Range Rover Parts

Wheel Chock for securing a stationary vehicle. Placed against a tyre, the wedge-shaped chock prevents the vehicle from rolling when parked on an i...

strap MTC8527

bracket 390384

Dash Assembly Bracket - a structural support bracket forming part of the dashboard (fascia) assembly. The bracket provides a fixing point within t...

Oil Filter Housing Cover is the cover for the cartridge-type oil filter assembly on 3.0 GDI petrol and 5.0 AJ-V8 engines. This cover retains the r...

Inlet Manifold distributes incoming charge air to the cylinder head inlet ports, forming part of the air intake system on the 3.0L V6 diesel engine...

Heater Hose for the Range Rover L322 heating circuit, fitted to the M62 B44 4.4L V8 Petrol engine. The heater hose carries hot engine coolant from...

Exhaust Manifold Gasket - Right for the exhaust manifold assembly on AJ-V8 4.4L Petrol and 4.2L Supercharged petrol engines. This gasket seals the...

Exhaust Manifold Gasket seals the joint between the exhaust manifold and the cylinder head within the exhaust assembly. It maintains a gas-tight s...

Rear Silencer - Left-Hand in the dual exhaust system of the Range Rover Sport L320 fitted with the 5.0L SC V8 petrol engine (AJ133). The rear sile...

Rear Silencer - Right-Hand in the dual exhaust system of the Range Rover Sport L320 fitted with the 5.0L SC V8 petrol engine (AJ133). The rear sil...

Exhaust Insulator in the exhaust mounting assembly. The insulator is a rubber mounting that suspends the exhaust system from the vehicle underfram...

Rear Exhaust Clamp in the rear exhaust assembly. The clamp secures the joint between adjacent sections of the rear exhaust, compressing around the...

Air Filter - the air cleaner element for the engine air intake system. The element sits within the air cleaner housing and filters incoming air be...

O-Ring - Fuel Injector - Diesel - sealing ring in the fuel injector and pipe assembly on diesel engines. The ring seals the injector joint against...

Oil Filter filters the engine oil on the 2.0L 16V turbocharged petrol engine. Part of the oil cooler and filter assembly, it removes contaminants ...

Fuel Tank Inspection Plate Seal is a rubber sealing gasket for the fuel tank inspection plate in the fuel tank assembly. The inspection plate prov...

Clip - retaining for rubbing strip - rear quarter

Clip - Tailgate Finisher is a retaining clip for the upper tailgate finisher trim. It secures the finisher panel to the tailgate.

Fuel Filter for the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). The filter removes contaminants and water from the diesel fuel supply ...

Fog Lamp Bezel - right-hand side. This exterior trim surround frames the front fog lamp where it sits in the front bumper, finishing the aperture a...

Electronic Exhaust Valve Actuator for the sports exhaust system, fitted to 2.0L AJ200 and AJ20P4 petrol engines. The actuator drives the exhaust b...

Metering Valve for the fuel injection system of the 4.4L V8 TDV8 diesel engine. Mounted on the high-pressure fuel pump assembly, the metering valv...

Inlet Manifold Sensor for the 4.4L V8 TDV8 Diesel engine management system. This sensor monitors pressure and temperature within the intake manifo...

O-Ring, 76.5mm, used in the engine cooling circuit to seal the coolant pump (water pump) and thermostat housing joints. The O-ring maintains a lea...

Plain Washer

Front Anti-Roll Bar Bush for the front stabiliser (anti-roll) bar. The bush locates the anti-roll bar to its mounting, permitting controlled rotat...

Exhaust Manifold Gasket sealing the exhaust manifold flange to the cylinder head exhaust ports. It forms the gas-tight joint between the manifold ...

Oil Drain Plug Gasket for the transfer case drain plug. Sealing washer fitted between the drain plug and the transfer case to prevent oil leaks.

A/C Compressor Line Tube is a refrigerant line in the air-conditioning circuit, routing between the compressor and the condenser. It carries refri...

Fuel Rail Pressure Sensor for the 4.4L V8 TDV8 diesel engine, fitted within the high-pressure common-rail fuel injection system. The sensor monito...

Rear Mudflap Bracket for the Range Rover Classic body. This bracket mounts to the rear bodywork to carry the rear mudflap, positioning it correctl...

Wheel Centre Cap for steel road wheels, finished in black. Fits over the wheel centre and covers the wheel nuts. Supplied individually; four are r...

Screw is a fixing screw used to secure exterior lamp, interior lamp and trim components to the body. It retains fittings such as the high-level st...

NOx Trap Temperature Sensor is an exhaust gas temperature sensor within the diesel exhaust aftertreatment system, mounted in the exhaust stream at ...

Rear Right-Hand Ride Height Sensor within the air suspension and headlamp levelling systems. This rotary position sensor mounts to the right-hand ...

Inlet Manifold - LH

Fuel Filter Element - the in-line fuel filter element on the front fuel supply lines. It removes particulate contamination from the diesel supply ...

Air Filter for the engine air intake system. The element installs in the air cleaner housing and traps airborne dust and debris from the incoming a...

Oil Filter - the replaceable cartridge element for the engine lubrication circuit, fitted inside the filter housing on the oil pump, cooler and fil...

Oil Filter for the engine lubrication system of the 4.4L V8 petrol (EFI) and 4.2L V8 supercharged petrol engines. The filter removes wear particle...

Oil Filter - element-type (cartridge) oil filter for the engine oil filter housing on the 3.6L TDV8 diesel (Lion) engine. The replaceable filter e...

Fuel Return Tube for the 2.7L TDV6 diesel engine. This tube forms part of the fuel return circuit, routing excess fuel from the injectors or fuel ...

Cowl Topper Panel - Outer - LHD

Plastic Rivet used to secure interior trim and body panels in position. Push-fit fastener that replaces a lost or damaged original rivet.

Hub Nut - M24 x 2.0 for wheel hub and bearing retention. This M24 x 2.0 metric hub nut secures the wheel hub or halfshaft flange onto the stub axl...

Transfer Case Support bracket that carries the intermediate bearing of the front axle drive shaft where the shaft runs from the transfer case. It ...