Belt guides the accessory drive belt around its path at the front of the engine, mounted on the alternator bracket. The freel...

Drive Plate (flexplate) couples the V8 petrol engine crankshaft to the automatic transmission torque converter. The drive plate bolts to the rear ...

Camber Bush Set for the front radius arms, 38mm wide. The bushes locate in the front radius arm mountings and set the caster and camber geometry o...

Coil Spring is a light-duty rear suspension coil spring that raises ride height by approximately 40mm over standard. The light-duty rate suits a s...

Seat Base Trim Set that covers the lower seat base frame, supplied as a matched left- and right-hand pair (391525 LH and 391524 RH).

Steel Ball - 9/32 inch steel ball used in the steering column assembly. Supplied individually. Ball diameter 9/32 inch (7.14 mm).

Front Drive Flange Spacer for the LT230 transfer box. Fits on the transfer box front output shaft behind the drive flange, setting the correct sha...

Drive Belt Tensioner for the front-end accessory drive of the 4.4L V8 petrol and 4.2L V8 supercharged engines. The tensioner consists of a spring-...

Transmission Oil Cooler for the 6-speed AWF21 automatic gearbox. Dissipates heat from the automatic transmission fluid to keep the gearbox within ...

Lower Timing Cover Gasket - sealing gasket for the joint between the lower timing cover and the cylinder block on the AJ-series 4.4L V8 and 4.2L su...

Coolant Temperature Sensor - engine coolant temperature sensor for the AJ-series 4.4L V8 and 4.2L supercharged V8 petrol engines. The sensor is a ...

Inlet Manifold Gasket sealing the inlet manifold to the cylinder head. Seals the charge-air path between the manifold and the head on the 2.0L Td4...

Timing Cover Gasket sealing the front timing cover to the cylinder block on the 4.4L AJ V8 petrol and 4.2L V8 supercharged engines. The gasket sea...

Cylinder Head Gasket Set for the 4.4L M62 V8 petrol engine, supplying the top-end sealing gaskets renewed when the cylinder heads are removed and r...

Oil Pump for the 2.2L DW12 diesel engine, part of the engine lubrication system. Driven from the crankshaft, it draws oil from the sump and delive...

Clutch Slave Cylinder Assembly Concentric (hydraulic) clutch slave cylinder for the six-speed manual gearbox. Mounted concentrically around the ge...

Top Radiator Hose connects the engine outlet to the upper radiator inlet, carrying hot coolant from the engine to the radiator to be cooled. It fo...

Door Lock Control Cable - a control cable within the door linking the lock mechanism to the latch, transferring locking and unlocking movement.

Valve Guide for the cylinder head valve train of the Rover V8 petrol engine. The guide is an interference fit in the cylinder head and locates the...

Hood Release Cable for the bonnet release mechanism, right-hand drive configuration. The cable connects the interior release lever to the bonnet l...

Window Regulator for the rear left-hand door, part of the door glass and regulator assembly carried behind the door trim casing. The regulator car...

Service Kit - 5.0L V8 Petrol

Brake Disc for the rear axle, internally vented type. Part of the braking system, providing the friction surface the rear pads clamp against to sl...

Camshaft Cover for the 3.0L supercharged V6 petrol engine. Encloses the camshaft and valvetrain at the top of the cylinder head, sealing the valve...

Piston Ring Set for the 4.4L M62 V8 petrol engine, standard size, grade 0. The rings seal the combustion chamber against the cylinder bore, transf...

Brake Disc for the rear axle, internally vented type. Part of the braking system, providing the friction surface the rear pads clamp against to sl...

Powertrain Mount Insulator locating the transmission/powertrain mounting bracket. The rubber-to-metal insulator supports the powertrain against th...

Piston Assembly for the 3.0L M57 D30 6-cylinder diesel engine, standard size. The piston transfers combustion pressure to the connecting rod and, ...

Parking Brake Cable - Right-Hand Side, part of the electric parking brake system. The cable transmits the output of the electric parking brake act...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

Air Mass Meter (mass air flow sensor) for the M62 B44 4.4L V8 petrol engine, mounted in the air cleaner outlet of the intake air system. The senso...

Heated exhaust gas oxygen (HEGO) sensor, front (pre-catalyst) position, for the 4.4L V8 petrol engine (M62 B44). The sensor sits in the exhaust up...

Rear Brake Caliper, supplied without brake pads. The caliper houses the piston that clamps the brake pads against the disc under hydraulic pressur...

Rear Brake Caliper, left-hand side, supplied without brake pads. The caliper houses the piston that clamps the brake pads against the disc under h...

V Belt Accessory drive belt for the 2.4L four-cylinder VM turbo diesel engine. Transmits drive from the crankshaft pulley to the alternator and wa...

Engine Lifting Bracket for the front of the 2.5L 200 TDi and 300 TDi diesel engines. The bracket bolts to the engine and provides a rated lifting ...

Wheel Hub for the rear axle assembly. The hub mounts to the rear suspension upright and carries the road wheel and brake disc on its machined flan...

Front Radius Arm Bump Stop is a travel stop mounted at the front radius arm within the front suspension. It limits axle-to-chassis travel and cush...