Range Rover Parts

Shock Absorber A hydraulic telescopic shock absorber (damper) for the front suspension. It damps spring oscillation to control body movement and m...

Vacuum Advance Unit for the ignition distributor on the 3.5L V8 petrol engine. This vacuum capsule mounts on the side of the distributor and conne...

Conrod Bearing Set - V8 (0.020" Undersize) is a complete set of big-end bearing shells for the connecting rods of the Rover V8 petrol engine. The ...

Bumper Mounting Bracket - front bumper mounting, left-hand side. This bracket forms part of the front bumper mounting and secures the bumper to th...

M5 blind rivet nut (nutsert) - a threaded insert for sheet-metal and box-section fixings. The nutsert is placed in a single drilled hole and set w...

Window Regulator for the right-hand front door, operating the manual window lift mechanism. The regulator converts the rotation of the winder hand...

Polyurethane Suspension Bush Set in the black compound, for the front and rear coil-sprung suspension. This is a full-vehicle set that replaces the...

Trailer Plug - a 7-pin towing electrics connector. Wired into the towing vehicle's harness, it mates with the trailer or caravan socket to feed th...

Clutch Master Cylinder - the pedal end of the clutch hydraulic circuit. Actuated by the clutch pedal pushrod, it generates the hydraulic pressure t...

lead link pump washer 90/110 used to fit newer style washer pumps to earlier vehicles

Rear Lamp Gasket for the rear lamp assembly. The gasket seals the joint between the rear lamp body and the vehicle bodywork, preventing water ingre...

Bolt securing the exhaust manifold on the Rover V8 petrol engine. A 3/8" UNC x 1 1/8" fastener used to retain the exhaust manifold to the cylinder...

Differential Shim, 0.074in, used during differential build to set bearing preload and gear alignment. It sits against the differential carrier sid...

Crankshaft Thrust Washer - 0.0075in oversize, supplied as a pair. Fitted at the centre main bearing of the four-cylinder engine to control cranksh...

Nut A 4BA hex nut used as a threaded fastener. Applied on the door lock linkage and rear bumper mountings.

Headlamp Box is the pressed-steel mounting panel that forms the left-hand (nearside) headlamp recess within the front wheelarch and valance assembl...

Side Step Set - a pair of rubber-topped side steps with a chevron tread surface, mounted along the lower body to provide a foothold when entering a...

Exhaust Tailpipe Silencer for the V8 petrol exhaust system on the Range Rover Classic. Fitted at the rear of the exhaust assembly, this silencer f...

Heater Matrix is the cabin heat exchanger inside the heater assembly. Engine coolant is routed through the matrix core while the blower draws air ...

Steering Column Universal Joint - the lower joint in the steering column linkage. The universal joint connects two angled sections of the steering...

Mainshaft for the LT77 five-speed manual gearbox, Suffix H specification. The mainshaft is the gearbox output shaft. It carries the synchroniser h...

Kickdown Cable for the automatic transmission, part of the gearbox control linkage. The cable links the engine throttle/injection control to the a...

Washer pump assembly

Exhaust Valve for the cylinder head valvetrain of the 3.5 V8 petrol engine. The exhaust valve opens to release burnt gases into the exhaust port a...

Inlet Valve for the cylinder head valvetrain of the 3.5 V8 carburettor petrol engine. The inlet valve seals the intake port against combustion pre...

Piston Assembly for the 2.5L 200 TDi turbo diesel, forming part of the piston and connecting-rod assembly within the cylinder block. The piston tr...

Screw used as a body and underbody fixing across several assemblies, including the tailboard striker, the folding side-door step assembly, and the ...

Tow Ball & Pin Hitch Assembly for the towing system, mounting to the rear towing bracket. The assembly combines a tow ball for standard ball-c...

Headlamp Box is the pressed-steel mounting panel that forms the right-hand (offside) headlamp recess within the front wheelarch and valance assembl...

Kit master cylinder

Regulator & Brush Assembly - the combined voltage regulator and brush box fitted to Lucas alternators in the charging circuit. The unit mounts...

Distributor Base Plate - the base plate assembly inside the V8 distributor, carrying the magnetic pick-up for the electronic ignition. The pick-up ...

Coolant Level Sensor for the expansion tank in the engine cooling system. Fitted to the coolant expansion tank, the sensor uses an internal float ...

Propshaft Nut - Rear - nut retaining the rear propshaft flange at the rear differential pinion. The nut clamps the propshaft coupling flange again...

Exhaust Assembly for the V8 EFI petrol engine, catalyst-equipped specification. This assembly routes exhaust gas from the engine through the catal...

Front Exhaust Downpipe for the VM 2.5 Turbo Diesel engine. The front downpipe connects the turbocharger outlet to the centre section of the exhaus...

Centre and Rear Exhaust Silencer for the VM 2.5 Turbo Diesel engine. This assembly forms the centre and rear sections of the exhaust system, atten...

Top Radiator Hose for the engine cooling circuit on the 2.5L VM Turbo Diesel engine. Connects the thermostat housing outlet on the engine to the u...

Oil Cooler Hose for the engine oil cooling circuit on the V8 engine. Forms part of the hose assembly linking the engine oil cooler to the oil circ...

Exhaust Pipe for the 3.5L V8 EFI exhaust system, catalyst configuration. The pipe forms part of the exhaust gas path on catalytic-converter-equipp...

Rear Bumper Bracket mounts the rear bumper to the chassis, forming part of the rear bumper assembly. This right-hand bracket provides the fixing p...