Range Rover Sport L494 Parts

Piston assembly - piston for the AJ133 5.0L supercharged V8 petrol engine, in the standard (nominal production) bore size. The piston runs in the ...

Drive Belt Tensioner - maintains correct tension on the front accessory (auxiliary) drive belt. The sprung tensioner assembly applies constant loa...

Oil Pump for the engine lubrication system. It draws oil from the sump and pressurises it through the lubrication circuit to the engine's bearings ...

Secondary Drive Belt Idler guides and maintains tension on the secondary (supercharger) drive belt within the front-end accessory drive. The idler...

Oil Cooler Assembly - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the coole...

Oil Filter and Cooler is a combined assembly within the engine lubrication circuit, integrating the oil filter housing with the engine oil cooler. ...

Oil Pump, the pump at the heart of the engine lubrication system. Driven by the engine, it draws oil from the sump and delivers it under pressure ...

Symposer intake sound resonator for the 5.0L supercharged V8 petrol engine (AJ133). The symposer draws pressure pulses from the inlet manifold and...

Automatic Transmission Fluid Change Kit for the ZF 8HP eight-speed automatic gearbox - transmission oil pan and fluid service. The eight-speed gea...

Inlet Valve for the cylinder head valvetrain on 2.7, 3.0 TDV6 and 3.6, 4.4 TDV8 diesel engines. The inlet valve seats in the cylinder head and con...

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

8HP Gearbox Service Kit supplies the components for a complete fluid change on the ZF 8HP70 eight-speed automatic transmission. On this gearbox the...

Brake Caliper for the front left-hand position, supplied without brake pads. The caliper houses the hydraulic pistons that clamp the brake pads ag...

Brake Calliper for the front axle, right-hand side, part of the front disc brake assembly. The calliper houses the hydraulic pistons and clamps th...

Oil Pump for the engine lubrication system. Driven by the engine, it draws oil from the sump and delivers it under pressure through the oil galler...

Exhaust Crossover Pipe carries exhaust gas between the two cylinder banks of the 3.0 V6 diesel engine, routing the outlet of one manifold across th...

Transfer Case for the four-wheel-drive driveline, mounted to the rear of the gearbox where it distributes drive between the front and rear propshaf...

Thermostat regulates coolant flow within the engine cooling system of the 3.0L V6 diesel. It remains closed during warm-up to bring the engine qui...

Spark Plug Gasket - LH seals the spark plug apertures in the left-hand cylinder head cover (cam cover). It keeps engine oil out of the spark plug w...

Oil Cooler O-Ring for the engine oil cooler and filter housing assembly. The Ø 9.5mm O-ring seals the oil-carrying joint between the engine block a...

Cam Cover Gasket seals the right-bank camshaft cover to the cylinder head on the 5.0L V8 (AJ133) petrol engine. It forms the oil-tight joint aroun...

Cam Cover Gasket seals the left-bank camshaft cover to the cylinder head on the 5.0L V8 (AJ133) petrol engine. It forms the oil-tight joint around...

Front Brake Disc - a vented front-axle brake rotor forming part of the front disc-brake assembly. The disc is bolted to and rotates with the front...

Oil Tube Gasket for the 3.0L V6 diesel engine. This sealing gasket forms a leak-free joint at an oil tube connection within the engine lubrication...

Water Pump for the engine cooling circuit on the 3.0L V6 diesel engine. This pump circulates coolant through the engine block, cylinder heads, and...

Inlet Manifold Fitting Kit - the seals and gaskets required when the inlet manifold is removed and refitted on the 3.0L TDV6 diesel engine. The ma...

Dog Guard - Upper Only - RRS

Piston ring set for the 5.0L AJ133 V8 petrol engine, in both naturally aspirated and supercharged form. Part of the cylinder block assembly – cran...

Mounting Bracket - support bracket in the suspension system. Secures suspension components to the chassis. Used in air suspension and active anti-...

Injector Retaining Bolt - M6 x 35 mm clamp bolt in the fuel injection system of the V6 and V8 diesel engines. The bolt secures the injector hold-d...

Oil Separator Seal - sealing gasket for the oil separator in the crankcase ventilation system of the 2.7 and 3.0 litre V6 diesel engines. The oil ...

The Filter Service Kit is designed for the Range Rover L405 3.0 TDV6 Diesel (2013 - 2023) and Range Rover Sport 3.0 V6 Diesel (2014 - 2022) with DP...

Upper Sump Gasket seals the upper oil sump section against the cylinder block within the engine lubrication system. It provides an oil-tight seal ...

Thermostat assembly

Alternator Assembly

Pump - Water

Arm - Front Suspension Kit RH

Front Brake Disc, internally vented, for the front braking system. The disc mounts to the front hub and provides the friction surface acted on by ...

Belt Tensioner Kit - 2.7 TDV6

Water Outlet Connection for the engine cooling system, forming a coolant outlet from the engine. The connection provides the port and hose union t...

Aluminium Intake Manifold

Aluminium Intake Manifold

Injection Pump Leak-Off Tube for the 3.0L V6 diesel engine. It carries leak-off (return) fuel from the high-pressure injection pump back to the fu...