Range Rover Parts

Suspension Arm – Front Upper – RH is the right-hand upper control arm of the front independent suspension. It links the top of the wheel upright t...

Brake Caliper - front left-hand caliper within the front braking circuit. It houses the pistons and brake pads and clamps them against the front br...

Brake Caliper - rear right-hand caliper within the rear braking circuit. It houses the piston and brake pads and clamps them against the rear brake...

Rear Lower Suspension Arm Kit - RH - the right-hand rear lower control arm (wishbone) supplied with its mounting nuts and bolts, for vehicles with ...

Caliper - Assembly - Rear LH - RS3 R5

Caliper - Assembly - Rear LH - RS3 R5

Caliper - Assembly - Rear RH - RS3 R5

Caliper - Assembly - Rear RH - RS3 R5

Gas Strut supports the tailgate, one of the gas-filled struts that carry the tailgate on its hinges. The strut extends under gas pressure to raise...

Front Ride Height Sensor - left-hand side. Position sensor in the electronic air suspension system, linked between the front suspension arm and the...

Mirror Housing Cover for the exterior door mirror assembly, left-hand side. The cover is the outer cap that fits over the mirror housing to enclos...

Mirror Housing Cover for the exterior door mirror assembly, right-hand side. The cover is the outer cap that fits over the mirror housing to enclo...

EGR Valve for the exhaust gas recirculation circuit of the 2.7L TDV6 diesel engine, serving the right-hand cylinder bank. The valve meters a contr...

EGR Valve for the left-hand cylinder bank of the 2.7L TDV6 diesel engine, part of the exhaust gas recirculation system. The valve meters a control...

Front Brake Caliper for the left-hand side, part of the front disc brake assembly. The caliper mounts over the front brake disc and houses the hyd...

Brake Caliper for the right-hand front, part of the front disc brake assembly. It mounts over the brake disc and houses the hydraulic pistons and ...

Headlamp Washer Jet for the left-hand side, part of the headlamp cleaning system and mounted behind the front bumper. Under pressure from the wash...

Engine Overhaul Gasket Kit for the 4.4L AJ-V8 EFI petrol engine, consolidating the gaskets and oil seals required when the engine is dismantled for...

Chrome Side Vent for the right-hand front wing. Exterior trim fitted to the side of the front wing as a styling feature, finished in chrome. Mount...

Drive Shaft for the front axle assembly, left-hand side. Transmits drive from the front differential output to the left-hand front wheel hub, acco...

Diff Overhaul Kit - Full - Rear

Wheel Arch Repair Panel for the right-hand front wheel arch, part of the outer body structure. The panel reproduces the curved section of bodywork...

Mudshield for the front brake assembly, left-hand side. The mudshield mounts behind the front brake disc, shielding the disc and hub from road deb...

Mudshield for the front brake assembly, right-hand side. The mudshield mounts behind the front brake disc, shielding the disc and hub from road de...

Half Shaft for the rear axle drive, left-hand side, 24-spline. The half shaft transmits drive from the rear differential to the rear hub. Its inne...

Half Shaft for the rear axle drive, right-hand side, 24-spline. The half shaft transmits drive from the rear differential to the rear hub. Its inn...

Propshaft Spacer Kit for the driveline, fitting between the differential drive flange and the propeller shaft to add 15 mm of length. When a suspe...

Handbrake Cable - left-hand cable in the mechanical parking brake actuation. It transmits the applying force from the parking brake mechanism to t...

Half Shaft - LH (Left-Hand), part of the Rear Axle Drive Assembly on the Defender 90, 110, and 130. This half shaft transmits drive torque from th...

Front Radius Arm Mount is the chassis bracket that anchors the front radius arm to the chassis on the left-hand side. The radius arm controls fore...

Transmission Sleeve - an external component of the M66 six-speed manual transmission, fitted during assembly or repair of the gearbox's external fi...

Shock absorber bracket RH

Shock absorber bracket LH

Alternator Pulley mounts on the alternator drive shaft and transfers rotation from the auxiliary drive belt to the alternator rotor. This is a 49m...

Dust Cap for a brake bleed nipple. This small protective cover fits over the bleed screw on a brake caliper or wheel cylinder. It keeps dirt and m...

Rear Inner Sill - Right-Hand structural body panel for the Range Rover Classic bodyshell. The inner sill runs along the lower edge of the body, fo...

sleeve 622538

Inlet Manifold Gasket seals the joint between the inlet manifold and the cylinder head on the 2.5L VM turbo diesel engine. It maintains the air se...

Rear Inner Sill - Left-Hand structural body panel for the Range Rover Classic bodyshell. The inner sill runs along the lower edge of the body, for...

Mainshaft Circlip - LT77 is a retaining circlip fitted to the mainshaft of the LT77 5-speed manual gearbox. It locates in a groove on the mainshaf...

Bumper Mounting Spacer sets the standoff between the bumper and its chassis mounting point. It is fitted between the bumper mounting bracket and t...

Oil Pump Gear Set - the gear set for the oil pump of the LT77 five-speed manual gearbox. The pump is housed in the gearbox extension casing and cir...

Alternator – V8 Petrol – Narrow Polyvee Belt The engine-driven charging unit that powers the electrical system and maintains battery charge. Lucas ...

Distributor for the V8 EFI petrol engine, part of the ignition system. Driven from the camshaft, it routes the high-voltage output from the ignitio...

Oil Separator Drain Hose - Engine Breather is the rubber drain hose that returns separated oil from the crankcase breather oil separator back to th...