Range Rover Sport L320 Parts

Shaft - Steering

Strap Assembly - Fuel Tank

Front Fog Lamp - Left-Hand for the front bumper lighting assembly. This lamp mounts in the front bumper fog lamp aperture and provides supplementa...

Front Fog Lamp - Right-Hand for the front bumper lighting assembly. This lamp mounts in the front bumper fog lamp aperture and provides supplement...

Engine Oil Cooler Assembly - heat exchanger within the oil cooler and filter assembly of the 4.2L V8 supercharged petrol engine. Engine oil is rou...

Anti-Roll Bar for the front suspension, forming part of the Active Anti-Roll Bar system. The bar links the left- and right-hand front suspension s...

Lazer ST4 Evolution LED Spotlight - a compact four-LED auxiliary driving lamp producing a controlled long-range beam for forward illumination. The...

CANNY is an advanced CAN interface developed by Lazer Lamps that enables the seamless installation of auxiliary lights on modern vehicles equipped ...

CANNY is an advanced CAN interface developed by Lazer Lamps that enables the seamless installation of auxiliary lights on selected vehicles utilizi...

Belt Tensioner Pulley for the upper primary position of the auxiliary drive belt on AJ-V8 engines, covering the 4.4L V8 and 4.2L V8 Supercharged va...

Dual Note Horn - the audible warning horn assembly, part of the electrical system, supplied as a matched pair on a common mounting bracket. The se...

Timing Tool Set for setting and locking the valve timing on the 2.7L V6 diesel (Td6) engine during front timing belt replacement. The set holds th...

Exhaust Mounting Rubber Insulator fitted within the exhaust system support assembly to suspend and isolate exhaust pipe sections from the vehicle b...

Parking Brake Cable Bracket for the left-hand side of the parking brake actuation circuit. The bracket secures the parking brake cable to the rear...

RH bracket for fitting parking brake cable to suspension arm

Front Door Latch for the left-hand front door. The latch secures the door to the body striker and integrates the central-locking and dead-lock mec...

Fuel Injector for the high-pressure common rail fuel injection system on the 2.7 TDV6 diesel engine. The injector mounts in the cylinder head and d...

Exhaust Manifold Gasket seals the joint between the exhaust manifold and the cylinder head within the exhaust assembly. It maintains a gas-tight s...

Brake Disc is a vented front brake rotor for the front-axle braking assembly. The disc mounts to the front hub and rotates with the wheel. The bra...

Front Door Latch - the latch and locking mechanism for a front door, part of the door lock controls. It secures the door to the striker on the body...

Front Door Latch - the latch and locking mechanism for a front door, part of the door lock controls. It secures the door to the striker on the body...

Wiring Harness - Rear Bumper Parking Aid is the sub-harness that runs inside the rear bumper and connects the rear parking aid sensors to the vehic...

Belt Tensioner - 4.4 V8 AJ is the automatic tensioner of the accessory (auxiliary) drive belt system, holding the correct running tension on the pr...

Brake Disc - rear axle, internally vented, for the 5.0L supercharged V8 petrol (AJ133) installation. The disc provides the friction surface that t...

Gasket cylinder head Grade 3, 3 Hole, 1.22 MM Multi layered steel Reinz

Lower Front Suspension Arm Ball Joint - 35 mm The lower ball joint forms the bottom pivot between the front lower suspension arm and the wheel knu...

Drive Belt Tensioner for the auxiliary drive belt on the 2.7L and 3.0L TDV6 diesel engines. The spring-loaded tensioner maintains correct tension ...

Injector Refit Kit - Cylinders No.3 and No.4 supplies the parts renewed when a fuel injector is removed and refitted, within the fuel injectors and...

Front Brake Caliper Bracket - left-hand side. Caliper carrier (anchor bracket) in the front brake assembly, bolting to the hub carrier and locating...

Front Brake Caliper Bracket - right-hand side. Caliper carrier (anchor bracket) in the front brake assembly, bolting to the hub carrier and locatin...

CV-Joint GKN

Cylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...

Thermostat for the engine cooling system, supplied complete with its sealing ring. The thermostat is located in the base of the thermostat housing...

Front Cover Gasket for the timing gear cover, sealing the front cover to the cylinder block. Fits the 2.7L and 3.0L TDV6 diesel V6 engines. The ga...

Head Gasket - V8 - LH seals the left-hand cylinder head to the engine block on the 4.4L AJ-V8 petrol engine. It forms the gas-tight joint between ...

Shock Absorber is a rear hydraulic damper in the rear suspension, controlling spring oscillation between the rear axle and the body. It is a direc...

Brake Caliper - Rear - RH is the right-hand rear caliper of the disc brake assembly. Under hydraulic pressure from the rear brake circuit, it clam...

Rear Brake Caliper - Left-Hand is part of the rear braking assembly, mounting over the rear brake disc on the left-hand side of the vehicle. The c...

Rear Anti-Roll Bar Bush for the rear stabiliser (anti-roll) bar. The bush locates the anti-roll bar to its mounting bracket, permitting controlled...

Screw - an M6 x 20 mm pan-head setscrew with a Torx drive, used as a general multi-application fastener. The Torx socket gives positive tool engag...

Bolt for the TDV6 2.7L and 3.0L diesel engine, used in the engine timing system assembly.

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...

Parking Sensor Speaker is the audible warning speaker for the rear parking aid system. It produces the proximity warning tone driven by the parkin...

Inner Tie Rod for the rack-and-pinion steering linkage. The inner tie rod threads into the end of the steering rack and houses the inner ball join...

Pollen Filter for the cabin ventilation system, installed in the HVAC air intake housing. It traps pollen, dust and airborne particulates from the...

Flange Bolt Hex-head flange bolt, M8 x 1.25 x 80mm. General-purpose fastener used in chassis frame and component mountings.

Air to Coil Conversion Kit - plus 2" ride height. Replaces the electronic air suspension with coil springs and dampers at all four corners. The ki...

Brake Pad Set for the rear axle, forming the friction pair against the rear brake discs within the rear braking circuit. This set covers both rear...